2009 GMC YUKON DENALI key

5. Once a street has been selected the City name
category will automatically be selected for entry.
If ve or less cities are available for the selected
street, the system will display the list of cities.
If more than ve cities are available the system will
display the alpha keyboard. Start entering the
city name. If ve or less names are available,
a list will display. If more than ve are available,
there will be a screen button with a number in
it, it represents the number of available cities.
Select this button to view the list and select a city.
6. Once a city has been selected, the numeric
keyboard will display, allowing you to enter
the house number. The system will display the
house number range that is available for the street.
7. Select the Go screen button. The map screen, with
the destination marked, will display.
8. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight
the route.
9. Select the Start Guidance screen button. You are
now ready to start your route.
See “Getting Started on Your Route” later in this
section for more information.To enter a destination by entering a cross street, do the
following:
1. Press the DEST hard key.
2. Select the
6Address Entry screen button.
3. Select the Street screen button and start entering
the street name.
If ve or less names are available, a list will display.
If more than ve are available, there will be a
screen button with a number in it, it represents the
number of available streets. Select this button
to view the list.
4. Select the desired street name with the correct
prex from the list (Dr., Ln., St., etc.).
5. Once a street has been selected the Cross Street
screen button will become available. Select the
Cross Street button and start entering the cross
street name.
If ve or less names are available, a list will display.
If more than ve are available, there will be a
screen button with a number in it, it represents the
number of available cross streets. Select this button
to view the list.
2-18

6. Select the street name with the correct prex from
the list (Dr., Ln., St., etc.). An Information screen
will automatically display.
7. Select the Go screen button. The map screen,
with the destination marked, will display.
8. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight
the route.
9. Select the Start Guidance screen button. You are
now ready to start your route.
See “Getting Started on Your Route” later in this
section for more information.Point of Interest (POI)
The Point of Interest (POI) destination entry method
allows you to select a destination from the POI list.
iPoint of Interest:Touch this screen button to
access the Point of Interest (POI) screen. From this
screen you have two options to select/enter a
destination; enter the name using the alpha keyboard
or select a category from the category list.
2-19

To use the point of interest destination entry method by
entering the name, do the following:
1. Press the DEST hard key.
2. Select the
iPoint of Interest screen button.
3. Enter the POI name.
If ve or less names are available, a list will display.
If more than ve are available, there will be a
screen button with a number in it, it represents the
number of available POIs. Select this button to
view the list.
4. Select the Go screen button next to the POI.
The map screen, with the destination marked,
will display.
5. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight the
route.
6. Select the Start Guidance screen button. You are
now ready to start your route.
See “Getting Started on Your Route” later in this
section for more information.To use the point of interest destination entry method by
selecting a category, do the following:
1. Press the DEST hard key.
2. Select theiPoint of Interest screen button.
3. Select the Browse POI screen button to view the
list of POI categories.
4. Select a category, and then a sub-category.
The system will display available POI names in the
selected sub-category or if the list is too long the
system will display the alpha keyboard.
If the alpha keyboard is displayed, enter the POI
name until a list of available POIs appear. There is
a screen button with a number in it, it represents
the number of available POIs. Select this button to
view the list and select the POI.
5. Select the Go screen button next to the POI.
The map screen, with the destination marked,
will display.
6. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight
the route.
7. Select the Start Guidance screen button. You are
now ready to start your route.
See “Getting Started on Your Route” later in this
section for more information.
2-20

Address Book
The address book entry method allows you to select a
destination by selecting an address that has been
stored in your address book.
*Address Book:Touch this screen button to access
the Address Book screen. From this screen you can
select an address that already exists as the destination.To use the address book entry method, do the following:
1. Press the DEST hard key.
2. Select the
*Address Book screen button.
A list of your address book addresses will display.
3. Select the Go screen button next to the destination.
The map screen, with the destination marked, will
display.
4. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight
the route.
5. Select the Start Guidance screen button. You are
now ready to start your route.
See “Getting Started on Your Route” later in this
section for more information.
See “Adding Destinations to the Address Book”
later in this section.
2-21

Getting Started on Your Route
Once you have entered a destination there are several
functions that can be performed. Press the DEST
hard key to access the Route screen.
Turn List
Turn List:Touch this screen button to view the list of
turn maneuvers for the entire route and to avoid turns
on the route.
Q/R(Scroll Arrows):Touch the up and down arrow
screen buttons to scroll through the list of maneuvers.
Avoid:Touch this screen button, next to the adjacent
street name, to avoid the maneuver.
The map screen will display. Select the Fastest,
Shortest, or Other screen buttons. Press the Start
Guidance screen button. The route will re-calculate
without the selected avoided maneuver.
Avoid List:Select this screen button to cancel an
avoided turn. The list of selected avoided turns will
display. Select the turn to cancel the turn from being
avoided.
2-25

Add Waypoint
Add Waypoint:Select this screen button from the
Route screen. This feature allows you to add up to
three waypoints to the current route, between your
start point and nal destination. Once a waypoint has
been added, the points can be edited or deleted.To add a waypoint:
1. Press the DEST hard key.
2. Select the Add Waypoint screen button. This button
will only appear if a route has been calculated.
3. Using the desired method of entering a destination,
enter the waypoint. See “Destination” previously for
more information.
4. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and highlight
the route.
5. Select the Start Guidance screen button. You are
now ready to start your route.
6. To add the second and third waypoints, press the
DEST hard key, then select the Add screen button,
where you would like the next waypoint to fall on
the route.
7. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight the
route.
8. Select the Start Guidance screen button. You are
now ready to start your route.
2-27

To delete a waypoint from your current route:
1. Press the DEST hard key.
2. Select the Delete screen button for the desired
waypoint to delete.
3. The system will display a pop-up conrmation
message. Choose Yes to delete the waypoint;
touch No to cancel this operation.
4. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight the
route.
5. Select the Start Guidance screen button. You are
now ready to start your route.
Suspend Guidance
Press this screen button, from the Route screen, to put
the current route on hold.
Resume Guidance
Press this screen button, from the Route screen,
to resume guidance on the current route.
Cancel Guidance
Press this screen button, from the Route screen,
to cancel the current route.
Adding Destinations to the
Address Book
There are two ways to add a destination to the
address book:
To add the current nal destination to the address
book, press the Mark screen button from the map
screen. The system will automatically save the nal
destination information in the address book.
Press the Add to Address Book screen button
when available on POI information screens,
Destination Entry screens, or POI screens.
The system will automatically save this information
in the address book.
See “Nav” underConfigure Menu on page 2-30for
information on editing address book entries.
2-28

Adding or Changing Preset
Destinations
This feature allows you to add or change one of
ve preset destinations. When a destination has been
added as a preset destination, it will be available to
select from the Destination Entry screen. See “Preset
Destination” previously for information on how to select
a preset destination as a nal destination.
To store the current nal destination as a preset
destination:
1. Select the Mark screen button from the map screen
to add the current nal destination. The Address
Book screen will appear.
2. Select the Name screen button. An alpha-keyboard
will display. Enter the name.
3. Press and hold one of the buttons at the bottom of
the screen until a pop-up conrmation displays.
The name will appear in that preset destination
screen button and is now available to select from
the Destination Entry screen.To store an address book entry as a preset destination:
1. Select the MENU hard key.
2. Select the Nav screen button or press the
MENU key until the Nav screen button is selected
or touch the Nav screen button.
3. Select the Edit/View screen button.
4. Select the address book entry that you would like to
store as the preset destination. Select the Name
screen button to add a name, if needed.
5. Press and hold one of the buttons at the bottom of
the screen until a pop-up conrmation displays.
The name will appear in the that preset destination
screen button and is now available to select
from the Destination Entry screen.
2-29