2009 GMC YUKON DENALI display

Dual mode displays the route on half of the screen and
a maneuver or Interstate Exit list on the other half.
The Interstate Exit list advises of approaching exits.
Press this button to switch between dual screen and
full screen which displays the entire route.
When approximately 1/2 mi. (.08 km) from the next
maneuver, or two miles while on expressways,
the screen displays the name and a detailed view of the
next maneuver. Touch the dual mode button to hide
the detailed turn maneuver view for this maneuver only.Auto Reroute
When your destination is set and you are off the
planned route, the system will automatically plan a new
route and begin to reroute. You will be able to see
the new route highlighted on the screen.
Traveling Across Regions
If you plan to drive across many states, you may have
to change the region selected to represent the area
you are traveling to. To change the region, do one of
the following:
Change the selected region in the search area
when you get closer to your destination.
SeeDestination on page 2-15.
Change the selected region in the search area
when entering your destination and route settings.
SeeDestination on page 2-15.
For example, if you were traveling from Michigan to
Florida, change the region currently selected in
the search area to Florida. Enter a destination in
Florida under the Destination Entry menu.
2-14

Destination
Press the DEST key to access the Destination Entry
screen. From this screen, you can select from several
options to plan a route by entering destination points.
Search Area
The Destination Entry screen allows you to select the
area included in the search for your destination.
A map that divides the 48 contiguous United States,
along with Hawaii, Alaska, and a part of Canada into
13 regions is displayed.Before selecting a method of destination entry, review
the search area map to make sure your destination
is located in the highlighted region.
Touch the Change Search Area screen button to
view the Search Area screen. Touch the numbered
screen button to the left of the search area map that
corresponds with the numbered region and to view a list
of states included in the region selected. The selected
area will be highlighted on the map. Touch the down
arrow to select CAN (Canada). Touch the back screen
button to return to the Destination Entry screen and
to store the selected region.
2-15

4. Enter the city name or touch the Last 5 Cities screen
button.
The Last 5 Cities screen will display a list of the last
ve city names that had been entered. Select a city
from the list and it will appear in the City name area.
If using the alpha keyboard, nish entering the city
name. If ve or less names are available, a list
will display. If more than ve are available, there will
be a screen button with a number in it, it represents
the number of available cities. Select this button
to view the list and select a city.
5. Once a city has been selected the Street name
category will automatically be selected for entry.
Start entering the street name. If ve or less names
are available, a list will display. If more than ve
are available, there will be a screen button with a
number in it, it represents the number of available
streets. Select this button to view the list.
6. Select the street name with the correct prex
(Dr., Ln, St., etc.) from the list.
7. Once a street has been selected, the numeric
keyboard will display, allowing you to enter the
house number. The system will display the house
number range that is available for the street.8. Select the Go screen button. The map screen,
with the destination marked, will display.
9. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight
the route.
10. Select the Start Guidance screen button. You are
now ready to start your route.
See “Getting Started on Your Route” later in this
section for more information.
To enter a destination by entering the street name rst,
do the following:
1. Press the DEST hard key.
2. Select the
6Address Entry screen button.
3. Select the Street screen button and start entering
the street name.
If ve or less names are available, a list will display.
If more than ve are available, there will be a
screen button with a number in it, it represents the
number of available streets. Select this button
to view the list.
4. Select the street name with the correct prex from
the list (Dr., Ln., St., etc.).
2-17

5. Once a street has been selected the City name
category will automatically be selected for entry.
If ve or less cities are available for the selected
street, the system will display the list of cities.
If more than ve cities are available the system will
display the alpha keyboard. Start entering the
city name. If ve or less names are available,
a list will display. If more than ve are available,
there will be a screen button with a number in
it, it represents the number of available cities.
Select this button to view the list and select a city.
6. Once a city has been selected, the numeric
keyboard will display, allowing you to enter
the house number. The system will display the
house number range that is available for the street.
7. Select the Go screen button. The map screen, with
the destination marked, will display.
8. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight
the route.
9. Select the Start Guidance screen button. You are
now ready to start your route.
See “Getting Started on Your Route” later in this
section for more information.To enter a destination by entering a cross street, do the
following:
1. Press the DEST hard key.
2. Select the
6Address Entry screen button.
3. Select the Street screen button and start entering
the street name.
If ve or less names are available, a list will display.
If more than ve are available, there will be a
screen button with a number in it, it represents the
number of available streets. Select this button
to view the list.
4. Select the desired street name with the correct
prex from the list (Dr., Ln., St., etc.).
5. Once a street has been selected the Cross Street
screen button will become available. Select the
Cross Street button and start entering the cross
street name.
If ve or less names are available, a list will display.
If more than ve are available, there will be a
screen button with a number in it, it represents the
number of available cross streets. Select this button
to view the list.
2-18

6. Select the street name with the correct prex from
the list (Dr., Ln., St., etc.). An Information screen
will automatically display.
7. Select the Go screen button. The map screen,
with the destination marked, will display.
8. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight
the route.
9. Select the Start Guidance screen button. You are
now ready to start your route.
See “Getting Started on Your Route” later in this
section for more information.Point of Interest (POI)
The Point of Interest (POI) destination entry method
allows you to select a destination from the POI list.
iPoint of Interest:Touch this screen button to
access the Point of Interest (POI) screen. From this
screen you have two options to select/enter a
destination; enter the name using the alpha keyboard
or select a category from the category list.
2-19

To use the point of interest destination entry method by
entering the name, do the following:
1. Press the DEST hard key.
2. Select the
iPoint of Interest screen button.
3. Enter the POI name.
If ve or less names are available, a list will display.
If more than ve are available, there will be a
screen button with a number in it, it represents the
number of available POIs. Select this button to
view the list.
4. Select the Go screen button next to the POI.
The map screen, with the destination marked,
will display.
5. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight the
route.
6. Select the Start Guidance screen button. You are
now ready to start your route.
See “Getting Started on Your Route” later in this
section for more information.To use the point of interest destination entry method by
selecting a category, do the following:
1. Press the DEST hard key.
2. Select theiPoint of Interest screen button.
3. Select the Browse POI screen button to view the
list of POI categories.
4. Select a category, and then a sub-category.
The system will display available POI names in the
selected sub-category or if the list is too long the
system will display the alpha keyboard.
If the alpha keyboard is displayed, enter the POI
name until a list of available POIs appear. There is
a screen button with a number in it, it represents
the number of available POIs. Select this button to
view the list and select the POI.
5. Select the Go screen button next to the POI.
The map screen, with the destination marked,
will display.
6. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight
the route.
7. Select the Start Guidance screen button. You are
now ready to start your route.
See “Getting Started on Your Route” later in this
section for more information.
2-20

Address Book
The address book entry method allows you to select a
destination by selecting an address that has been
stored in your address book.
*Address Book:Touch this screen button to access
the Address Book screen. From this screen you can
select an address that already exists as the destination.To use the address book entry method, do the following:
1. Press the DEST hard key.
2. Select the
*Address Book screen button.
A list of your address book addresses will display.
3. Select the Go screen button next to the destination.
The map screen, with the destination marked, will
display.
4. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight
the route.
5. Select the Start Guidance screen button. You are
now ready to start your route.
See “Getting Started on Your Route” later in this
section for more information.
See “Adding Destinations to the Address Book”
later in this section.
2-21

OnStar®Destination Download
OnStar®Destination Download (if equipped) is a service
available for OnStar* subscribers that makes operating
your navigation system much simpler. It allows
subscribers to request and receive navigation assistance
on-the-go.
Using OnStar®Destination Download
Press the blue OnStar button and an Advisor can locate
a point-of-interest or an address and download the
necessary information or coordinates to your navigation
system. Once the destination is downloaded, the
navigation system will search for the address in the
mapping disc’s database. When the address is found,
it will be shown on your navigation system’s screen
along with the buttons described below.
Select Go, the navigation system calculates
route(s). Select a route (i.e. Shortest Route), and
Start Guidance.
Select Map, the navigation system displays the
Destination Map Screen.
Select Call, the navigation system initiates a call
to your destination with your Bluetooth phone
(if available) or OnStar Hands-Free Calling
(if minutes are available).OnStar Download Screen
2-22