2009 FORD EXPEDITION EL wheel

[x] Cancel search: wheel

Page 327 of 415

FORD EXPEDITION EL 2009  Owners Manual Fuse/Relay
Location Fuse Amp
Rating Protected Circuits
12 40A** Run/Start relay
13 30A ** Starter relay
14 — Not used
15 — Not used
16 — Not used
17 — Not used
18 30A** Trailer brake
19 60A**

Page 329 of 415

FORD EXPEDITION EL 2009  Owners Manual Fuse/Relay
Location Fuse Amp
Rating Protected Circuits
71 20A** Auxiliary power point
72 20A** Auxiliary power point
73 — Not used
74 30A** Driver power seat/DSM
75 20A* PCM – voltage power 1
76 2

Page 330 of 415

FORD EXPEDITION EL 2009  Owners Manual WARNING: Refer to Tire pressure monitoring system (TPMS)
in the Tires, Wheels and Loading chapter for important
information. If the tire pressure monitor sensor becomes damaged, it
will no longer func

Page 331 of 415

FORD EXPEDITION EL 2009  Owners Manual • Comfort and noise
• Ground clearance and parking at curbs
• Winter weather driving capability
• Wet weather driving capability
3. Full-size dissimilar spare without label on wheel
When drivi

Page 332 of 415

FORD EXPEDITION EL 2009  Owners Manual Stopping and securing the vehicle
1. Park on a level surface, activate
the hazard flashers and set the
parking brake.
2. Place the gearshift in P (Park)
and turn the engine off.
Location of the spare

Page 333 of 415

FORD EXPEDITION EL 2009  Owners Manual Removing the spare tire
1. Remove the jack handle and
winch extension from the tray and
assemble them.
2. Open the spare tire winch access
plug in the bottom of the
compartment for the jack and tools

Page 334 of 415

FORD EXPEDITION EL 2009  Owners Manual WARNING: Do not attempt to change a tire on the side of the
vehicle close to moving traffic. Pull far enough off the road to
avoid the danger of being hit when operating the jack and changing the
whee

Page 335 of 415

FORD EXPEDITION EL 2009  Owners Manual 5. Position the jack according to the
jack locator arrows found on the
frame and turn the jack handle and
extension tool assembly clockwise.
Note: Use the frame rail as the
jacking location point, NOT