2009 FIAT QUBO tow bar

4
FIAT FIORINO/QUBO NATURAL POWER
Passive safety
The Fiat Fiorino Natural Power has the
same passive safety features as the other
versions.
In particular, the cylinder location and
mountings are designed to pass the impact
tests in accordance with the Fiat safety
standards. The flow of methane coming
out of the cylinders is governed by a so-
lenoid valve that is only open during
methane operation.
The solenoid valve unit includes protec-
tion against excess flows (if the high pres-
sure system breaks, the flow of methane
is restricted to values that are not dan-
gerous), overheating (a fuse pad that al-
lows the methane to drain off if the tem-
perature exceeds 110 °C) and a pressure
calibration device that intervenes if the
pressure goes above 300 bar ensuring the
methane escapes in a controlled manner
and as quickly as possible.
The solenoid valve is connected to the Fire
Protection System (fuel cut-off system).
Active safety
The Fiat Fiorino Natural Power has the
same active safety features as the other
versions.
The Fiat Fiorino/Qubo Natu-
ral Power version is equipped
with a high pressure methane system
designed to run at a rated pressure of
200 bar.
It is dangerous to force the system
with higher pressures. When towing
or lifting the vehicle, follow the in-
structions in the main handbook in
the chapter on Towing to prevent
damage to the methane system parts.
In case of problems with the methane
system, only contact a Fiat Dealership.
Do not alter the methane system con-
figuration or components; they are
designed exclusively for the Fiat Fior-
ino/Qubo Natural Power. The use of
other components or materials may
lead to malfunctioning and compro-
mise safety.When oven painting, the
cylinders should be removed
from the vehicle and later carefully
refitted by a Fiat Dealership. Al-
though the methane system has nu-
merous safety features, it is advisable
to close the manual taps on the cylin-
ders every time the vehicle is not in
use for a long period, transported on
other vehicles or moved in an emer-
gency as a result of a breakdown or
accident.
IMPORTANTIMPORTANT
603.97.591 FiorinoQubo Nat P 1ed EN 1-12-2009 14:35 Pagina 4

7
FIAT FIORINO/QUBO NATURAL POWER3) Excess flow,intervenes if the pipes
break and limits the flow of methane ex-
iting to non dangerous levels.
The flow restrictor valve is located to al-
low it to operate even if the solenoid valve
casing is broken due to an impact.
4) Manual tap,it is located upstream of
the solenoid valve.
SOLENOID
VALVES/SAFETY
DEVICES
The solenoid valves Fig. 5and Fig. 6are
bolted directly onto the methane cylinders
with the main function of interrupting the
flow of methane to the supply circuit.
The solenoid valves are open when:
❒the switching button is in the methane
position;
❒the pressure in the cylinder is sufficient
for operation;
❒the engine is running.
The solenoid valve assembly is equipped
with the following safety devices:
1) Fuse pad,in the case of overheating
(temperature above 110 °C), it totally
eliminates the danger of excess pressure
making the methane in the cylinder flow
out as quickly as possible in a controlled
manner.
2) Mechanical excess pressure device
(Burt Disk),in the case of excess pres-
sure (above 330 bar), it ensures that the
methane escapes as quickly as possible in
a controlled manner.It separates the cylinder from the methane
system to allow maintenance operations.
The taps are accessible from outside the
vehicle and are located, in the case of the
lengthwise middle cylinder, at the rear of
the cylinder and, in the case of the trans-
verse rear cylinder, towards the wheel
right side.
To close the taps D-Fig.7: turn the knob
in the direction (1) shown by the arrow
(clockwise
OFF).
To open the taps D-Fig.7: turn the knob
in the direction (2) shown by the arrow
(anticlockwise
ON).
5) Check valve,this prevents the
methane from flowing back to the filler.
Fig. 5F0T0347m
Fig. 6F0T0348m
Fig. 7
1
2
D
F0T0349m
603.97.591 FiorinoQubo Nat P 1ed EN 1-12-2009 14:35 Pagina 7

17
FIAT FIORINO/QUBO NATURAL POWER
Versions Versions
Cargo Minimum” Cargo Maximum”
1180 1260
500 420
425 345
900 900
950 950
1680 1680
––
––
100 100
––Versions Versions
Combi M1 5P Qubo M1 5P
1270 1290
480 460
405 385
950 950
950 950
1750 1750
––
––
100 70
––
WEIGHTS
Weights (kg)
Unladen weight (with all fluids,
fuel tank filled to
90% and without optional equipment)
Payload including
the driver (❒):
Payload excluding the driver (❒):
Maximum permitted loads (
❍)
– front axle:
– rear axle:
– total:
Towing loads
– braked trailer:
– non-braked trailer:
Maximum load on the roof
(with roof rack bars):
Maximum load on the ball joint
(braked trailer):
(
❒) In the presence of optional equipment the unladen weight increases and, as a result, the payload decreases in relation to the max-
imum permitted loads.
(
❍) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment and/on load carrying plat-
form within the maximum permitted loads.
IMPORTANT A trailer cannot be towed so there are no provisions for fitting a tow hook.
603.97.591 FiorinoQubo Nat P 1ed EN 1-12-2009 14:36 Pagina 17