2009 FIAT PANDA red warning lights

193KNOW
YOUR VEHICLE
SAFETY
CORRECT USE OF THE
CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX
ENGINE CODE – BODYWORK VERSIONSVersions Engine type code Bodywork version code
1.1
Actual – Active187A1000
(4-seat – Euro 3)169AXA1A 0A
(5-seat – Euro 3)169AXA1A 0AB
(4-seat – Euro 4)169AXA1A 0AC
(5-seat – Euro 4)169AXA1A 0AD
1.2
Dynamic – Emotion188A4000
(4-seat – Euro 3)169AXB1A 0B
(5-seat – Euro 3)169AXB1A 0BB
(4-seat – Euro 4)169AXB1A 0BC
(5-seat – Euro 4)169AXB1A 0BD
(*) Eco
(4-seat – Euro 4)169AXB1A 0BE(5-seat – Euro 4)169AXB1A 0BF
(4-seat – Euro 5)
169A4000169AXF1A 08(5-seat – Euro 5)169AXF1A 08B
1.3 Multijet 70 HP
Dynamic – Emotion188A8000
(4-seat – Euro 4)169AXC1A 0D(5-seat – Euro 4)169AXC1A 0DB
1.3 Multijet 75 HP (with DPF)
Dynamic – Emotion169A1000
(4-seat – Euro 4)169AXD1A 0GC(5-seat – Euro 4)169AXD1A 0GD
(*) Extended ratios to reduce CO
2
191-214 PANDA EN 7-10-2009 14:17 Pagina 193

Mc Pherson independent wheels, mechanical cross member,
shock absorbers and coil springs; anti-roll bar for versions with electric power
steering.
torsion beam with interconnected wheels consisting of a torsion axle and
two tubular arms with shock absorbers and coil springs.rack and pinion with electric power steering (where provided)
9.1
disc (self-ventilating for 1.3 Multijet engine)
drum, self-centering shoes with one control cylinder for each wheel
controlled by hand lever, working on rear brakes
196
KNOW YOUR
VEHICLE
SAFETY
CORRECT USE OF
THE CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCETECHNICAL
SPECIFICATIONS
INDEX
SUSPENSIONS
1.1 – 1.2 – 1.3 Multijet
Front
RearBRAKES
1.1 – 1.2 – 1.3 Multijet
Service brakes:
– front– rear
Parking brake
IMPORTANT Water, ice and antifreeze salt sprinkled on the roads may deposit on the brake discs reducing braking efficiency the
first time the brakes are applied.STEERING
1.1 – 1.2 – 1.3 Multijet
Type
Steering circle (kerb to kerb) m
191-214 PANDA EN 7-10-2009 14:17 Pagina 196

197KNOW
YOUR VEHICLE
SAFETY
CORRECT USE OF THE
CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX
F0Z0111m
fig. 194
UNDERSTANDING TYRE MARKING fig. 194Example: 155/80 R 13 79T155 = Nominal width (S, distance between sidewalls in
mm).
80 = Height/width ratio (H/S) in percentage.
R = Radial tyre.
13 = Rim diameter in inches (Ø).
79 = Load rating (capacity).
T = Maximum speed rating.
WHEELSWHEELS AND TYRES
Pressed steel or alloy rims. Tubeless radial carcass tyres.
The vehicle registration document also lists all type-ap-
proved tyres.
IMPORTANT In the event of discrepancies between the
information provided on this “Owner Handbook” and the
“Vehicle registration document”, only the latter is valid.
For safe driving, the car must be fitted with tyres of the
same make and type on all wheels.
IMPORTANT Do not use inner tubes in case of tubeless
tyres.
SPACE-SAVER WHEEL
Pressed steel wheel. Tubeless tyre.
WHEEL GEOMETRY
Front wheel toe-in measured from rim to rim:
0 ±1 mm
The values refer to the car in running order.
191-214 PANDA EN 7-10-2009 14:17 Pagina 197

200
KNOW YOUR
VEHICLE
SAFETY
CORRECT USE OF
THE CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCETECHNICAL
SPECIFICATIONS
INDEX
DIMENSIONSDimensions are expressed in mm and
refer to the car equipped with its stan-
dard-supplied tyres.
Height is measured with car unladen.
F0Z0703m
fig. 195
Versions A B C D E F G HSaloon 3538 713 2299 526 1578 (**) 1357 (*) 1578 1366 (*)(*) Measurements may vary according to rim size.
(**) Without longitudinal bars 1540 mm
191-214 PANDA EN 7-10-2009 14:17 Pagina 200

Synthetic base lubricants
SAE 5W-40 ACEA C3 grade.
FIAT 9.55535- S2 specifications
Synthetic base lubricants SAE 5W-40 grade
FIAT 9.55535- N2specifications
According to
Scheduled
Servicing
Programme
According to
Scheduled
Servicing
Programme
SELENIA K P.E.Contractual
Technical Reference
No. F603.C07SELENIA WRContractual
Technical Reference
No. F515.D06
FLUIDS AND LUBRICANTSRECOMMENDED PRODUCTS AND SPECIFICATIONSUse Quality specifications of fluids and lubricants Fluids and lubricants Interval
for correct car operation genuine for replacement
Lubricants for
petrol enginesLubricants for
diesel engines For diesel engines, in the event of an emergency in which the original products are not available, lubricants with at
least ACEA B4 performance are acceptable; however, in this case optimum engine performance is not guaranteed
and the lubricant should be replaced as soon as possible at a Fiat Dealership.
The use of products with features lower than ACEA C3 – SAE 5W-40 for petrol engines and ACEA B4 – SAE 5W -40
for diesel engines could cause damage to the engine, which are not covered by the warranty.
204
KNOW YOUR
VEHICLE
SAFETY
CORRECT USE OF
THE CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCETECHNICAL
SPECIFICATIONS
INDEX
191-214 PANDA EN 7-10-2009 14:18 Pagina 204

Front
mechanicalgear-box
and differentials
Rear differential
4×4 versions
Wheel side
constant velocity
joints
Differential side
constant velocity
joints
Hydraulic brakes
and hydraulic
clutch controls
Cooling circuits Util-
isation percentage:
50% water
50% PARAFLU
UP
To be mixed with
diesel (25 cc per
10 litres)
To be used undiluted
or diluted in wind-
screen/rear window
washer/ wiper systems
Synthetic lubricant, SAE 75W-85 grade.
FIAT 9.55550-MX3specifications
Synthetic lubricant, SAE 75W-85 grade.
FIAT 9.55550-DA4specifications
Molybdenum disulphide grease for high tempera-
tures. Consistency NLGI 1-2 FIAT 9.55580speci-
fications
Polyurea based synthetic grease for high tempera-
tures. Consistency NLGI 2. FIAT 9.55580specifi-
cations
Synthetic fluid for brake and clutch systems. It pass-
es the specifications: FMVSS no. 116 DOT 4,
ISO 4925, SAE J 1704. FIAT 9.55597 specifications
Red protective agent with antifreeze action, based
on inhibited monoethylene glycol with organic for-
mula. It passes CUNA NC 956-16, ASTM D 3306
specifications. FIAT 9.55523specifications
Antifreeze additive for diesel fuel, protecting
Diesel engines
Mixture of alcohol and surfactants
CUNA NC 956-11. FIAT 9.55522specifications
TUTELA CAR
TECHNYX Contractual Technical
Reference no. F010.B05TUTELA CAR
CROSS Contractual Technical
Reference no. F804.D08TUTELA ALL
STARContractual Technical
Reference no. F702.G07TUTELA STAR
325Contractual Technical
Reference no. F301.D03TUTELA TOP 4Contractual Technical
Reference no. F001.A93PARAFLU
UP
Contractual Technical
Reference no. F101.M01TUTELA DIESEL
ARTContractual Technical
Reference no. F601.L06TUTELA PROFES-
SIONAL SC 35Contractual Technical
Reference no. F201.D02
Use Quality specifications of fluids and lubricants Fluids and lubricants Applications
for correct car operation recommended
Lubricants and
greases for drive transmission
systemBrake fluidProtective agent
for radiatorsFuel additiveWindscreen/
rear screen
washer fluidIMPORTANT Do not use fluids with different specifications for topping-up or mixing
205KNOW
YOUR VEHICLE
SAFETY
CORRECT USE OF THE
CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX
191-214 PANDA EN 7-10-2009 14:18 Pagina 205

206
KNOW YOUR
VEHICLE
SAFETY
CORRECT USE OF
THE CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCETECHNICAL
SPECIFICATIONS
INDEX
❒
extra-urban cycle: drive simulating the driving of the car
out of town with frequent acceleration in all gears; the
speed varies from 0 to 120 km/h;
❒
combined consumption: the weighting is around 37%
urban cycle and 63% extra-urban cycle.
IMPORTANT The type of route, traffic conditions, weath-
er conditions, driving style, general condition of the car,
trim level/equipment/accessories, use of the climate con-
trol system, vehicle load, presence of roof racks and oth-
er situations that adversely affect the aerodynamics or wind
resistance lead to different fuel consumption figures than
those measured.
FUEL CONSUMPTIONThe fuel consumption figures given in the table below are
determined on the basis of the homologation tests set
down by relevant European Directives.
The procedures below are followed for measuring con-
sumption:❒
urban cycle: cold starting followed by driving that sim-
ulates urban use of the car;
Consumption according to the European Directive in force (litres/100 km)Versions Urban Extra-urban Combined
1.1 – Actual – Active 7.0 4.8 5.6(*) Eco 6.6 4.1 5.0
1.2 – Dynamic – Emotion 7.1 4.8 5.6
(*) Eco 6.6 4.1 5.0(▲) 6.4 4.0 4.9
1.3 Multijet 70 HP
Dynamic – Emotion 5.4 3.7 4.3
1.3 Multijet 75 HP with DPFDynamic – Emotion 5.2 3.6 4.2(*) Extended ratios to reduce CO
2 emissions
(
▲) Euro 5 ECO versions
191-214 PANDA EN 7-10-2009 14:18 Pagina 206

207KNOW
YOUR VEHICLE
SAFETY
CORRECT USE OF THE
CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX
CO
2
EMISSIONS
The CO
2emission levels given in the following tables refer to combined consumption.
Versions CO
2emissions
according to the European Directive in force (g/km)
1.1 – Actual – Active 132
(*) Eco 119
1.2 – Dynamic – Emotion 133(*) Eco 113/119 (
▲)
1.3 – Multijet 70 HP
Dynamic – Emotion 114
1.3 – Multijet 75 HP with DPFDynamic – Emotion 110(*) Extended ratios to reduce CO
2 emissions
(
▲) Euro 5 ECO versions
191-214 PANDA EN 7-10-2009 14:18 Pagina 207