Page 13 of 34

12
INTRODUCTION
FUNCTIONS
AND
ADJUSTMENTS
RADIO
(TUNER)
CD PLAYER
CD MP3
PLAYER
CD CHANGER
(CDC) PLAYERQUICK
GUIDE
SELECTING THE RADIO
FUNCTIONS
By pressing the FMas button briefly and
repeatedly, the following audio sources
can be selected cyclically:
– TUNER (“FM1”, “FM2”, “FMA”).
By pressing the AM button briefly and re-
peatedly, the following audio sources can
be selected cyclically:
– TUNER (“MW1, MW2”).
SELECTING THE CD/
CD CHANGER FUNCTION
By briefly pressing the CD button, the
CD/CD CHANGER audio source can be
selected (only with a CD loaded).
AUDIO SOURCE MEMORY
FUNCTION
If another function is selected whilst lis-
tening to a CD (e.g. the radio), playing is
interrupted and is resumed from the same
point when returning to the CD mode.
If another function is selected whilst lis-
tening to the radio, the last station se-
lected is tuned into when returning to the
Radio mode.VOLUME ADJUSTMENT
Press VOL+ or VOL− buttons to adjust
the volume. If the volume level is changed
during the transmission of traffic news, the
new setting will only be maintained until
the news is finished.
MUTE/PAUSE FUNCTION
(bringing the volume to zero)
Press the MUTE button briefly to activate
the MUTE function. The volume will grad-
ually decrease and the text “MUTE” (in
radio mode) or “PAUSE” (in CD mode)
will be shown on the display.
Press the Mute button again to deactivate
the MUTE function. The volume will grad-
ually increase until it reaches the set pre-
viously level.
When the volume is changed using the
dedicated controls, the Mute function is
deactivated and the volume is adjusted to
the new level selected.
The Mute function will be overridden
when there is an incoming traffic alert
(if the TA function is activated) or if an
emergency alarm is received. The function
will be reactivated when the alert is over. TURNING THE CAR RADIO ON
The car radio comes on when the ON
button is pressed.
When the car radio is turned on, the vol-
ume is limited to a setting of 5 if it had
been set higher when previously used.
When the radio is turned on with the key
extracted from the ignition switch, it turns
off automatically after about 20 minutes.
After the radio has switched itself off
automatically it can be turned on for a fur-
ther 20 minutes by pressing the ON but-
ton.
TURNING THE CAR RADIO OFF
Keep button ON pressed.
F F
U U
N N
C C
T T
I I
O O
N N
S S
A A
N N
D D
A A
D D
J J
U U
S S
T T
M M
E E
N N
T T
S S
603_97_355 Radio Ducato SB08 EN 13-11-2009 10:11 Pagina 12
Page 20 of 34

19
PRESENTAZIONEINTRODUCTION
FUNCTIONS
AND
ADJUSTMENTS
RADIO
(TUNER)
CD PLAYER
CD MP3
PLAYER
CD CHANGER
(CDC) PLAYER QUICK
GUIDE
EXTERNAL AUDIO function
(phone volume adjustment)
This function makes it possible to adjust
the phone volume (setting from 1 to 40)
by turning the button/knob fig. 1 or by
pressing the buttons ÷/˜or to ex-
clude it (OFF setting).
The display shows the function current
status:
❒“EXT OFF” function deactivated.
❒“EXT 23” function activated with vol-
ume set to 23.RADIO OFF function
(on and off mode)
This function makes it possible to set the
radio switching off mode by choosing be-
tween two methods. To activate the func-
tion use the button ÷or ˜.
The chosen mode appears on the display:
❒“00 MIN”: the radio turns off in con-
nection with the ignition key; the radio
is automatically turned off as soon as the
key is turned to the STOP position;
❒“20 MIN”: the radio turns off indepen-
dently from the ignition key; the radio
remains switched on for a maximum pe-
riod of 20 minutes after the key has
been turned to the STOP position.
SYSTEM RESET function.
This function is used to restore all settings
to the factory values. The options are:
❒NO: no restore intervention;
❒YES: the default parameters will be re-
stored. During such operation, the text
“Resetting” appears on the display. At
the end of the operation, the source
does not change and the previous situ-
ation will be displayed.PHONE SET-UP
When a phone call is received, the radio
audio will be connected to the telephone
output if the hands-free kit is installed on
the car. The sound of the telephone al-
ways arrives at a fixed volume, but it is
possible to adjust it during a phone
conversation by pressing the button/knob
fig. 1.
The fixed volume of the telephone audio
can be adjusted with the Menu’s external
audio function. The text “PHONE” ap-
pears on the display during the telephone
audio deactivation.
603_97_355 Radio Ducato SB08 EN 13-11-2009 10:11 Pagina 19
Page 26 of 34

25
INTRODUCTION
FUNCTIONS
AND
ADJUSTMENTS
RADIO
(TUNER)
CD PLAYER
CD MP3
PLAYER
CD CHANGER
(CDC) PLAYER QUICK
GUIDE
INTRODUCTION
This chapter describes the variants re-
garding the operation of the CD player
only: as far as the operation of the radio
is concerned, refer to the description in
the “Functions and Adjustments” chapter.CD PLAYER SELECTION
To activate the CD player built into the
equipment, proceed as follows:
❒load a CD with the equipment switched
on: the first track will start to play;
or
❒if a CD has already been loaded, turn
on the car radio and then briefly press
the CD button to select the “CD” func-
tion mode: the last track listened to will
start to play.
It is advisable to use original CDs to en-
sure optimal playing. If CD-R/RWs are
used, we recommend using good quality
media that are mastered at the slowest
speed possible.CD LOADING/EJECTION
To load the CD, insert it gently into the
slot to activate the motorised loading sys-
tem, which will position it correctly.
The CD can be loaded with radio off and
the ignition key turned to MAR: in this
case the radio will remain off. When the
radio is turned on, the last source listened
to before being switched off, will be acti-
vated.
When a CD is inserted the display will
show the symbol “CD-IN” and the text
“READING”. They will remain displayed
for the whole time required for the radio
to read the CD. When this time has
elapsed the radio automatically starts play-
ing the first track.
C C
D D
P P
L L
A A
Y Y
E E
R R
603_97_355 Radio Ducato SB08 EN 13-11-2009 10:11 Pagina 25