54
BLUE&ME
™
in conjunction with Instant Nav
Changing the GPRS connection
code
If the mobile phone service provider re-
quires the setting for the GPRS connec-
tion to be changed, you can do this in the
ADVANCED OPTIONS menu.
?To change the GPRS connection code,
using manual interaction:
Move to the GPRS CODE menu and
press OKor
ß.
GPRS should appear on the display
with a list of digits (1, 2, 3, 4, 5, 6, 7,
8, 9), PREDEF. and DISABLE. To se-
lect a new code for the GPRS con-
nection, press
QorZuntil the de-
sired option appears, then press OK
or
ß. To choose to keep the prede-
fined value, select Predef. To disable
the connection code, select DISABLE
After having reset the GPRS connec-
tion code, the system will display the
message CODE SET.
}To set the GPRS connection code, us-
ing voice commands:
Press
‘and say “Settings” and then
“Connection code”.
The system will reply with the current
GPRS connection code and the cur-
rent value. To change it, say a num-
ber from 1 to 9 or say “Predefined”.
To disable it, say “Disable”. To change
the code, say a number from 1 to 9 or
say “Predefined”. To disable the code,
say “Disable”. (In the previous sen-
tence, the current value is the value
set for the GPRS connection code at
the time it is used).
After having set the new connection
code, the system will reply with “The
connection code is at the new value”
(In the previous sentence the new val-
ue is the value set for the GPRS con-
nection). EXIT FROM MENU SETTINGS
It is possible to exit the settings menu at
the end operation as described below.
?To exit the Settings menu, using man-
ual interaction:
Select the option EXIT and then press
OKor
ß.
}Or, through voice commands:
Press
‘and say “Exit”.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 54
