2009 FIAT CROMA key

32
BLUE&ME
™
in conjunction with Instant Nav
Call a number using the mobile
phone keypad
?With this system can also dial a phone
number using your mobile phone key-
pad and continue the phone conver-
sation using the hands free system.
To carry out this operation the tele-
phone must be registered and within
the operating range of your car’s hand
free system.
To dial a number using the mobile
phone keypad, proceed as follows:
– Dial the telephone number using
your mobile phone keypad and make
the call following the method for
your mobile phone.
– Have a phone conversation using the
hands free system.
– To end the phone call, press
ßfor
more than 1 second or end the call
using the dedicated controls for
your mobile phone. Call a number in the call log
The Last calls option is a list of numbers
of phone calls made and received. It can
contain a maximum of ten calls received,
ten calls made and five missed calls.
?To dial a phone number through man-
ual interaction, proceed as follows:
– Activate the Main Menu by pressing
ß.
– Select the Last calls option and then
press OKor
ß.
– The system will give a list of tele-
phone numbers. Use
QorZto se-
lect the desired phone number;
press OKor
ßto make the call.
– At the end of the call, press
ßfor
more than 1 second to end the call.
}Or, through voice interaction:
To call back the last person who
phoned you, press
‘and say “Last
call received”. The system will show
the information relating to the last
person who contacted you on the dis-
play and ask you if you want to call
them. To make the call, say “Yes”, oth-
erwise say “No”.
If you want to call the last you con-
tacted again, say “Last call made”. In
this case the system will show the in-
formation relating to the last person
whom you contacted on the display
and ask you if you want to call them.
To make the call, say “Yes”, otherwise
say “No”.
It is also possible to use the “Call
back” command. In this case the sys-
tem will ask “Last call made or last call
received?”. To call the last person you
phoned back, say “Made”. To call the
last person who phoned you back, say
“Received”.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 32

33
BLUE&ME
™
in conjunction with Instant Nav
MANAGE AN INCOMING CALL
You can answer incoming calls with the
hands free function using the controls on
the steering wheel. When a call is received
the system will show the caller identity in-
formation, if available. The incoming call is
signalled by the personalized ring tones of
your mobile phone (the availability of this
function depends on the specification of
your phone).
Answer a phone call
– To answer a phone call, press
ßor
select the corresponding item from the
TEL menu on the Instant Nav.
– To end a phone call, press
ßfor more
than 1 second or select the correspond-
ing item from the TEL menu on the Instant
Nav.Reject a phone call
– To reject a call, press
ßfor more than
1 second.
Ignore a phone call
– To ignore a phone call and not listen
to the ring tone, press
ßor press &on
the Instant Nav.
Answer an incoming call during a
conversation
To answer an incoming call whilst an-
other phone conversation is in progress,
press
ß. The system will switch to the in-
coming call and place the current phone
conversation on hold.
Note
On some mobile phones you can trans-
fer the ring tones assigned to the people
in your phone list to the hands free sys-
tem. In this case the system will signal the
incoming call using your mobile phone’s
personalized ring tones.MANAGE A CALL IN PROGRESS
Transfer the call from the mobile
phone to the hands free system
If you are speaking on your mobile
phone and get into the car, you can trans-
fer the phone conversation from your mo-
bile to your car’s hands free system.
Proceed as follows:
– Get into the car and turn the ignition
key to the MAR position to activate the
hands free system.
– The system will notify the mobile
phone of the possibility of activating the
hands free system.
– To transfer the conversation to the
hands free system, activate this function as
set out by your mobile phone (the pro-
cedure depends on the type of mobile
phone).
– The phone conversation will be trans-
ferred to the car’s hands free system.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 33

39
BLUE&ME
™
in conjunction with Instant Nav
The M.M. PLAYER menu allows you to:
– display the tracks saved on your USB
device
– listen to the audio files saved on your
USB device.
Note
Before using the player, in order to make
sure that your USB device is compatible
with the system, read the section on
COMPATIBLE USB MEMORY DEVICES
or the paragraph about iPod.CONNECTION OF USB DEVICE
TO THE SYSTEM
To connect your UBS device to the sys-
tem, proceed as follows:
– Copy the tracks on your USB device
(for further information, see "Technolo-
gies compatible with the system").
– For USB devices without a USB lead,
simply connect the device (directly or with
the help of an extension) to the USB port
in the car (see fig. 1).
– For USB devices with a lead, connect
one end to your USB device and the oth-
er to the USB port in the car (see fig. 1).– Turn the ignition key to MAR. The sys-
tem will automatically start playing your
digital tracks, selecting them from a library
that is created the moment the USB de-
vice is connected.
– If the AUTO PLAY function is set to
“On”, the system will automatically start
playing your digital tracks.
MULTIMEDIA PLAYER - Setting func-
tions.
When the creation of the multimedia li-
brary is over, it is possible to use the sys-
tem to display and select the tracks pre-
sent and to activate playing.
M M
U U
L L
T T
I I
M M
E E
D D
I I
A A

P P
L L
A A
Y Y
E E
R R

F F
U U
N N
C C
T T
I I
O O
N N
S S
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 39

44
BLUE&ME
™
in conjunction with Instant Nav
MULTIMEDIA PLAYER
SETTINGS (Instant Nav only)
To enter the Multimedia Player settings
menu on the Instant Nav you can:
– Select the Audio function on the
Instant Nav Menu, confirm by pressing the
OK knot to enter the Media Player, press
the OK knob again to confirm the selec-
tion and turn to select the desired item.
or
– Select the Media Player source on
Instant Nav pressing the OKor MEDIA
buttons, press the MUSICbutton and
then press the OK button/knob to confirm
the selection and turn it to select the de-
sired item.Automatic play
The Automatic play function allows you
to set the Instant Nav so that the playing
of digital audio on your USB device starts
as soon as the ignition key is turned to the
MAR position. Once this function is
turned on, the first time you use the play-
er, playing will start automatically, do it be-
fore inserting the device in the USB port
on the car and create or update the mul-
timedia library.Note
If you change the setting of the Auto-
matic play after having connected a USB
device, the new setting will only be acti-
vated the first time you connect another
USB device (or the same USB device with
the updated musical tracks library).
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 44

50
BLUE&ME
™
in conjunction with Instant Nav
REGISTERING A MOBILE
PHONE
In order to use your mobile phone with
the car’s hands free function it must be
registered. During the registration proce-
dure the hands free system will search for
a telephone with Bluetooth
®in its re-
ception range. If it finds it, it will establish
the connection using a PIN (Personal Iden-
tification Number). After having registered
your mobile phone in the system it can be
used through the hands free system.
IMPORTANT The PIN code used for
registering a mobile phone is produced
randomly by the system each time a new
phone is registered, therefore it does not
have to be memorized and if it is mislaid
it will not affect the use of the hands free
system.
The procedure for registering your mo-
bile phone only has to be carried out once;
afterwards the system will automatically
connect your phone each time you get in-
to the car and turn the ignition key to the
MAR position.You can register your mobile phone us-
ing the Registration option in the Settings
menu.
?To register through manual interac-
tion, proceed as follows:
Activate the Main Menu by pressing
ßand select the Settings option by
pressing OKor
ß.
Select the option Registration and
then press OKor
ß. The system will
launch the registration procedure.
The system will show the PIN code re-
quired for registering the mobile
phone on the panel display and it will
repeat it vocally. It is important to
know that this PIN is only used once
for registering the mobile phone and
it is not the PIN for the your SIM card.
For the two subsequent stages, con-
sult your mobile phone manual for
how to register and connect with
Bluetooth
®devices.Look, on your mobile phone, for the
option that allows you to display de-
vices with Bluetooth
®in the oper-
ating range (this option may be called
Search, New Device, etc. on your mo-
bile phone). Select “Blue&Me” from
the devices enabled for Bluetooth
®
present (the name identifies the sys-
tem on your car).
When the mobile requests it, enter
the PIN number on the panel display.
If the registration has been success-
ful, the system will say “Connection in
progress” and at the end will show the
number of the mobile phone regis-
tered on the display as confirmation.
It is important to wait for this confir-
mation message, if you press
ßor
ESCbefore this message appears you
risk cancelling the registration process.
If the registration fails, an error mes-
sage will appear; the procedure will
have to be repeated in this case.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 50

51
BLUE&ME
™
in conjunction with Instant Nav
The first time you register a mobile
phone the system will say “Welcome”
straight after connection. The system
will no longer give this welcome dur-
ing subsequent registration proce-
dures or when the same mobile phone
is connected.
The system will ask you if you want to
copy the phone list as soon as the
phone is registered. It is advisable to
copy the directory. To copy the di-
rectory, press OKor
ß. If you don’t
want to copy the directory, ESC. If
you do not copy the directory at this
point, you can copy it later on using
the SETTINGS, USER DATA, DIREC-
TORY MENU.
On some mobile phones the names in
the directory are not copied auto-
matically, but have to be transferred
by the user using the mobile phone
keypad. If the system asks you, carry
out this procedure following the spe-
cific instructions in your mobile phone
and press
ßwhen you have finished.
}Or, through voice commands:
Press
‘and say “Settings” and then,
at the end of the message from the
system say “Register user”.
The system will show the PIN code re-
quired for registering the mobile
phone on the panel display and it will
repeat it vocally.
For the next two stages, consult your
mobile phone manual for how to reg-
ister and connect devices with Blue-
tooth
®.
Search, on your mobile phone, for the
option that allows you to display de-
vices with Bluetooth
®in the operat-
ing range (this option may be called
Search, New Device, etc. on your mo-
bile phone). Select “Blue&Me” from
the devices enabled for Bluetooth
®
(the name that identifies the hands free
system for your car).When the mobile phone asks you, en-
ter the PIN shown in the display us-
ing your mobile phone keypad. If the
registration has been successful, the
system will say “Connection in
progress” and at the end will show the
number of the mobile phone regis-
tered on the display as confirmation.
It is important to wait for this confir-
mation message, if you press
ßor
ESCbefore this message appears you
risk cancelling the registration process.
If the registration fails, an error mes-
sage will appear; the procedure will
have to be repeated in this case.
The first time you register a mobile
phone the system will say “Welcome”
straight after connection. In subse-
quent registration procedures or
when connecting the same mobile
phone, the system will give this wel-
come message.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 51

52
BLUE&ME
™
in conjunction with Instant Nav
The system will ask you if you want to
copy the directory for the phone just
registered. It is advisable to copy the
directory onto the system. To copy
the directory, say “Yes”. If you don’t
want to copy the directory, say “No”.
On some mobile phones the names in
the directory are not copied auto-
matically, but have to be transferred
by the user using the mobile phone
keypad. If the hands free system asks
you, carry out this procedure follow-
ing the specific instructions in your
mobile phone and press
ßwhen you
have finished.Suggestions
To improve the voice recognition of the
names in your phone list and the accura-
cy of the pronounciation of the system, try
and enter the names in your directory and
save them using the following criteria:
– Avoid abbreviations.
– Write foreign names the way they are
pronounced, according to the system lan-
guage rules set on your car. For example,
it is advisable to enter “Jonathan” as “Giò-
natan”, to improve the recognition accu-
racy and produce the correct pronoun-
ciation by the system.
– When you add or alter names in the
directory, put in the appropriate accents
when required by the names so that they
are correctly pronounced and recognized
by the system. For example “Nicolo Reb-
ora” should be entered as “Nicolò Réb-
ora” to produce the correct pronouncia-
tion.
– When you add or alter names in the
directory, consider that some capital let-
ters on their own may look like Roman
numerals (e.g.: V may be read as fifth).
– When you are calling people using
voice recognition, omit abbreviated names
or middle initials. Notes
– Your mobile phone only has to be reg-
istered once.
– Up to five mobile phones can be reg-
istered on the system but can only used
one at a time.
– To connect a mobile phone that has
already been registered to the system the
Bluetooth
®setting on the mobile phone
you wish to connect must always be acti-
vated.
– Before transferring the names from
your mobile phone to the hands free sys-
tem, make sure that the name of each per-
son is unique and distinctively recogniz-
able so that the voice recognition system
works properly (you cannnot automati-
cally download the directory on all mobile
phones).
– The system will only copy valid names,
i.e. those that contain a name and at least
one telephone number.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 52

67
BLUE&ME
™
in conjunction with Instant Nav
Problem Probable Cause Possible Solution
The display shows: NO TELEPHONE
Or the system says
“No telephone connected”
The display shows:
TEL DISCONNECTED
The display shows: REG. FAILED
Or the system says
“Registration not successful.
Try again, please”
– Turn the mobile phone on
– Make sure that your phone has been
registered
– Make sure that the connection via
Bluetooth
®on your mobile phone
to the car’s hands free system has
been activated (Blue&Me™
identification)
– Make sure that the mobile phone you
have registered on the car’s hands free
system is within the system operating
range
– Turn the mobile phone on and off to
restore the connection with system
– Restore the system turning the
ignition key to the STOP position and
then turning it to th MAR position
– Check that the PIN number is correct
and try and enter it again
– Turn the mobile phone off and on and
then repeat the registration procedure
SETTING FUNCTIONS -
MOBILE PHONE REGISTRATION – The mobile phone registered is
switched off
– The mobile phone registered is not
within the system operating range
(it should be within about
10 m of the system)
– The connection via Bluetooth
®
technology between the system and
the mobile has been disabled on your
mobile phone (Blue&Me™
identification)
– If there has been an error in the
Bluetooth
® connection via for your
mobile phone
– During a phone conversation, the
mobile phone has gone outide the hands
free system operating range
– There has been an error during the
registration procedure
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 67