Downloaded from www.Manualslib.com manuals search engine 62A-22
AIR CONDITIONING
Refrigerant circuit pipe: Removal - Refitting
AIR CONDITIONING
62A
REFITTING
I - REFITTING PREPARATION OPERATION
a
If removing and refitting the refrigerant circuit pipe:
aCheck, and if necessary replace, the refrigerant cir-
cuit pipe seal.
aClean the surface and the seal of the pipe using EN-
GINE CLEANER (see Vehicle: Parts and con-
sumables for the repair) (04B, Consumables -
Products).aUse a compressed air gun to blow the surface and
the seal of the connecting pipe.
aLubricate the surface of the connecting pipe and the
seal with air conditioning oil (see 62A, Air condi-
tioning, Air conditioning: Parts and consum-
ables for the repair, page 62A-9) .
aRemove the blanking plugs.
II - REFITTING OPERATION
aProceed in the reverse order to removal.
aConsult the refrigerant and oil quantity values before
filling the circuit (see 62A, Air conditioning, Air
conditioning: Parts and consumables for the re-
pair, page 62A-9) .
aFill the refrigerant circuit using the refrigerant
charging station (see Refrigerant circuit: Drain-
ing - Filling) .
aCheck that the air conditioning system is operating
correctly (see Air conditioning: Check) .
aCheck for leaks (see Refrigerant circuit: Check) . WARNING
Do not remove the blanking plugs from each
component until the last moment.
Also, do not remove the components from their
packaging until they are to be fitted to the vehi-
cle.
143880
143882
