Downloaded from www.Manualslib.com manuals search engine 61A-10
HEATING
Rear air distribution duct: Removal - Refitting
REAR SEATS AIR DUCT
61A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove:
-the central console (see Centre console: Remov-
al - Refitting) (57A, Interior equipment),
-the front seats (see Front seat assembly: Ex-
ploded view) (75A, Front seat frames and mecha-
nisms),
-the floor carpet partially (see Floor trim assembly:
Exploded view) (71A, Body internal trim).
II - REMOVAL OPERATION
1 - Rear left-hand air distribution duct
aRemove the clip (1) using an unclipping tool.
aRemove the rear left-hand air distribution duct at (2)
.2 - Rear right-hand air distribution duct
aRemove the clip (3) using an unclipping tool.
aRemove the rear right-hand air distribution duct at
(4) .
REFITTING
REFITTING OPERATION
aProceed in the reverse order to removal.
144759
144760
Downloaded from www.Manualslib.com manuals search engine 61A-19
HEATING
Distribution unit: Removal - Refitting
61A
aSeparate the C-pillar air distribution ducts from the
distribution unit.
aPut a container in place to recover the coolant.
aRemove:
-the distribution unit,
-the distribution unit control panel.
aRemove from the distribution unit:
-the air recirculation control cable,
-the air distribution cable,
-the air mixing cable,
-the passenger compartment blower unit,
-the passenger compartment blower unit control
unit,
-the heater matrix pipes,
-the heater matrix,
-the evacuation ring.
aRemove the expansion valve.
aRemove the heating resistors.
REFITTING
I - REFITTING PREPARATION OPERATION
aCheck that the parts are in good condition and re-
place any defective parts, if necessary.
aAlways replace the seals between the heater matrix
pipes and the heater matrix.aRefit on the distribution unit:
-the heater matrix,
-the heater matrix pipes,
-the passenger compartment fan assembly control
unit,
-the passenger compartment blower unit,
-the air mixing cable,
-the air distribution cable,
-the air recirculation control cable,
-the trim kit,
-the evacuation ring,
-the control panel.
aRefit the heating resistors.
aRefit the expansion valve.
II - REFITTING OPERATION
aRefit the distribution unit.
aConnect the C-pillar air distribution ducts onto the
distribution unit.
aRefit:
-the dashboard cross member (see Dashboard
cross member: Removal - Refitting) (42A, Upper
front structure),
-the distribution unit bolts.
aConnect:
-the connector of the passenger compartment fan
assembly resistor unit,
-the passenger compartment fan assembly connec-
tor,
-the air conditioning control panel connector. REAR SEATS AIR DUCT
AIR CONDITIONING
DIESEL VEHICLE
WARNING
To avoid any leaks, check that the pipe surface is
sound before positioning the new seal. The sur-
face must be clean and scratch free.
DIESEL VEHICLE
AIR CONDITIONING
REAR SEATS AIR DUCT
