2009 CITROEN DS3 display

43
Instruments and controls

A few definitions…

Ran
ge
(miles or km
)

Thi
s indicates the distance
which can still be travelled with th
e fue
l
remaining in the tank in relation to the average fuel consum
ption over the last
few miles
(kilometres
) travelled.
Current
fuel consumption
(mp
g or l/100 km or km/l
)

This is the avera
ge fuel consumption
durin
g the last
few seconds.
Average fuelconsum
ption
(mp
g or l
/100 km or km
/l)
This is the average
fuel consumption since the
last trip computer zero reset.
Di
sta
nce
travelled

(miles or km
)
Thi
s indicates the distance travelled
s
ince t
he last tr
ip com
puter zero reset.
Average spee
d
(mph or km
/h)

Thi
s is the avera
ge spee
d
ca
lculate
d since t
he last tr
ip com
puter zero
reset
(ignition on
).
Distance remainin
g to
dest
ination
(miles or km)

This is the distance remaining to be travelled
to the final destination. It can be entered b
y
t
he use
r.
I
f the distance is not entered, dashes are displa
yed in place o
f the di
gits.
This value may vary following a change in the st
yle of drivin
g or the relief,
resultin
g in a si
gnificant chan
ge in the
current
fuel consum
ption.

If dashes are displa
yed continuousl
y
while drivin
g in place of the di
gits,
contact a
CITR
OË
N dealer.
This function is only displayed from 20 mph
(30 km/h
).
When the ran
ge falls below 20 miles
(30 km
),
dashes are displayed. After filling with at least 5 litres of fuel, the range is recalculated and is displayed when it exceeds 60 miles (100 km).

Monochrome screen A This displays the following information: - time
,
- date, - ambient temperature (this flashes if there is
a risk o
f ice
),
- status o
f the doors and boot,
- audio sources (radio, CD...), - trip computer (refer to the "Instruments and
Controls" section).
Warnin
g messa
ges
(e.g.: "Emission control
system fault
y") or information messa
ges
(e.g.:
"Boot open"
) ma
y appear temporaril
y. These
can
be c
leare
d by press
ing the "E
SC
" button.
Displays on the screen

From the control panel of
your Audio s
ystem,
you can: ) press t
he "MENU"
button to
gain access to
the general menu
,
) press t
he " " or
" " buttons to scro
ll
through the items on the screen,
) press t
he "M
ODE"
button to c
hange
the permanent application
(date, audio
source...
),
)
press t
he "  " or "  " buttons to c
hange a
setting value,
) press t
he "OK" button to con
firm,
or ) press t
he "E
SC
"button to a
bandon t
he
operation in progress.
Co
ntrols
)
Press t
he "MENU"
button to ga
in access
to the general menu , then press the
" "
or "

" buttons to scroll through the various
me
nus:
- radio-CD
,
- vehicle configuration,
- o
ptions,
-
display sett
ings,
-
languages,
- un
its.
)
Press the
"OK
"button to select the menu
required.
Ge
neral m
enu

Languages Once the "Lan
guages" menu has been
selected, you can change the language used
by the display (Français, Italiano, Nederlands,
Portugues, Portugues-Brasil, Deutsch, English, Espanol
).
Units
Once the "Units" menu has been selected,
you can change the units o
f the
following
parameters:
- temperature (°C or °F),
- fuel consumption (l/100 km, mpg or km/l).
Once the fuel consumption units have been set to mp
g, the information in the
instrument
pane
l screen on s
peed an
d
distance w
ill also
be in m
ph an
d miles.

For sa
fety reasons, con
figuration by the
driver of the multifunction screen mustonly be done when stationary.
Display settings Once the "Display settings" menu has been selected, you can gain access to the following settings:
- year,- month
,
- day, - hour
,
- minutes,- 12
or 24 h
our m
ode
.
)
Once you have selected a setting, press the "  " or " 
" buttons to change its value.
)
Press the "
 " or " " buttons to switch
respect
ively to t
he prev
ious or next sett
ing.
)
Press the
"OK" button to save t
he c
hange
and return to the normal display or press
the
"ESC" button to cancel.

51
Multifuntion screens
"P
erso
nalisat
ion-
Configuration" menu

Once this menu has been selected, you can gain access to the following functions: - define the vehicle parameters, - display configuration, - choice of language. 
'H
¿QHWKHYHKLFOHSDUDPHWHUV

Once this menu has been selected, you can activate or deactivate the following equipment: - wiper linked to reverse gear (refer to the
"Visibilit
y" section
),
- "guide-me-home" lighting - parking assistance
(refer to the "Driving"
section).
Example: setting of the duration of the "guide-
me-home" lighting ) Press the "
"
or "" buttons
, then the
"
OK" button to select the menu required.
)
Press the "
" or "" buttons, t
hen t
he
"
OK"
button to select the "
Guide-me-home
headlamps" line.
)
Press the "
" or
" " buttons to set t
he
value required
(15, 30 or 60 seconds
), then
press the
"OK"button to con
firm.
) Press t
he "  " or
"  " buttons, t
hen t
he
"OK"button to se
lect t
he "OK"
box an
d
confirm or press the
"ESC" button to
cancel.

53
Multifuntion screens

16/9 colour screen (MyWay) It displays the following information automatically and directly: - t
ime,
- date,
- altitude, - ambient temperature (the value displayed
flashes if there is a risk of ice),
- check of the doors
,
- warning and vehicle function status
messages, displayed temporarily,
- audio functions
,
- satellite navigation system information.
Displa
ys on the screen
MyWa
y To select one of the applications, at the
control panel: ) press t
he dedicate
d "RADI
O" , "M
US
IC",
"NAV"
, "TRAFFI
C", "SETUP"
or
"PHONE"

button
for access to the
correspon
ding menu,
) turn the dial to change the selection,
) press the dial to confirm the selection,
or )
press the
"ESC
"button to aba
ndon th
e
current operation and return to the previous display.
Controls

For fur ther information on these applications,
refer to the "Audio and Telematics" sec
tion or
to the speci
fic user
guide
given to
you with the
other owner
's documents.

Digital air conditioning The air conditioning can only operate when the engine is running. Automatic operation1. Automatic "comfort"
programme
Press t
he "A
UTO"button.
The
"AU TO "
symbol is displayed.
We recommend that you use this mode. It provides optimised
automatic control of all of the followin
g
functions: passen
ger compartment
tem
perature, air
flow, air distribution and air
intake, in accordance with the comfort value that you
have c
hosen.
This system is designed to operate e
ffectively
in all seasons
, with the windows closed.
For
your comfort, when the en
gine is
switched o
ff, the settin
gs are retained
until the en
gine
is sw
itched on a
gain.
To prevent too
great a distribution o
f
cold air w
hen t
he en
gine
is co
ld, the a
ir
flow will only reach its optimum level gradually.

2. Temperature adjustment The va
lue
indicate
d on t
he display correspon
ds
to a level o
f com
fort and not to a tem
perature in
degrees
Celsius or Fahrenheit.

On enterin
g the vehicle, if the interio
r
is ver
y co
ld or
hot, t
here
is no nee
d to
change the va
lue
displayed in or
der
to reach the re
quired level o
f com
fort.
The s
ystem corrects t
he temperature
difference automatically and as quickly
as possible.

Pr
ess
the "" and "" buttons to
chan
ge this value. A settin
g around
t
he value
21
ena
bles o
ptimum
com
fort to be obtained. However,
depen
ding on
your requ
irements, a
setting between 18 and 24 is usual.
 $XWRPDWLFYLVLELOLW
\
pro
gramme The automatic com
fort pro
gramme
may not be su
fficient
for rapid
demistin
g or de
frostin
g of the
windscreen an
d side w
indows
(humidity, several passengers, ice, etc.
).
In this case, select the automatic visibility
programme. The button
3
indicator lamp comes on.
The system automatically controls the air
conditionin
g and the flow of air and provides
o
ptimum a
ir distribution to t
he w
indscreen an
d
side
windows. It deac
tivates air recircula
tion 5.
To ex
it this pro
gramme, press
button
3again
or "AU TO "
, the indicator lamp on the button is"
switched o
ff and
"AUTO"is displaye
d.

67
Comfort
It is possible to adjust one or more functions manually while leaving the other functions in automatic mode.
The "AU TO "
symbol switches off.
To return to automatic mode, press the
"AU TO "
button.
0
DQXD
ORYHUUL
GH

4. Air conditionin
g on/o
ff

For maximum cooling or heating o
f the
cabin, it is possible to go beyond the minimum
14 or maximum
28 values.
) Press the blue button
2 until
"LO"
is displayed or the red button
2until
"HI"

is displa
yed.
Pr
ess
this button to switch off the air
conditioning.

Stopping the air conditioning may cause
some problems
(humidity, misting
).

Automatic operation of the air conditioning is resumed when the button is pressed again. The
symbol "A /C
"is displayed.
5. Air in
take/Air r
ec
ircu
lation
Press
thi
s button for recirculation of
t
he inter
ior a
ir. The a
ir rec
ircu
lation
sym
bol 5 is displaye
d.

Air rec
ircu
lation ena
bles t
he
passenger compartment to be isolated from
exterior odou
rs and smoke.
Press this button again or press the
"AUTO"
button to resume automatic mana
gement of the
intake o
f air. The air recirculation s
ymbol
5is
switched off.
Avoid prolonged recirculation o
f interior
air
(risk o
f condensation or deterioration
of the air quality).
Switching to manual mode may not besuitable
(temperature, humidity, odour,
condensation) and does not provide optimum comfort.

97
Visibility

Model without AUTO lighting
Model with AUTO lighting
M
anua
l co
ntrols
The ligh
ting comman
ds are
issue
d direct
ly by
the driver by means o
f the ring
A
and the stalk A
B.
Automat
ic lighting.
B. Stalk for switchin
g the headlamp beam:
pull the sta
lk to sw
itch between
dipp
ed an
d
ma
in beam
headlam
ps.
In the lam
ps o
ff and sidelam
ps modes, the
driver can sw
itch on t
he ma
in beam
headlam
ps
temporarily ("headlamp flash") by maintaining apull on the stalk.A. Main lighting mode selection ring: turn itto position the s
ymbol required facin
g the
mark.

Lam
ps o
ff.

Sidelamps only.

Dipped headlamps or main beam
headlamps.
Displays
Lightin
g of the correspondin
g indicator lamp on
the instrument panel con
firms the switching on
of the lighting selected.

The instrument panel has permanent back-
lighting. Illumination of the instrument panel is
therefore not linked to the exterior lighting.