2009 CITROEN DS3 display

Monitoring On switchin
g on, the dial needles
go to the
extent of their travel then return to 0. A.
With the i
gnition on, the
fuel
gauge bars
for
the
fuel remainin
g should li
ght up.
B.
With the en
gine runn
ing, the assoc
iate
d
low level warning lamp should switch o
ff.
C. With the ignition on, the oil level indicator
should display
"OIL OK
" for a few
seco
nds.
If the levels are not correct, top up the level which is low.
Instrument panel
24
1.
With the i
gnition on, the oran
ge and red
warnin
g lamps come on.
2.
With the en
gine runn
ing, these warn
ing
lam
ps should switch o
ff.
I
f a warnin
g lamp remains on, re
fer to the pa
ge
concerne
d.

Warnin
g lamps
26
Lightin
g of the indicator lamp indicates
deactivation of the ESP/ASR s
ystem.
Switch panel
131

Petrol - Diesel instrument panels, manual or automatic gearbox Provided with permanent back-lighting, the instrument panel groups together the vehicle's dials and indicator and warning lamps.1.
Rev counter.
Indicates the speed of rotation of the
engine
(x 1 000 rpm
).
2.
Vehicle s
peed.
Indicates the current speed o
f the movin
g
vehicle
(km
/h or mph
).
3.
Engine coolant
temperature
.
Indicates the temperature of the enginecoolant liquid (° Celsius).
Dials
7.
Lighting rheostat button.

Adjusts the level of the instrument and controls
illumination an
d the inter
ior moo
d ligh
ting.
4.
Display screen
.
5. Fuel level
.
Indicates the quantit
y of fuel remainin
g in
the
tank.
6.
Display mana
gement
button

Alternates
display between range an
d trip
mileage recorder.
Servicing information.
Resets the selected function to zero (trip
distance recorder or service indicator).
For more information
, refer to the
para
grap
h relating to t
he button or
function and its associated displa
y.

System which informs the driver when thenext ser vice is due, in accordance with the manufacturer's servicing schedule.The point at w
hich the ser v
ice
is due
is
calculated from the last indicator zero reset. It is determined by two parameters: - the distance travelled, - the time elapsed since the last ser vice. Service indicator

More than 600 miles
(1 000 km
)
remain
be
fore the next se
rvi
ce
is due


For 5 seconds after the i
gnition is switched on,
the spanner s
ymbolising the ser v
ice operat
ions
comes on.
The distance recor
der display line
indicates the distance remainin
g be
fore the
next serv
ice
is due.
Example:

4 800 km remain be
fore the next
service is due.
For 5 seconds after the ignition is switched on, the displa
y indicates:
Less than 600 miles
(1 000 km
)
remain
be
fore the next se
rvi
ce
is due

Exam
ple: 400 miles
(900 km
) remain before
t
he next service is due
.
For 5 seconds a
fter the i
gnition is switched on,
t
he display indicates:
5 seconds after the ignition is switched on,
th
e distance reco
rder resu
mes its normal
o
perat
ion.
The s
panner rema
ins on
to
indica
te that a service must be carried
out
soon
.
5 seconds after the ignition is switched on, the
spanner is switched off
; the distance recorder f
resumes its normal operation. The displa
y then
indicates the total and trip distances.

37
Instruments and controls
5 seconds a
fter the i
gnition is switched on,
t
he distance reco
rder resu
mes its normal
operation.
The spanner rema
ins
lit.

The distance remaining may be weighted b
y the time factor, dependin
g
on the driver
's driving habits.

There
fore, the spanner ma
y also come
on if you have exceeded the two
year
serv
ice
interva
l.
Service indicator zero reset After each service, the service indicator mustbe reset to zero.The procedure
for resetting to zero is as
follows:
) switch off the ignition, ) press and hold the trip distance recorder zero reset button
,
) switch on the i
gnition; the distance recorder
display begins a count
down,
)
w
hen t
he display indicates
"=0" , re
lease
the button; t
he s
panner
disappears.

Followin
g this operation, i
f you wish to
disconnect t
he battery,
lock the ve
hicle
and wait at least
five minutes
for the
zero reset to be taken into account.

Retrieving the service information You can access the ser vice in
formation at an
y
t
ime. ) Press t
he tr
ip distance recor
der zero reset
button.
The ser vice information is displayed for a few seconds, then disappears.
Service overdue
For 5 seconds after the ignition is switched on, the spanner flashes
to indicate that
the service must be carried out as soon as possible.Example:
the ser vice is overdue b
y 300
km.

For 5 seconds a
fter the i
gnition is switched on,
t
he display indicates:

Instruments and controls
System which measures the total distancetravelled by the vehicle during its life. The total and trip distances are displayed for thirt
y seconds when the i
gnition is switched o
ff,
when the driver's door is opened and when the vehicle is locked or unlocked. Tota
l dista
nce
reco
rde
r
System which measures a distance travelled
durin
g a da
y or other period until it is reset to
zero by the driver.) With the ignition on, press t
he button unt
il
zeros appear.
Trip
di
stance recor
der
System for manual adjustment of the brightnessof th
e instruments and controls in r
elation to the
exter
ior brigh
tness.
Li
ghting r
heostat
Activat
ion
Wh
en t
he ligh
ting is on:
)
press t
he button to c
hange the brigh
tness
o
f the instruments and controls,
)
when the level o
f brightness required is
reached
, release the button.
Deact
ivation
When the lighting is o
ff, or in day mode on
vehicles fitted with LED lamps, pressing the
button does not have any effect.

Black panel System allowing certain displays to be switched off for ni
ght drivin
g.
The instrument pane
l rema
ins
lit with on
ly the
vehicle speed and cruise control or speed limiter in
formation, i
f in use.
If there is an alert or a change in a function or to a sett
ing, t
he black pane
l mo
de is
interrupted.

Activation)
With the li
ghtin
g on, press the le
ft hand
button o
f the instrument
panel several
times to pro
gress
ively reduce t
he
dashboar
d lighting
leve
l.
) Press the button again to reduce thelighting to the minimum level and switch of
f
the ambience lighting.
) Press the button a
gain to activate the black
panel.

41
Instruments and controls

Trip computer
System which provides current information concerning the trip travelled (range, fuel consumption...).
Monochrome screen A
Data displays )
Press the button, located at the end o
f the
w
iper sta
lk, to display the various items of
trip computer data in succession.
Zero reset )
Pr
ess
the control for m
ore than
two secon
ds to reset to zero t
he distance
travelled, the avera
ge fuel consumption
and the average spee
d.
The trip computer provides the
following
information:
-
range
,
- current fuel consumption,
- distance travelled
,
- average
fuel consumption,
- avera
ge speed.
)
The next press then returns
you to the
normal display.

Trip computer System which provides current information concerning the route travelled (range, consumption…). M
onoc
hr
om
e sc
ree
n
C
Data displays )
Press the button, located at the end o
f
the
wiper stalk

, to display the various trip
computer tabs in succession:
Trip zero reset
)
Wh
en t
he route requ
ired is displayed, press
the control
for more than two seconds.
Trips "1" an
d "2" are
independent
but t
heir use
is ident
ical.
Tr i p "
1" permits, for example, daily calculations,
and trip "
2"
monthly calculations.
- the current in
formation tab
with: