2009 CHRYSLER SEBRING CONVERTIBLE change time

[x] Cancel search: change time

Page 229 of 475

CHRYSLER SEBRING CONVERTIBLE 2009 3.G Owners Manual the current selection. Pressing and holding the SEEK
button will allow faster scrolling through the tracks in
CD, MP3 modes.
TIME Button
Press this button to change the display from a large CD
playing

Page 232 of 475

CHRYSLER SEBRING CONVERTIBLE 2009 3.G Owners Manual Playback of MP3 Files
When a medium containing MP3 data is loaded, the
radio checks all files on the medium. If the medium
contains a lot of folders or files, the radio will take more
time to start pl

Page 235 of 475

CHRYSLER SEBRING CONVERTIBLE 2009 3.G Owners Manual 3. After adjusting the hours, press the right side Tune/
Scroll control knob to set the minutes. The minutes will
begin to blink.
4. Adjust the minutes using the right side Tune/Scroll
control knob. P

Page 238 of 475

CHRYSLER SEBRING CONVERTIBLE 2009 3.G Owners Manual SETUP Button
Pressing the SETUP button allows you to select between
the following items:
•Set Clock— Pressing the SELECT button will allow
you to set the clock. Turn the Tune/Scroll control knob
t

Page 240 of 475

CHRYSLER SEBRING CONVERTIBLE 2009 3.G Owners Manual CAUTION! (Continued)
•RES is a single CD player. Do not attempt to insert
a second CD if one is already loaded.
•Dual-media disc types (one side is a DVD, the
other side is a CD) should not be use

Page 241 of 475

CHRYSLER SEBRING CONVERTIBLE 2009 3.G Owners Manual AM/FM Button
Press the button to select either AM or FM mode.
SET/RND Button (Random Play Button)
Press this button while the CD is playing to activate
Random Play. This feature plays the selections o

Page 244 of 475

CHRYSLER SEBRING CONVERTIBLE 2009 3.G Owners Manual To increase the speed of disc loading, it is recommended
to use CD-R media and single-session discs. To create a
single-session disc, enable the “Disc at Once” option
before writing to the disc.
L

Page 245 of 475

CHRYSLER SEBRING CONVERTIBLE 2009 3.G Owners Manual NOTE:The AUX device must be turned on and the
device’s volume set to proper level. If the AUX audio is
not loud enough, turn the device’s volume up. If the AUX
audio sounds distorted, turn the dev
Page:   < prev 1-10 9-16 17-24 25-32 33-40 next >