2009 CHEVROLET UPLANDER door lock

[x] Cancel search: door lock

Page 159 of 464

CHEVROLET UPLANDER 2009 1.G Owners Manual Convenience Center
{CAUTION:
If any removable convenience item is not secured
properly, it can move around in a collision or
sudden stop. People in the vehicle could be
injured. Be sure to secure any

Page 173 of 464

CHEVROLET UPLANDER 2009 1.G Owners Manual Exterior Lamps
The exterior lamps control is located on the instrument
panel to the left of the steering wheel.
9(Off):Turns all the lamps off. This is a momentary
control that springs back to AUTO wh

Page 175 of 464

CHEVROLET UPLANDER 2009 1.G Owners Manual To idle the vehicle with the DRL and automatic
headlamps off, toggle the exterior lamp control
to off after starting the vehicle.
The regular headlamp system should be turned on
when needed.
Instrumen

Page 176 of 464

CHEVROLET UPLANDER 2009 1.G Owners Manual Dome Lamp
The dome lamp is located in the headliner and has two
buttons to manually turn it on or off. The dome lamp
comes on each time a door is opened, unless the interior
lamps override feature is

Page 177 of 464

CHEVROLET UPLANDER 2009 1.G Owners Manual Exit Lighting
The interior lights come on for about 25 seconds
whenever the key is removed from the ignition. If the
ignition key is turned to ON/RUN or ACC/ACCESSORY,
the lights fade out. The lights

Page 179 of 464

CHEVROLET UPLANDER 2009 1.G Owners Manual Battery Run-Down Protection
This vehicle has a feature to help prevent the battery
from being drained. The interior lamps automatically
turn off after 10 minutes while the ignition is in the
LOCK/OFF

Page 214 of 464

CHEVROLET UPLANDER 2009 1.G Owners Manual DELAYED LOCKING
This message displays to inform the driver that even
though a door lock switch or the lock button on the
Remote Keyless Entry (RKE) transmitter has been
pressed, that actual locking of

Page 216 of 464

CHEVROLET UPLANDER 2009 1.G Owners Manual HOOD AJAR
If your vehicle has the remote start feature, this
message displays when the hood is not closed properly.
Make sure that the hood is closed completely. See
Hood Release on page 5-13.
This me