2009 CHEVROLET COBALT turn signal bulb

[x] Cancel search: turn signal bulb

Page 125 of 402

CHEVROLET COBALT 2009 1.G Owners Manual Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes the following:
GTurn and Lane-Change Signals. SeeTurn and
Lane-Change Signals on page 3-7.
53Headlamp High/

Page 235 of 402

CHEVROLET COBALT 2009 1.G Owners Manual Turn Signals When Towing a Trailer
When you tow a trailer, your vehicle may need a
different turn signal �asher and/or extra wiring. Check
with your dealer/retailer. The arrows on your instrument
pane

Page 239 of 402

CHEVROLET COBALT 2009 1.G Owners Manual Service............................................................5-3
Accessories and Modi�cations..........................5-3
California Proposition 65 Warning.....................5-4
California Pe

Page 280 of 402

CHEVROLET COBALT 2009 1.G Owners Manual Bulb Replacement
For the proper type of replacement bulbs,
seeReplacement Bulbs on page 5-47.
For any bulb changing procedure not listed in
this section, contact your dealer/retailer.
Halogen Bulbs
{C

Page 281 of 402

CHEVROLET COBALT 2009 1.G Owners Manual To replace one of these bulbs:
1. Open the hood. SeeHood Release on page 5-11
for more information.
2. Remove the two hex bolts from the headlamp
assembly.
3. Remove the two plastic fasteners from the

Page 282 of 402

CHEVROLET COBALT 2009 1.G Owners Manual Center High-Mounted Stoplamp
(CHMSL)
To replace a CHMSL bulb:
1. Open the trunk. SeeTrunk on page 2-13for
more information.
2. Locate the CHMSL bulb assembly in the trunk lid.
3. Press the plastic tab

Page 283 of 402

CHEVROLET COBALT 2009 1.G Owners Manual 3. Disconnect the wiring harness by lifting up on the
tab to release and pull it straight out.
4. Remove the taillamp bulb socket from the assembly
by turning it counterclockwise.
5. Pull the old bulb

Page 285 of 402

CHEVROLET COBALT 2009 1.G Owners Manual License Plate Lamp
To replace one of these bulbs:
1. Remove the two screws holding each of the license
plate lamps.
2. Turn and pull the license plate lamp toward you
through the opening.
3. Turn the
Page:   1-8 9-16 next >