
- Lack of proper  maintenance  as wel l as improper  use  of  the 
vehic le wi ll  impair  the  function  of  the  emission  control  system 
and  could  lead  to  damage. 
'£> For the  sake  of the  environm ent 
Even when  the  Emission  Control  System  is operating  properly,  the 
exhaust  gas  can  have  a su lfur -like  exhaust  gas  sme ll  under  some 
operating  states.  This  depends  on  the  sulfur  content  of  the  fuel 
being  used.  Using  a different  brand  of  fue l may  help,  or  filling  the 
tank  with  lead-free  super  grade  gasoline. • 
Avoid  damaging  the  vehicle 
When  you  are  driving  on  poor  roads,  or  over  curbs,  steep  ramps, 
etc.,  make  certain  that  low- lying  parts  such  as spoilers  and  exhaust 
system  parts  do  not  bottom  out  and  get  damaged. 
This  is especially  true for  vehicles  with  low -slung  chassis  (sports 
chassis)*  and  fully  loaded  vehicles. 
a 
Operate  your  vehicle  economically 
and  minimize  pollution 
General 
Your personal  style  of driving  will  determine  the  economy 
of  your  vehicle,  as  well  as exhaust  and  noise  levels. 
Fuel  economy,  environmental  impact,  and  wear  on  your  engine, 
brakes  and  tires  largely  depend  on  three  factors: 
•  your  personal  driving  style 
•  operating  cond itions 
•  technica l limitat ions 
Controls  and  equip
ment  Safety  first  Vehicle  operation 
Driving 
and  environm ent 
If you  anticipate  what  you  need  to  do  next  and  drive  economica lly, 
you  can  easily  cut  your  fuel  consumpt ion  by  10 -15 percent . This 
section  wil l give  you  some  tips  on  how  you  can  help  the environ
ment  and  your  pocketbook. 
[  i ] Tips 
The  consumption  est imates  as published  by  ENV IRONMENTAL 
PROTECTION AGENCY (EPA) and  Transport  Canada  may  not  corre 
spond  to  your  actua l consumption  on  the  road,  which  will  vary 
depending  upon  vehicle  load  and  speed,  road  and  weather  condi
tions,  trip  length,  etc. • 
Drive  smoothly  and  keep  a  lookout  ahead 
Vehicles  use  the  most  fuel  when  they  ore  accelerating . 
-Avoid  unnecessary  accelerating  and  brak ing. 
Vehicles  use  the  most  fue l when  they  are  accelerating . If  you  antici
pate  what  is going  to  happen  next, you  wi ll need  to  brake  less  and, 
thus,  acce lerate  less.  Let  the  vehicle  coast  whenever  possib le - for 
examp le  when  you  see  that  the  next  traffic  light  is  red. • 
Avoid  full  throttle 
Driving  at  moderate  speeds  saves  fuel  and  improves  your 
mileage. 
-Try  and  keep  well  below  your  car's  maximum  speed. 
Acce lerating  gently  reduces  fuel consumption,  engine wear,  and 
does  not  disturb  the  environment. 
Fue l consumption,  exhaust  emissions  and  engine  noise  increase 
disproportionately  at  high  speeds . If you  drive  at  approximately 
three  quarters  of  top  speed,  fuel  consumption  wil l be  reduced  by  • 
Vehicle  care  Do-it-yourself  service  Technical  data  

-Tires  and  wheels 
P'U:1-------------------
warmed  up  than  when  it  is  "cold."  It  is the  inflation  pressure  in a 
"cold"  tire  that  counts.  Therefore,  you  should  never  let air out  of  a 
warm  tire  to  match  "cold  tire  inflation  pressure"  recommendations . 
The  tires  would  then be underinflated  and  could  fail suddenly. 
Maintaining  proper  tire  pressure  is one  of  the  most  important 
things  you  can  do  to  help  avoid  sudden  tire  failure.  Underinflated 
tires  are  a  major  cause  of  sudden  tire  failure.  Keeping  tires  at  the 
right  pressure  is also  important  for  safe  and  responsive vehicle 
handling,  traction, braking and load  carrying. 
Tire  pressures are 
particularly  important  when  the  vehicle  is being  driven  at  higher 
speeds,  and  then  especially  when  heavily  loaded  even within  the 
permissible  load-carrying  capacities  approved  for  your  vehicle . 
The recommended  tire  pressures for  your  Audi  depend  on the  kind 
of  tires  on  your  vehicle  and  the  number  of  passengers  and/or 
amount  of  luggage  you  will  be transporting. 
On  USA  vehicles,  the  tire  pressure  label  is  located  on the driver's 
side  B-pillar . On Canada  vehicles,  the  tire  pressure  label  is  located 
either  on  the driver's  side B-pillar  or  inside  the  fuel  filler  flap. The tire 
pressure  label  lists  the  recommended  cold  tire  inflation  pressures 
for  the  vehicle  at  its  maximum  capacity  weight  and  tires  that were 
on  your  vehicle  at  the  time  it  was  manufactured. 
If you wish  to  improve  comfort  when  operating  the  vehicle  at 
normal  load (up to  2  occupants),  you  can  adjust  tire  pressures to 
-
those  specified  for normal  vehicle  load. Before operating  the  vehicle 
at  maximum  load,  you  must  increase the  tire  pressures to  those 
specified  for  maximum  vehicle  load 
=> & . 
If your  vehicle  is equipped  with  a tire  pressure  monitoring  system *, 
bear  in mind  that  the  system  can  only  monitor the tire  pressures  you 
have  stored.  The  system  does  not  recognize  the  load condition  of 
your  vehicle. 
The  effectiveness  of  the  tire  pressure  monitoring  system  will  be 
impaired  if you  store  normal  load  pressures  but then  operate  the 
vehicle  at  its  maximum  load=>&. 
See  the illustration => 
page 271, fig.  207 for  the  location of  the label 
either  on  driver's  side  B-pillar  or  inside the fuel  filler  flap  (color  of 
the  actual  label  and  exact  location on  the  vehicle  will  vary  slightly). 
Note  that  the  following table is accurate  at  the  time of  going  to 
press  and  is subject  to  change.  In the  event  of  discrepancies,  the  tire 
pressure  label  (either on  driver's  side B-pillar  or  inside  the  fuel  filler 
flap)  always  takes precedence . 
The  table  below  lists  the  recommended cold  tire  inflation  pressures 
for  the  Audi  model covered  by  your Owner's  Literature  at the 
vehicle's  capacity  weight  and  the  tire  sizes  installed  on  the  respec
tive  models  as  original equipment,  or as a  factory  option. 
Engine 
(displace
ment  in  liter)  Tire  designation 
Tire  pressure  front  Tire  pressure  rear 
4-cylinder 
2.0  215/55  R16 93H All  Season 
235/45  R17 94H  All Season 
235/45  R17 94Y High  Performance 
235/40  R18 95Y XL High  Performance 
normal  load 
condition  (up  to 
2 occupants) 
PSI 
33 
33 
30 
36 
kPA 
230 
230 
210 
250 
full  load 
condition 
PSI 
35 
35  33 
42 
II kPA 
240 
240 
230 
290 
normal  load 
condition  (up 
to 2 occupants) 
PSI 
30 
30 
30 
36 
JI kPA 
210 
210 
210 
250 
11 full  load 
condition 
PSI 
38 
38 
33 
42 
JI kPA 
260 
260 
230 
290 
I  

Tires  and  wheels -
----------------
• 
Engine  Tire designation  Tire  pressure  front  Tire  pressure  rear 
(displace- normal  load normal  load 
ment  in  full  load 
full  load 
liter )  c
ondit ion  (up  to 
condition  c
ondition  (up 
condition 
2  occupants )  to  2  occupants) 
PSI  kPA  PSI  kPA  PSI  kPA  PSI  kPA 
6 -cylinder  215 /55  R16 93H  All Season 35  240 
38 260 
30 2
10 
38  260 
3.2 
235/45  R17 94H  All Season 35  2
4 0 
38  260  30  2
10 
38  260 
235/45  R17 94V  High  Performance 30  2 10  3 3 230  30  2 10  33  230 
235 /40  R18 95V  XL High  Performance 41 280 46 320 41 280 4 6 320 
XL= reinforced  or  extra  load  tire.  It  may  also  appear  as x i,  EXTRA LOAD , or RF on  the  tire  sidewa ll. 
The  correct  tire  pressure  for  the 
spare  wheel is  located  on  a  label 
either  on  the  dr iver's  side  B-pilla r or  i nside  the  fuel  filler  flap. 
Because  technical  changes  may  be  made  to  vehicle  equipment 
dur ing  the  mode l year,  a lways  co mpare  the  tire  size  designatio n on 
the  tire  pressure  label  on  your  vehicle  with  the  tires  on your  vehicle . 
Make  sure  t hat  the  tire  s ize  informa tion  o n the vehi cle labe l is the 
same  as the  size  of  the  tires on  the  vehicle . This  is especially  impor 
t a nt  if th e ve hicle  belo ngs  to  someone  else  or you  bough t  the 
vehic le with  different  rims/tires  or  you  bought  the  vehicle  as a previ 
ously  owned  vehicle. 
Re member,  your  safety  and  that  of  your  passeng ers a ls o  depends 
on  making  sure  that  load  limits  are  not  exceeded.  Vehicle  load 
inc lude s every body  and  everyt hin g i n and  o n the  vehic le . These  load 
limits  are  techn ically  referred  to  as the  vehicle's  Gross  Vehic le 
Weight  Ra tin g ("GVWR") . The Gross  Axle  Weig ht  Ra ting  ("GAWR")  is 
the  maximum  load  that  can  be  applied  at  each  of  the  veh icle's  two 
ax les . The  Gross  Vehic le  W eight  Rating  and  the  Gross  Ax le Weight 
Rating  are  listed  on  the  safety  compliance  sticker  label  located 
either  on  the  driver's  s ide  8 -pillar  or  on  the  inside  of  the  fuel  fi ller 
fl ap.  T he ti re pressure  labe l on  your  Aud i  lists  the  max imum 
combined  weight  of  a ll of the  occupants  and  luggage  or other  cargo  that  the  vehicle  can  car
ry. Fo r the  l ocat io n  of  the tire  pressure  la bel 
=> page  271, fig.  207. 
LJ}. WARNING 
Overload ing a vehicle  can cause  loss of vehi cle  cont rol , a crash or 
other  ac cident , serious  per sonal  injury , and  even  death . 
•  Carrying  more  weight  than  your vehicle  wa s designed  to  carry 
will  prevent  the  vehicle  from  handling  properly  and  increase  the 
risk  of  a loss of vehicle  control . 
•  The  brakes  on  a vehicle  that  has been  overloaded  may  not  be 
able  to  stop  the  vehi cle within  a  safe  dist ance. 
•  Tires  on  a vehicle  that  has been  overloaded  can fail  suddenly 
cau sing  lo ss of  control  and  a crash . 
•  Always  make  sure that  the  total  load  being  transported  -
including  the  weight  of  a trailer  h itch  and the  tongue  weight  of  a 
loaded  trailer  -does  not  make  the  vehicle  heavier  than  the 
vehi cle 's Gross Vehicle Weight  Rating . .,,_ 
Vehic le  care  

General  information -________________ ,,.. 
vehicle identification  number  of your  vehicle  (perforation)  as well  as 
t he Gross  Vehicle  Weight  Rating  (GVWR) and  the Gross  Axle  Weight 
Rating  (GAWR). 
Th e high  voltage  warning  label 
is  located  on  the  lock  carrier . 
The  s pa rk  ign iti on  syst em  compl ies  with  th e Canadi an 
s tandard  ICES-002 . • 
Weights 
G ross  V ehicl e W eight  R atin g 
The Gross Vehic le Weight  Rating  (GVWR), and  the  Gross Axle Weigh t 
Rating  (GAWR) for  front  and  rear  are  listed  on  a sticker  on  the  left 
door  ja mb. 
The  Gross  Vehicle  Weight  Rating  includes  the  weight  of  the  basic 
vehicle  pl us fu ll f uel tank,  oil  and  coolant,  plus  maximum  load, 
wh ic h  inc ludes  passenger  weight  (150  lbs/68  kg  per  designated 
seating  position)  and  luggage  weight. 
Gross  Axle  We ight  Rating 
The  Gross  Axle  Weight  Rating  is  the  maximum  load  that  can  be 
app lied  at  each  axle  of  the  vehicle~ &. 
Vehicle  capacity  weight 
The vehicle  capacity  weigh t (max.  load)  is  listed  ei ther  on  the 
driver's  side  B -p illar  or  inside  the  fuel  filler  flap . 
& WARNING 
• The actual  Gro ss Axle Weight  Rating  at  the  front  and  rear axles 
s h ould not e xceed the  permi ssible weight s, and their  comb in ation 
mu st  not  exceed  the  Gro ss Vehicle  Wei ght  Rating. 
Controls . and  equip
ment .  Safety  first  Vehicle  operation 
& W
ARNING  (conti nued ) 
•  Exceeding  pe rmi ssible  weight  ratings  can  result  in vehicle 
d am age , ac ciden ts  a nd  per sonal  inj ury . 
0 Note 
•  The vehicle  capacity  weight  figures  apply  when  the  load  is 
distributed  even ly  in  the  vehicle  (passengers  and  luggage) . When 
transporting  a  heavy  load  in  the  luggage  compartment,  carry  the 
load  as  near  to  the  rear  axle  as possib le so  that  the  vehicle 's 
handl ing  is  not  impai red. 
•  Do  not  exceed  the  maximum  permiss ib le axle  loads  or  the 
maximum  gross  vehicle  weight . Always  remember  tha t the  veh ic le's 
handling  wil l be  affected  by the  extra  load.  Therefore,  adjust  your 
speed  according ly . 
•  Always  observe  local  regulations. • 
Dimensions 
The  specifications  refer  to  the  basic  model.  Differences  may  occur 
depending  on the  mode l type  and  op tions  o rdered,  for example,  tire 
sizes. 
0 Note 
When  driving  up  steep  ramps,  on  rough  roads,  over  curbs , etc . it  is 
important  to  remember  that  some  parts  of  your  vehic le, such  as 
spoilers  or  exhaust  system  components,  may  be  close  to  the 
g round.  Be ca reful  not  to  damage  them. • 
Vehicle  care  Do-it-yourself  service  Tec hn ica l da ta