2009 AUDI S3 oil reset

Driver informati on displ ay
Service Interval Display
The Service Interval Display is a reminder of the next
service due.
F ig . 9 Sect io n of
i n strum en t cl uster:
Se rv ice in terva l d isplay
The service interval display determines when a service procedure is
needed for your vehicle.
Di sp lay re main ing di sta nce/ tim e
By briefly pulling the knob,@~
page 8, fig. 2, the distance/time
remaining to the next service date is displayed with the ignition on.
The remaining distance/time is not displayed within the first 500 km of a new vehicle or after a service . It is updated every 500 km after
that.
A utom ati c re maini ng d ista nce/ tim e dis play
It operates in two stages:
• Service reminder: At a certa in distance before the next service
event is reached, the message
S ervice in 12 30 mi (2000 km ) 3 0 d ays
or Oil ch ange in 1 230 mi (2000 km ) 15 0 days is displayed when you
switch the ignition on.
• Service event : If the date for service is reached, the message
S ervic e due! appears and the wrench indicator light il luminates. It
is accompanied by an audib le signal. The type of service event is
a lso displayed. T
o r eset the disp lay
The dealership performing the service resets the display when the service has been completed. The display is resets as follows :
• Switch the ignition on .
• Pull the knob@)~
page 8, fig. 2, this message appears: S erv ice
du e!
• Pull the knob until the display Oil chang e in ----- mi (km )--- days
appears in the display . If the reset button is not pulled within 5
seconds, the disp lay reset mode c loses.
[ i ] Tip s
• If a malfunction is present (red symboll, the distance remaining
cannot be called up.
• Do not reset the display between service interva ls . Doing so will
resu lt in an incorrect display .
• If the battery is disconnected, the Service Interva l Display values
are retained.
• On vehicles with the Driver Information System, you can also call
up the service interval display~
page 23.
• If service was not performed at the correct time or the service
interva l display was not reset after service was performed, the addi­
tional mileage driven or the elapsed days will be shown as negative
numbers. •

Driver informati on displ ay
Fig. 1 4 Display : Start
menu
Some functions in your vehicle can be set, activated, and controlled
by
M enu s (e.g. Acoustic park assist*). With these menus you can
also select the information shown in the driver information system,
which operates only with the ignition switched on. Operation is
control led by the
I Reset) button and the rocker switch on the wiper
lever =>
page 23, fig. 13 .
The
S ta rt m enu shows you the different disp lay types :
Set
C he ck
M enu off
Each display type in the Start menu contains a submenu with addi­
tiona l options .
Set
C he ck
M enu off
Clock => page 26
Computer => page26
Speed alarm (speed => page27
warning)
Language (6 languages)
Units (distance, fuel con-
=> page26
sumption, temperature)
Displays (gearshift rec -=> page 19
ommendationl
Lighting* (exterior lights, => page 56
turn signals) => page 59
Wiper (service position) => page 66
Window => page 47
Doors (Auto-lock)
Acoustic park assist*
Service
=> page38
=> page 112
=> page20
Chassis number* => page 298
Engine oil temperature*
Registered keys
=> page 35
All of the messages shown in vehicles without
menu display appear on the display screen.
•

_________________________________________________ F_ u_ s_ e_s _ a_n _d_ b_ u _ lb_ s _ __._
The various electrical circuits are protected by fuses. The fuses are
clustered in a centralized unit. The unit is located behind the face
panel at the end of the instrument panel. The crank for operating
the sunroof in case of a power failure is a lso stored behind the face
panel
~ page 49.
Two spare fuses and a sticker identifying the fuses are located on
the inside of the fuse box cover.
You are well advised to keep a supply of spare fuses in your vehicle .
Fuses with the proper ampere ratings are available at your autho ­
rized Audi dealer.
& WARNING
Never replace a fuse with one that has a higher amperage rating.
• A fuse with a too high amperage could damage the electrical
part and cause a fire .
0 Note
• On no accoun t should fuses be repaired (e.g . patched up with tin
foil or wire) as this may cause serious damage elsewhere in the elec­
trical circuit or cause fire.
• If a fuse blows repeatedly, do not keep replacing it. Instead, have
the cause for the repeated short circuit or overload tracked and
fixed. •
Fuse Location , Instrument Panel left
Fus es which can be replaced.
Fig . 201 Fuse carrier
behind the instrument
panel end face, cover
removed
Note that the following table is accurate at the time of going to
press and is subject to change. In the event of discrepancies , the
label on the inside of the cover always takes precedence .
The power seats are protected by circuit breakers, which automati­
cally reset after a few seconds after the overload has been reme -
died. .._
Vehicle care Do-it-yourself service irechnical data