2009 AUDI Q7 warning

Cleaning and protection --------------------=-----------
•
0 Note
To avoid damaging your vehicle, always make sure that there is
sufficient distance between the spray head and soft materials like
rubber hoses, plastic parts and sound-deadening materials. Never
aim the spray head at the same point for a long time. This also
applies to cleaning headlights and painted bumpers. Remember:
the closer the nozzle is to the surface of the material, the greater the
stress on the material. •
Waxing
Wax protects the vehicle's paint.
- Use a manually applied car wax occasionally to protect
the paint .
A good wax coating protects the vehicle paint to a large extent
against the environmental factors listed under => page 312,
"Washing" and even against slight scratches.
You can use a liquid car wax to protect your paint as soon as one
week after your vehicle has been delivered.
Even if you regularly use a
waxing process in automatic car washes,
we recommend that you manually apply a coat of wax to give the
paint extra protection, particularly if water no longer beads on the
clean paint.
Protect plastic body parts with car wax in the same way as the
vehicle body.
During warm weather dead insects tend to collect on the front
bumper and on the forward area of the hood. They are much easier
to remove from paint that is waxed
often.
& WARNING
Always read and heed all WARNINGS and other information
:=> page 312.
0 Note
Do not use car wax on
• matte or anodized metal trim
• rubber or rubber-like trim. •
Polishing
Polishing restores the gloss to the paint.
Polish your vehicle only if the paint has lost its shine and the gloss
cannot be brought back with wax.
If the polish used does not contain preservative compounds, the
paint must be waxed afterwards=> page 375, "Waxing".
& WARNING
Always read and heed all WARNINGS and other information
=> page 312.
0 Note
Do not treat matte anodized metal trim, plastic or rubber parts with
polish or wax. •
Trim strips
Metal trim needs special care.
For environmental reasons, Audi fabricates the bright trim strips
and trim pieces from pure chromium -free aluminum. ._
Vehicle care I t •

___ C_ le_ a_n _i_n ~g_ a_ n_ d _~ p_r _o _t_e _c_ t_ i_o _n ___________________________________________ _
Dirt and marks on the trim strips should be removed with a pH­
b ala nc ed
cleaning agent {do not use a c hrome cleaner). Au thorized
Audi dealers carry c leaning products which have been tested for use
on your vehicle and are not harmfu l to the environment.
To avoid corrosion on the exterior trim strips, only a pH-balanced solution shou ld be used for the windshield washer .
& WARNING
Always re ad and heed all WARNINGS and other inform ation
~ p age31 2.•
Plastic and vinyl
Plastic needs special care.
Use a c lean , damp cloth or sponge to remove dust and light surface
dirt . For other soil, use a lukewarm all -purpose cleaning solution or
a mild saddle soap for viny l trim. Remove water spots and traces of
soap with a clean, damp cloth or sponge . Use a clean, soft cloth to
rub dry.
Grease, tar or oil stains can be removed with a clean cloth or sponge
soaked with all -purpose cleaner or w ith a solvent designed espe ­
cia lly to clean vinyl.
Occasionally apply a colorless vinyl or leather preservative to retain
the material's lus ter and pl iability.
& WARNING
Alw ays re ad and heed all W ARNIN GS and other infor mation
~ pag e 312 . •
Aluminum trim
Use only neutral -pH products to remove spots and deposits from
a luminum surfaces . Chrome care products and alka line cleaners
wi ll attack aluminum surfaces and can damage them over time .
& WARNING
Always read and heed all WARNINGS and oth er inform ation
~ page 312. •
Touch-up paint
Min or paint damages should be touched up immediately.
Use e ither a touch- up paint stick or spray pain t to cover
m inor scratches and n icks.
Your authorized Audi dealer has touch -up paint for minor scratches
and stone chips. Scratches should be touched up soon after they
occur to prevent corrosion.
If a spot starts to rust, however, a simple touch -up job will not be
enough . The affected surface must be sanded smooth and coated
with an anti -rust primer before the painted finish can be restored .
The number for the original vehicle paint can be found on the
vehic le identification labe l~
page 396.
& WARNING
Al way s read and heed all WARNINGS and oth er info rm ation
~ p ag e31 2.•

____________________________________________ ...:C :..: l:..: e :.: a::. n:....:..:..: in~ g~ a~n .:..:d::....! p::. r :..:o:::..::. te:::..::: c:..::t ..:..:io ::::.: n:...__,n
•
Windows
Clear vision to all sides.
Clean all windows regularly to remove road film and
carwash wax buildup.
- Remove snow from windows using a brush.
- Use a plastic ice scraper to remove ice from windows and
mirrors.
- Remove other residue on the windows with a spray-on
glass cleaner.
- Wipe the windows dry with a clean piece of cloth or
kitchen paper towel.
The best way to remove snow from windows and mirrors is to use a
brush. Use a non-abrasive plastic ice scraper -better still, a spray
deicer -to remove
ice from windows and mirrors .
The windows must not be cleaned with insect remover or wax since
these can interfere with the function of the windshield wiper blades (chatter).
Oil, grease , or silicone residue can be removed with glass cleaner or
silicone remover. However, wax residue requires the use of a
specially formulated solvent. Please contact your authorized Audi
dealer for advice on safe products for wax removal.
Windows should also be cleaned on the inside at regular intervals.
Never dry windows with the same chamois that you use to dry
painted surfaces. Wax residue on the chamois can impair vision
through the windows .
& WARNING
• Always read and heed all WARNINGS and other information
=> page 312.
& WARNING (continued)
• The windshield must not be treated with water-repellent mate­
rials. They can increase glare under poor visibility conditions such
as wetness, darkness, or when the sun is low on the horizon. In
addition, they can cause the windshield wipers to chatter.
0 Note
• Never use warm or hot water to remove snow and ice from
windows and mirrors. This could cause the glass to crack.
• To prevent damage to the wires of the rear defogger, do not place
any adhesive stickers on the inside of the rear window over the
wires.
• To help prevent dirt from scratching the window, always scrape
in a forward direction -pushing the scraper away from you -never
back and forth .•
Weatherstrips
Complete car core includes the weatherstrips as well.
Apply a suitable rubber conditioner to the weatherstrips
from time to time.
To be able seal properly, the weatherstrips around the hood, doors,
rear lid, etc. must remain pliable. Spray the weatherstrips with sili ­
cone or coat them with talcum powder or glycerine to retain the
flexibility of the rubber and to protect them against freezing in the
winter.
& WARNING
Always read and heed all WARNINGS and other information
=> page 312.
Vehicle care I t •

_L-_C=..:..: le=- a =-=- n:..:.i.:....n :..::g ~ a:..: n..:. d.:::... ?:: P..:..r -=o --=t :..:e :....:c.:.... t:..:. i-=o -=-n..:.._ __________________________________________ _
[ i ] Tips
Keep si licone sprays off the windshie ld to avoid wiper smear in
rain. •
Cast (light) alloy wheels
Cast (light) alloy wheels require special care.
-Wash the wheels with a sponge or hose brush every
o ther week.
- For deep clean ing afterwards, use only a dedicated acid­
free cast alloy whee l cleaner.
Rub a coat of liquid wax onto the rims every t hree month .
Be sure to reach and treat all parts of the rim.
To preserve the decorative appearance of the cast alloy wheels,
some special care is necessary. In add ition to road dirt and salt,
brake dust is also corrosive . If left on for too long, brake dust can
cause pitting.
Use on ly special
acid -free cleaners formu lated for a lloy rims . Safe
produc ts are available at your authorized Audi dealer. Never leave
the cleaner on the rims longer than specified on the label. If not rinsed off promptly, the acid contained in some cleaners can attack
the threads on the wheel bolts .
Never use abrasive or metal po lishing c leaning agents. If the protec ­
t ive coating has been chipped, e.g . by kicked up road dirt, touch it
up as soon as possible .
& WARNING
• Moisture a nd i ce on b rake s m ay affect brak ing effi cienc y
=> page 291 , "General information ". Te st the brake s carefully ea ch
t ime you wa sh the vehi cle .
& W ARN IN G (c ontinued )
• Always read and h eed all WARNINGS and other inform ation
=> p age 31 2. •
Body cavity sealing
The b ody cavity sealing does not need to b e checked.
All body cavities which could be affected by corrosion have been
thoroughly protected at the factory .
T his seal ing does not require any inspection or add it ional trea t­
ment. If any wax should seep out of the cavity wh en the ambient
t emperature is h igh, i t ca n be removed with a p lastic scrape r and a
suitable solvent.
& WARNING
S olvent s can be dangerous .
• Ben zine is flammable and toxic . If you use benz ine for re moving
the wax , keep sparks , flame and l ighted cigarettes away . Never
dump benzine on th e ground , into open streams or down sewage
dr ains.
• Be sure to ob serve all safety and environmental regulat ion s.
Follow all instru ctions on the cont ainer .
• Alway s r ead and heed all WARNINGS and other info rmation
=> page 312 . •
Chassis
Have the undercoating checked for damage from time to
time.
The lower body shell of your Audi is also thoroughly protected
against corrosion .

_____________________________________________ C_ l_ e _a_ n_ in_ g_a _ n_d_ p_ r_ o_ t _e_ c_t _io _ n __ lftlll
•
Any damage to the undercoating caused by road hazards should be
repa ired promptly.
& WARNING
Too mu ch undercoating in the wro ng pl ace s can cause a fir e.
• Do not appl y ad ditional und ercoating or ru stproofing on or
n ea r the e xhaus t man ifold , ex haust pipe s, catalyt ic c onverter or
heat shields . While d riving , the s ub stan ce used for undercoating
c ould overheat and cau se a fire.
• Alw ays read and heed all WARNINGS and other informat ion
=> pag e 312 . •
Care of interior
MMI display
- C lean the M MI display with a soft c lean cloth and an LCD
cleaner.
The MM I display can be cleaned with a professional ly available "LCD
cleaner". The clot h should be s lightly dampened with the c leaning
fluid to clean the display.
0 Note
T o avoid scratching the MMI display, you should never c lean it dry. •
MMI terminal
- First clean the MMI terminal with a brush to remove dust
from the housing . T
hen w ipe the MM I terminal wit h a clean, so ft, s light ly
dam p cloth.
The M MI termina l shou ld be c leaned w ith a brush first so that no
dirt is trapped between the buttons and the housing. We recom­
mend giving the MMI terminal a fina l w ipe with a c loth moistened
with water and dish washing detergent.
0 Note
To prevent damage, make sure that no fluid ever gets into the MMI
terminal. •
Aluminum trim
Use only neutral -pH produc ts to remove spots and deposits from
aluminum surfaces. Chrome care products and alkaline cleaners
wi ll attack aluminum surfaces and can damage them over time.
& WARNING
Al way s read and h eed all WARNINGS and oth er information
=> page 31 2. •
Fabrics and fabric coverings
Fabrics and fabric coverings (e.g . seats, door trim panels, etc.)
shou ld be c leaned at regular inte rvals with a vacuum cleaner . This
removes surface dirt particles which could become embedded in
the fabric th rough use. Steam cleaners shou ld not be used, because
the steam tends to push the dirt deeper into the fabric and lock it
there .
~
Vehicle care I t •

___ C_ le_ a _ n_i_n ~g _ a_ n_ d __ p_r _o _t _e _c_ t_ i_o _n ___________________________________________ _
Normal c lea ning
Genera lly, we recommend using a sof t sponge or a lint -free
microfiber cloth to the c lean fabric. Brushes should only be used for
carpets and floor mats, since other fabric surfaces cou ld be harmed
by brushes .
Normal surface stains can be cleaned using a commercially avail ­
able foam cleaner . Spread the foam on the surface of the fabric with
a soft sponge and work it in g ent ly. Do not saturat e the fabric. Then
pat the foam d ry using abs orbent, dry cl oths (e .g . micro fiber c loth)
and vacuum it after it has dried completely .
Cleaning stains
Stains caused by beverages (e.g. coffee , fruit juice, etc.) can be
treated w ith a mild detergent so luti on. Apply the detergent so lu tion
with a sponge . In the case of stubborn stains , a d etergent paste can
be applied di rectly t o the sta in and worked into the fabric . After ­
wards , use copious amounts of clean water to remove the
remaining detergen t. Apply the wa ter w ith a damp cloth or sponge
and pat the fabric dry with an absorbent, dry c loth.
Stains from chocolate or makeup should have detergent paste (e .g.
ox -ga ll soap) rubbed into them . Afterwards, remove the soap w ith
water (damp sponge).
A lcohol can be used to treat stains from grease, oil, lipstick o r a ba ll­
point pen. Melted grease or dye must be patted off using absorbent material. It may be necessary to retreat the areas with detergent
paste and water.
In the case of genera l soiling of the upholstery and cover material,
we recommend hiring a specialist that has the eq uipment to c lean
the seat covers and other fabric surfaces by shampooing and spray
extraction .
& WARNING
Always read and heed all WARNINGS and th e information
=> page 31 2.
[ i ] T ips
Open Ve lcro fasteners on your clothing can damage the seat cover.
Please make su re that Ve lcro fasteners are c losed .•
Plastic parts and instrument panel
Always use a clean cloth moistened in clea r water to clean these
areas . For persistent dir t use an Audi approved
solvent -free plastic
cleaner/protecta nt.
& WARNING
Solvent s can change the propertie s of some plastics and make it
ha rder for the airbag to deploy .
• Never clean the instrument panel or the surface of airbag
module s with cleaning pr oduct s that contain so lvents .
• Product s containing solvent s w ill make the surface of this part
porou s.
• Seriou s injuries can result if pla stic parts come loo se when the
ai rbag is deployed .
• Alway s read and heed all WARNING S and other info rm ation
=> page 312 .
0 Note
Cleaning agents containing solvents wil l attack the material and can
change the way it behaves .•

-Cleaning and prot ection
Pt'l:I-~--------------
Applies to vehicles : with na tura l leather
Cleaning and caring for leather upholstery
and trim
N atural leather requires special care and attention.
Normal cleaning
C lean s oiled areas wi th a s lig htly mo istened cotton o r
w oole n cloth.
Mor e stubborn dirt
- More stubborn dirt can be removed using a cloth satu ­
rated with a mild soap solution (2 tablespoons m ild
liquid soap) .
- Neve r allow the soap solution to saturate the leathe r, and
make certain that no water soaks into the seams.
Wipe off the soap solution with a soft, dry clot h.
Cleaning spots
-Remove fresh water-based spots (su ch as coffee, tea,
juices, b lo od) with an a bsorbent c loth or paper towel.
- Remove fresh grease or oil-based spots (such as butter,
mayonnaise, choco late) with an absorbent c loth o r paper
towel, or use the cleaner from the leather care k it if t he
spot has not yet penetrated into the su rface of the
l eather.
- Use an oil/grease dissolving spray, if oil/grease spots
have dried on .
- Remove specific kinds of spots (ballpoint pen , fe lt
marker, fingernai l po lish, water -based paint, shoe polish ,
etc.) with a spot remover specifically formulated for lea ther .
Leather car e
-Every half year use a n approved leather care product
(availa ble from your author ized Audi deale r) to care for
t h e lea ther.
- Apply the produc t very spar ingly.
- Wipe i t off wit h a damp cloth.
If you have any questions about c leaning and caring fo r the lea ther
in your vehicle, i t is best to contact your authorized Audi dealer , who
wi ll be glad to help you a nd tell you about our ful l range of leather
care products, such as:
• Le ather cle aning and care kit
• Creams to care for co lored leather
• Spot r emovers for ba llpoint pens, shoe polish, etc .
• Oil/grease disso lving spray
• New and upcoming products .
& WARNING
Always read and heed all WARNINGS and other info rmation
~ page 312 .
0 Note
• Never use ch em ical solvents (e .g . lighter flu id, turpentine),
waxes, shoe po lish or simi lar products on the leather surfaces in
your Aud i.
• To avoid damage , have s tubbo rn stains removed by a commer ­
cia l cleaning spec ial ist .•

--------------------------------------------~C ~ l~ e ~ a~ n~ in~ g~ a~n ~d~ p~ r ~o~ te~ c~t ~io ~ n~_IIIII
•
A pp lies to vehicles : w it h A lcantara up holste ry
Cleaning Alcantara ® (synthetic suede)
Removing dust and dirt
- Moisten a cloth, squeeze out excess water and wipe down
the seat surfaces.
Removing stains
- Moisten a cloth with lukewarm water or with diluted
ethyl (rubbing) alcohol.
Dab at the stain. Start at the outside and work inwards.
- Once the stain is no longer visible, use a soft dry cloth or
tissue to soak up the moisture.
Do not use leather cleaning products on Alcantara.
You may use a suitable shampoo for removing dust and dirt. Dust and grit in the pores and seams can scratch and damage th e
surface. If the car is left standing in the sun for long periods, the
Alcantara should be protected against direct sunlight to prevent it
from fading. Slight color variations will develop in normal use and
are not an indication of material deterioration.
0 Note
• Never use chemical solvents (e .g. lighte r fluid , tu rpen tine) ,
waxes, shoe polish or s imilar products on Alcantara ® surfaces.
• To avoid damage , have stubborn stains removed by a commer­
cial cleaning specialist.
• Do no t use brushes, stif f spong es or similarly abras ive cleaning
aids. •
Safety belts
Only well-maintained safety belts work reliably when
needed.
Keep belts clean .
- For cleaning, use a mild soap and water solution. Let
belts dry thoroughly and away from direct sunl ight.
- Do not allow inertia reel safety belts to retract before
they are completely dry.
- Check the condition of your safety belts
regularly.
Heavily soiled safety belts may not retract properly.
& WARNING
Damaged safety belts can break in a crash.
• Anything that might damage your safety belts could mean that
you and your passengers would not be adequately protected in an
accident.
• Safety belt performance depends on correct installation. Never
remove belts from the vehicle to clean them.
• Do not use chemical cleaning agents, bleach or dyes. They have
corrosive properties which weaken the webbing.
• When cleaning your safety belts, inspect them for damage.
If
you discover damage, see your authorized Audi dealer.
• Always read and heed all WARNINGS and other information
~ page312. •
Vehicle care I t •