2009 Alfa Romeo GT window

GETTING TO KNOW YOUR CAR
82fig. 88fig. 89fig. 90
UPPER CENTRE VENT
ADJUSTMENT
(fig. 88)
The vent (1) has an opening/closing
control (A).
•= Completely closed.
I= Completely open.
CENTRE SWIVEL VENT
ADJUSTMENT
(fig. 88)
Each vent (2) has a lever (B) which
makes it possible to direct the flow of air
(in the 4 directions: up/down, right/left).
To adjust the air flow, use control (C):
•= Completely closed.
I= Completely open.
SIDE SWIVEL OUTLET
ADJUSTMENT
(fig. 89)
To direct the flow of air, turn the knurled
ring (A) and/or directly use control (B)
as required.
To adjust the air flow, use control (C):
•= Completely closed.
I= Partially open.
II= Completely open.
D- fixed vent for defrosting or demisting
side windows.
REAR SWIVEL OUTLET
ADJUSTMENT
(fig. 90)
To direct the flow of air, turn the knurled
ring (A) and/or directly use control (B)
as required.
To adjust the air flow, use control (C):
•= Completely closed.
I= Partially open.
II= Completely open.
A0A0085bA0A0086bA0A0087b

GETTING TO KNOW YOUR CAR
85
AIR TEMPERATURE
ADJUSTMENT KNOB
Turn the ring of knob (1-fig. 93) clock-
wise or counter-clockwise respectively to
higher or lower the temperature of the air
admitted to the passenger compartment.
FAN SPEED ADJUSTMENT
KNOB
Turning the ring of knob (2-fig. 93) it
is possible to select one of the fan speeds
to personalise the amount of air admitted
to the passenger compartment.
Position0turns off the fan and auto-
matically engages inside air re-circulation
(shown by the lighting up of the led next
to the button 4
v) thereby shutting off
the inlet of outside air to the car.
To switch off inside air re-circulation, press
button (4)
v.
Splitting of air flow between the
windscreen/front side windows
and the lower part of the passenger com-
partment.
Air flow towards the windscreen
and front side windows for demist-
ing/defrosting.
Flow of air to allow quick demist-
ing/defrosting of the windscreen
and front side windows, turning on
rearscreen heating for demisting/defrost-
ing (function called
MAX-DEF).
≤
y
-
AIR DISTRIBUTION KNOB
Turning the knob ring (3-fig. 93), the
following positions are selected in sequence:
Air flow towards the upper centre,
front centre vents and from the
front and rear outlets with the possibility
of adjustment using the controls on the
actual vents.
Splitting of air flow between the pre-
vious vents and the lower part of the
passenger compartment.
Air flow to the lower part of the pas-
senger compartment (front and rear).
μ
w
¥

GETTING TO KNOW YOUR CAR
86
INSIDE AIR RE-CIRCULATION
ON/OFF BUTTON
Pressing button (4-fig. 93)vacti-
vates inside air re-circulation and the led
next to the button lights up.
In this case the climate control system
directly treats the air contained in the pas-
senger compartment, the fan is on.
To switch the air re-circulation feature off
and withdraw air from outside, press the
button again. The inside air recirculation
system makes it possible
to reach the required
“heating” or “cooling” conditions
faster. It is however inadvisable to
use it on rainy/cold days as it
would considerably increase the
possibility of the windows misting
inside, especially if the manual cli-
mate control system is off.
It is advisable to turn on
the inside air recirculation
system
vin queues or
tunnels to avoid admitting pollut-
ed air from outside. The prolonged
use of this function should howev-
er be avoided, especially with sev-
eral persons on board, to avoid the
possibility of the windows misting
inside.
REARSCREEN HEATING
ON/OFFBUTTON
Pressing button (5-fig. 93)(turns
on demisting/defrosting of the rearscreen,
and if present, the door mirrors heating
coils; simultaneously the led next to the but-
ton turns on. This function is timed and
switches off automatically after 20 minutes.
To turn off earlier, press the button again.
IMPORTANTThe system automatical-
ly turns on rearscreen heating if the tem-
perature is below 3°C.
IMPORTANTDo not apply stickers on
the inside of the rearscreen over the heat-
ing filaments to avoid damage which
might cause it to stop working properly.
When cleaning the inside
of the rearscreen, take
care not to damage the
heating filaments.

GETTING TO KNOW YOUR CAR
87
DEMISTING
AND/OR DEFROSTING THE
WINDSCREEN AND FRONT
SIDE WINDOWS, REARSCREEN
AND WING MIRRORS
(MAX-DEF FUNCTION)(fig. 94)
Proceed as follows:
- turn the ring of the air distribution knob
(3) to the
-symbol.
The climate control activates all the func-
tions necessary to quicken demisting/
defrosting of the windscreen and side win-
dows with timing (switching off automati-
cally after 3 minutes), as follows:
- switches off air re-circulation, if engaged;
- sets the maximum air temperature;
- operates the fan at a predefined speed;
- directs the flow of air towards the wind-
screen and front side window vents;
- turns on rearscreen heating and, if pre-
sent, the wing mirror coils. When the max demisting/defrosting func-
tion is on, the led next to the rearscreen
heating button (5)
-will turn on.
IMPORTANTIf the engine is not hot
enough, the function does not immediate-
ly engage the pre-established fan speed,
to restrict the inlet of air to the passenger
compartment that is not warm enough to
demist the windows.
After demisting/defrosting, simply use
the controls to maintain the optimum con-
ditions of vision and comfort.
IMPORTANTThe hotter the engine
the more effective defrosting will be. IMPORTANTIn cases of heavy damp
and/or rain and/or big differences in tem-
perature between inside the car and out-
side, it is advisable to proceed as follows
to demist the windows:
- air re-circulation off, led next to button
(4)
voff;
- pointer of knob (2) at fan second speed
at least;
- pointer of knob (3) on symbol
≤with
the possibility of passing to position
yif
more misting is noted;
To defrost/demist the rearscreen, press
button (5)
(, led next to button on.
A0A0733b
fig. 94

GETTING TO KNOW YOUR CAR
88
HEATING (fig. 95)
To obtain the temperature required, pro-
ceed as follows:
- temperature adjustment knob pointer
(1) on the red sector as required;
- air quantity adjustment knob pointer
(2) on the fan speed required to person-
alise the amount of air admitted;
- air distribution knob pointer (3) on the
required position.
To obtain the maximum heating power
proceed as follows:
- knob pointer (1) as far as it will go clock-
wise (maximum temperature red sector);
- knob pointer (2) on maximum fan
speed;
- air distribution knob pointer (3) on the
required position (position
w) is recom-
mended.
IMPORTANTTo be able to obtain sat-
isfactory passenger compartment warm-
ing, the engine should have reached nor-
mal operating temperature. The filter has the specific capability of fil-
tering external air, thus admitting to the
passenger compartment purified air, free
from particles such as dust, pollen, etc.
In addition to the above mentioned func-
tions, is also reduces the concentration of
pollutants.
The filtering action is active in all air inlet
conditions and it is clearly more effective
with the windows closed.
Have the conditions of the filter checked
at least once a year, preferably at the
onset of summer by Alfa Romeo
Authorised Services. If the car is habitually used in dusty or
polluted areas, the filter should be
checked and replaced at shorter intervals
than those specified in the Programmed
Maintenance Schedule.
If the filter is not replaced
the efficiency of the cli-
mate control system may
be seriously compromised up to
blocking the air flow at the outlets
and vents.
POLLEN FILTER
(for versions/markets where applicable)
A0A0734b
fig. 95

GETTING TO KNOW YOUR CAR
89
AUTOMATIC TWO-ZONE CLIMATE CONTROL SYSTEM
(for versions/markets where applicable)
To start the system (fig. 96):
- turn the knob rings to set the required
temperatures (driver’s side - passenger’s
side).
- press the
AUTObutton.
IMPORTANTThe climate control sys-
tem makes it possible to personalise the
temperatures required on the two side
with a maximum difference of 7°C
between the driver’s side and the passen-
ger’s side.
IMPORTANTThe climate control com-
pressor can only work with the engine run-
ning and external temperature not very
low. With low external tem-
perature the climate con-
trol compressor is unable
to work. It is therefore inadvisable
to use the inside air recirculation
function vwith low outside tem-
perature as windows may mist
over quickly.
For further details about the system and
how to make the best use of it, read the
instructions given in pages that follow.
A0A0203b
fig. 96
The coolant used for the
climate control system is
R134a which meets cur-
rent regulations and does not harm
the environment in the event of ac-
cidental spillage.
Absolutely avoid the use of oth-
er fluids which are incompatible
with the system components.

GETTING TO KNOW YOUR CAR
92
CONTROLS(fig. 97)
1- Inside temperature set display (dri-
ver’s side)
2- Inside temperature adjustment knob
(driver’s side)
3- Fan speed set and system off display
(
OFF)
4- Knob for adjusting the fan speed and
switching the system off
5- Inside temperature set display (pas-
senger’s side)
6- Inside temperature adjustment knob
(passenger’s side)
7- Maximum defrosting/demisting
on/off button for windscreen and front
side windows, rearscreen heating and
wing mirror coils (
MAX-DEFfunction)
8- Inside air re-circulation on/off button
v(manual/automatic)
9- Rearscreen heating and wing mirror
defrosting on/off button
(
10- Air distribution selection buttons 11- Inside air temperature sensor
12- Button for aligning the temperature
set on the passenger’s side with that on
the driver’s side
MONO
13- Button for selecting the system
automatic mode
AUTO
14- Climate control compressor on/off
enable button
√
fig. 97
A0A0090b

GETTING TO KNOW YOUR CAR
99
AIR DISTRIBUTION SELECTION
BUTTONS
(fig. 104)
Pressing one or more buttons (10) it is
possible to manually choose one of the 5
possible air distributions to the passenger
compartment:
REFlow of air to the dashboard centre
and side outlets and rear outlet.
RESplitting of the air flow between the
Zvents to the lower part of the pas-
senger compartment (warmest air)
and the dashboard centre and side ou-
tlets and the rear outlet (coolest air).
The air flow distribution is particularly
useful in spring and autumn, when
the sun is shining.
ZAir flow towards the front and rear
lower parts of the passenger com-
partment. Due to the natural ten-
dency of heat to spread upwards, this
type of distribution allows heating of
the passenger compartment in the
shortest time, also giving a prompt
feeling of warmth to the coldest parts
of the body.
A0A0208b
QSplitting of the air flow between the
Zwindscreen and side window defro-
sting/demisting vents and the lower
part the of the car. This type of air di-
stribution allows satisfactory heating
of the passenger compartment while
preventing misting of the windows.
QAir flow to the windscreen and front
side window vents to demist or de-
frost them. IMPORTANTPressing one of these
buttons turns on (led on button itself on)
or off (led on button off) the associated
functions if the combination chosen is
among the 5 possible ones; if not it only
activates the main function of the button
pressed, without the possibility of turning
off with another press (at least in one dis-
tribution the air flow should be spread in
the passenger compartment).
To restore automatic air distribution con-
trol after a manual selection, press button
(13)
AUTO. fig. 104