2009 Acura TL navigation update

When you set the temperature to its
lower limit ( ) or its upper limit
( ), the system runs at f ull
cooling or heating only. It does not
regulate the interior temperature.
When you adjust a f an control, the
f an is taken out of AUTO mode.To keep stale air and mustiness
f rom collecting, you should have
the f an running at all times.
Keep the system completely of f
f or short periods only.
To turn the system completely of f ,
press the ON/OFF button.
Each time you press this button, the
climate control system switches
between on and of f . Turning on the
system with this button selects your
last climate control selection.
You can also select the appropriate
mode on the driver’s side and the
passenger’s side separately. To
change a mode, press and release
the appropriate side mode control
button. This will take the mode
control out of AUTO mode.
In AUTO mode, the vehicle’s interior
temperature is independently
regulated f or the driver and f ront
passenger according to each
adjusted temperature. The system
also regulates each temperature
basedontheinformationof thesun
light sensor and the sun’s position which is updated automatically by
the navigation’s global positioning
system (GPS). If one side of the
vehicle is getting too much sun, the
system lowers the temperature only
on that side.
When you press this button, the
indicator in the button comes on, and
the passenger’s side temperature
and mode control is synchronized to
thedriver’ssidesettemperatureand
mode control. Changing the
passenger’s side temperature or
mode control makes the indicator go
of f and takes the system out of
SYNC mode.
On models with navigation system
Climate Control System
To Turn Everything Off
ON/OFF Button
SYNC Button
Features
217
\f—\f—y
\f
y
) \f\fy\fy
2009 TL

µµµ
µ
µ µ
µ
µ
Youcanstoreupto12
preset channels using the six preset
buttons. Each button stores one
channel f rom the XM1 band and one
channel f rom the XM2 band.
To store a channel: Press the button. Either
XM1 or XM2 will show in the
display.
Use the selector knob, or the
CATEGORYbarorSCANbutton
to tune to a desired channel.
In category mode, only channels
within that category can be selected.
In channel mode, all channels can be
selected. Pick the preset button you want
f or that channel. Press and hold
the button until you hear a beep. Repeat steps 2 and 3 to store the
f irst six channels.
Once a channel is stored, simply
press and release the proper preset
button to tune to it. Press the button again.
The other XM band will show.
Store the next six channels using
steps 2 and 3.
The selected channel
number does not exist, or is not part
of your subscription, or this channel
has no artist or title inf ormation at
this time. The signal is
currently too weak. Move the vehicle
to an area away from tall buildings,
and with an unobstructed view of the
southern horizon. The encryption
code is being updated. Wait until the
encryption code is f ully updated.
Channels 0 and 1 should still work
normally.
The selected
channel has no artist or title
inf ormation at this time.
There is a problem
with the XM antenna. Please consult
your dealer.
XM is loading the
audio or program inf ormation.
The channel
currently selected is no longer
broadcasting.
3. 4.
5.
2.
1.
Preset
XMRadioDisplayMessages ‘‘----’’‘‘NO SIGNA L ’’
‘‘UPDA T ING’’
‘‘NO INFO’’
‘‘A NT ENNA ’’
‘‘L OA DING’’
‘‘OFF A IR’’
Playing the XMRadio (Models without navigation system)
236
\f—\f—y

\f
y
) \f\fy\f
y
2009 TL

µ
µ µ
µ
µ
µ The signal is
currently too weak. Move the vehicle
to an area away from tall buildings,
and with an unobstructed view of the
southern horizon.
The selected channel
number does not exist, or is not part
of your subscription, or this channel
has no artist or title inf ormation at
this time.
There is
a problem with the XM antenna.
Please consult your dealer.
The encryption
code is being updated. Wait until the
encryption code is f ully updated.
Channels 0 and 1 should still work
normally. XM is loading the
audio or program inf ormation. The channel
currently selected is no longer
broadcasting. Once a channel is stored, press
and release the proper preset
button to tune to it.
Press the button or scroll
up again. The other XM band will
be shown. Store the next six
channels using steps 2 and 3.
Repeat steps 2 and 3 to store the
f irst six channels.
Pick the preset button you want
f or that channel. Press and hold
the preset button until you hear a
beep. You can also pick the
number with the interf ace dial.
Select your desired number and
press and hold ENTER on the
interf ace selector.
In category mode, only channels
within that category can be
selected. In channel mode, all
channels can be selected.
Use the tune, list, or scan f unction
to tune to a desired channel.
5.
3.
4.
2.
Playing the XMRadio (Models with navigation system)
‘‘NO SIGNA L ’’
‘‘----’’
‘‘CHECK A NT ENNA ’’
‘‘UPDA T ING’’
‘‘L OA DING’’
‘‘OFF A IR’’
XM Radio Display Messages
296
\f—\f—y

y
) \f\fy\f\f
y
2009 TL

You can update the Gracenote
Album Inf o (GracenoteMedia
Database) that is included with the
navigation system.
Consult your dealer, or visit (in U.S.), or
(in Canada), to acquire
updated f iles.
Insert the update disc into the disc
slot, or connect the USB f lash
memory device that includes the
update.
You can check the HDD Audio
capacity and remaining space as well
as the Gracenote Music Recognition
Service (CDDB) version included
with the navigation system on the
HDD Setup screen.
Push the interf ace selector down
to display AUDIO MENU.
Turn the interf ace dial and select
Get Album Inf o, then press
ENTER on the interf ace selector.
On the Select an Album screen,
turn the interf ace dial and select
the title inf ormation f or the
Original Playlist, then press
ENTER on the interf ace selector.
You will be returned to the Audio
Menu screen.
1.
1.
2.
3.
www.acura.com
www.acura.ca
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
Updating GracenoteAlbum Inf o
(Gracenote
Media Database)
Checking HDD A udio Capacity
A cquiring T itle Inf ormation
340
NOTE:
MAXIMUM CAPACITY
VERSION
REMAINING CAPACITY
\f—\f—y

y
) \f\fy\fy
2009 TL

Turn the interf ace dial and select
Update Gracenote Inf o, then press
ENTER on the interf ace selector.
Turn the dial to select USB or
DISC on the Update Gracenote
Album inf o screen, then press
ENTER on the selector.
Turn the dial to select Yes on the
conf irmation screen, and the
update will start.
Turn the interf ace dial to select
OK on the conf irmation screen.
Push the interf ace selector down
to select AUDIO MENU in the
HDD playback screen or CD
playback screen.
Turn the interf ace dial to select
HDD Setup, then press ENTER on
the interf ace selector. Af ter updating is complete, press
ENTER on the conf irmation
screen.
Once you perf orm an update any
inf ormation you edited bef ore will be
overwritten. Any music, data, calendar entries,
etc. that have been stored on the
HDD can be deleted.
Press the INFO button, rotate the
interf ace dial to select , and
press ENTER.
Move the interface selector to the
right to navigate to the screen.
On the tab, rotate
the interf ace dial to select , and press ENTER.
Select the item you wish to
delete.
2.
3. 4.
5.
6.
7.
8.
1.
2.
3.
4.
CONT INUED
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
Clearing t he HDD
Set up
Set up
(Other)
Set up (Other) Clear
Personal DataFeatures
341
NOTE:
\f—\f—\fy
\fy
) \f\fy\fy
2009 TL

µ
Gracenote is an internet-based music
recognition service that allows artist,
album, and track inf ormation f rom
CDs and MP3 f iles to display on the
HDD. Gracenote users are allowed 4
f ree updates a year. More
inf ormation about Gracenote, its
f eatures, and downloads are
available at
(in U.S.)
or (in Canada).
CD and music-related data from
Gracenote, Inc., copyright 2000
2008 Gracenote.
Music recognition technology and
related data are provided by
Gracenote
. Gracenote is the
industry standard in music
recognition technology and related
content delivery. For more
information, please visit http://www.
gracenote.com/.
When music is recorded to the HDD
from a CD, information such as the
recording artist and track name are
retrieved f rom the Gracenote
Database and displayed (when
available). Gracenote may not
contain inf ormation f or all albums.
A pop-up screen verif ying whether
the deletion is to be continued or
not will be displayed. Select Yes to
delete,orNotocancel.
A second conf irmation will appear.
Select Yes to delete, or No to
cancel.
If you select ,
the system will automatically restart
af ter deletion. When you are f inished deleting
the data, press the interface
selector down to select .
5.
6.
7.www.acura.com
www.acura.ca
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
Gracenote Music Recognition
Service (CDDB)
Music on HDD Done
342
NOTE:
\f—\f—\fy
\f\fy
) \f\fy\fy
2009 TL

To set the time, press the CLOCK
button until you hear a beep. The
displayed time begins to blink.
Change the hours by pressing the H
(hour) button until the numbers
advance to the desired time. Change
the minutes by pressing the M
(minute) button until the numbers
advance to the desired time.
Press the CLOCK button again to
enter the set time.
You can quickly set the time to the
nearest hour. If the displayed time is
bef ore the half hour, press and hold
the CLOCK button, then press the R
(reset) button to set the time back to
the previous hour. If the displayed
time is af ter the half hour, the same
procedure sets the time f orward to
the beginning of the next hour.The navigation system receives
signals f rom the global positioning
system (GPS), and the displayed
time is updated automatically by the
GPS. Ref er to the navigation system
manual f or how to adjust the time.
1:06 would RESET to 1:00.
1:52 would RESET to 2:00.
For example:
On models with navigation system
On models without navigation system
CONT INUED
Setting the Clock
Features
377
On models without navigation system
CLOCK BUTTONRESET BUTTON
(PRESET 6)
HOUR BUTTON
(PRESET 4) MINUTE BUTTON
(PRESET 5)
U.S. model is shown.
\f—
—y
\f
y
) \f\fy\fy
2009 TL

HFL stores up to 10,000 phone
numbers f or each paired phone. If
you try to import a phonebook
with more than 10,000 numbers,
or phonebook with no numbers at
all, a screen message will notif y
you that data cannot be imported.Up to three category icons are
displayed in the right side of the list.
These category icons indicate how
many numbers are stored f or the
person. If a name has more than
threecategoryicons,‘‘ ’’is
displayed.
The f ollowing category icons will
appear:
You may not be able to store the
maximum number of names and
numbers in some cases.
When you update inf ormation in
your cell phone’s phonebook, you
will need to repeat the import
process. ---
CONT INUED
BluetoothHandsFreeL ink(Models with navigation system)
Features
457
NOTE:
Home
MobileWork
Pager
Fax
Car
Preference
Other
\f—\f—y

y
) \f\fy\fy
2009 TL