2009 Acura TL display

ÎÎ
ε
µ
µ
µ Î
ROAM Status Indicates your
phone is roaming.
Battery Level Status Indicates
the power currently remaining in
your phone’s battery. Five bars
equals f ull battery strength.
Signal Strength Indicates the
network signal strength of the
current phone. Five bars equals
f ull strength.
Caller name/Phone dialing
Indicates the number you dialed or
received, and a caller or receiver
name. Only the number will be
displayed if the caller or receiver’s
inf ormation has not been stored in
the phonebook. Some phones do not send this
inf ormation to HFL.
‘‘ ’’ indicator will be displayed on
the navigation display and center
display if your phone is linked to the
HFL system.
When you receive a phone call, a
pop-up will interrupt the display as
shown. This pop-up shows a caller
name and the phone number that has been stored in the phonebook
(see page ). While the system
searches f or inf ormation f rom the
stored data, ‘‘Now acquiring call
inf ormation’’ will be displayed. If the
caller chooses to hide the number
when making a call, ‘‘No Caller ID’’
will be displayed instead.
When you are operating HFL, or
dialing or receiving calls with the
audio system in use, you will see the
above screen.
You can also see the signal strength
and ROAM status on the center
display. :
455
BluetoothHandsFreeL ink(Models with navigation system)
Incoming Call Display
Features
423
U.S. model is shown.
\f—
—y
\f

\fy
) \f\fy\fy
2009 TL

To operate HFL, use the Pick-Up and
Hang-Up buttons on the lef t side of
the steering wheel.Here are some guidelines f or using
voice control:
Adjust the airflow from both the
dashboard and side vents so they
do not blow against the
microphone on the ceiling.
Close the windows and the
moonroof .
HANG-UP Button: This button is
used to end a call.
PICK-UP Button: This button is used
to answer incoming calls or to make
outgoing calls. You can also go
directly to the Cellular Phone screen
by pressing this button.
BACK Button: This button has the
same function as the CANCEL
button. When you press and release
it, the current voice command is
canceled and the display returns to
the previous screen.
The HFL buttons are used as
f ollows:
TALK Button: This button activates
the voice control system and is used
f or all voice commands. Press and
release it, wait f or a beep, and give a
voice command.
If you use the voice commands to
operate HFL, also use the TALK and
BACK buttons. When voice commands are used,
the fan speed will be automatically
adjusted to low. However, for
better voice recognition, lowering
the f an speed may be necessary.
To enter a command, press and
release the Talk button. After the
beep, say your command in a clear,
natural tone.
HFL Buttons
Using Voice Control
BluetoothHandsFreeL ink(Models with navigation system)
424
BACK BUTTONHANG-UP
BUTTON
TALK
BUTTON PICK-UP BUTTON
\f—\f—y
\fy
) \f\fy\fy
2009 TL

µThe navigation system can
manage up to six phones. If you
attempt to pair a seventh phone, a
screen message will appear,
prompting you to delete one of your
existing phones.
The notif ication is displayed. If OK,
press ENTER. Then the message
‘‘Now your phone is ready f or
hands-free calls’’ appears. If you
want to pair two or more phones,
repeat steps 2 4.
If you want to cancel the
pairing process at this point, press
ENTER to select ‘‘Cancel,’’ or press
the Talk button and say ‘‘Cancel.’’
When the pass-key is transf erred
to HFL, it recognizes and pairs
your cell phone. HFL
automatically attempts to connect
to your cell phone that has just
been paired.
5.
6.
BluetoothHandsFreeL ink(Models with navigation system)
428
NOTE:
NOTE:
\f—\f—y
y
) \f\fy\fy
2009 TL

Rotate the dial to select ‘‘Pass-key’’
and press ENTER, or press the
Talk button and say ‘‘Pass-key.’’
HFL responds ‘‘Would you like to
setup a random or f ixed Pass-
key?’’
Select the Cellular Phone screen,
then move the interface selector
down. Rotate the dial to select
‘‘Setup Bluetooth Phone’’ and
press ENTER, or press the Talk
button and say ‘‘Setup Bluetooth
Phone.’’ HFL responds ‘‘Please
select a Bluetooth Phone item to
setup.’’
Rotate the interface dial to select
‘‘Yes’’ and press ENTER, or press
the Talk button and say ‘‘Yes.’’ The
display changes to the deleting
procedure. To delete a phone, see
page . When the phone is
deleted, you can pair the seventh
(now sixth) phone to the system.
HFL uses a Bluetooth pass-key to
pair a cellular phone. By def ault, the
system generates and uses a random
pass-key f or any Bluetooth
connection. You can change this
setting to the fixed pass-key. Do the
f ollowing.
1.
2.
431
CONT INUED
Specif ying t he Bluet oot hPass-key
BluetoothHandsFreeL ink(Models with navigation system)
Features
429
——y
y
) yy
2009 TL

You can change to another phone
when there are multiple paired
phones.ActivatetheDiscoverymodeof
the Bluetooth-compatible phone
you would like to link.
Press the INFO button, rotate the
dial to select ‘‘Cellular Phone,’’ and
press ENTER, or press the Talk
button and say ‘‘Cellular Phone.’’
HFL responds ‘‘Which cellular
phone item would you like to
select?’’
The above screen is displayed.
Rotate the dial to select ‘‘Yes’’ and
press ENTER, or press the Talk
button and say ‘‘Yes.’’
4. 1.
2.
To change f rom the currently linkedphone to another paired phone
BluetoothHandsFreeL ink(Models with navigation system)
432
\f—\f—y

\fy
) \f\fy\fy
2009 TL

Move the interf ace selector down
to select the ‘‘Phone setup’’ screen,
or press the Talk button and say
‘‘Phone setup.’’ HFL responds
‘‘Please select the phone setup
item.’’
Rotate the dial to select ‘‘Search
for next phone’’ and press ENTER,
or press the Talk button and say
‘‘Search f or next phone.’’HFL attempts to connect with
another paired phone, and the
message ‘‘Searching f or a Bluetooth
phone’’ appears.
If the above screen is displayed,
pairing has f inished. You can make calls using any phone
number or by using a name in the
HFL phonebook. You can also redial
f rom an incoming or outgoing
number. During a call, HFL allows
youtotalkupto30minutesafteryou
set the power mode to VEHICLE
OFF (LOCK). Continuing a call
without running the engine may
discharge and weaken the vehicle’s
battery.
For more inf ormation on how to
select the power mode, see page .
3.
178
CONT INUED
BluetoothHandsFreeL ink(Models with navigation system)
Making a Call
Features
433
\f—
—y
\f

y
) \f\fy\fy
2009 TL

Rotate the dial to select ‘‘Dial’’ and
press ENTER, or press the Talk
button and say ‘‘Dial.’’ HFL
responds ‘‘Please say the cellular
phone number continuously.’’Rotate the dial and press ENTER
to select each number, or press
the Talk button and say the entire
number as a continuous string.
For example, say ‘‘123-456-7890.’’
If the wrong number is displayed
on the screen, press the Talk
button again and say ‘‘Delete’’ or
‘‘Clear.’’ All digits will be cleared.
With your phone on and the power
mode in ACCESSORY or ON,
press the INFO button.
For more inf ormation on how to
select the power mode, see page
.
Rotate the dial to select ‘‘Cellular
Phone’’ and press ENTER, or
press the Talk button and say
‘‘Cellular Phone.’’ HFL responds
‘‘Which cellular phone item would
you like to select?’’
2.
3.4.
1.
178
To make a call by dialing a number, dothis:
BluetoothHandsFreeL ink(Models with navigation system)
434
Example
\f—\f—y
y
) \f\fy\fy
2009 TL

ÌHFL Calling display appears,
notifying you that the system is
dialing the entered phone number.
Once connected, you will hear the
person you called through the
audio speakers. To change the
volume, use the audio system
volume knob or the steering wheel
volume controls. To end the call, rotate the dial to
select ‘‘Hang-up’’ and press
ENTER, or press the Hang-Up
button on the steering wheel.
To delete a number with the
interf ace dial, move the selector to
the left and release it. To delete all
the numbers in one go, move the
selector to the lef t and hold it.
To enter a pound ( ), say
‘‘pound.’’ To enter a star (*), say
‘‘star.’’
Onthescreen,movetheinterface
selector to the right to select a pound
or star.
When you have f inished, press the
Pick-Upbuttononthesteering
wheel or move the interf ace
selector down to make the call, or
press the Talk button and say
‘‘Dial.’’ HFL responds ‘‘Dialing.’’
5.
6.7.
CONT INUED
BluetoothHandsFreeL ink(Models with navigation system)
Features
435
NOTE:
Example
\f—
—y
\f
y
) \f\fy\f\fy
2009 TL