Page 383 of 648

The security system helps to protect
your vehicle and valuables f rom thef t.
The horn sounds and a combination
of headlights, parking lights, side
marker lights and taillights f lash if
someone attempts to break into your
vehicle or remove the audio unit.
This alarm continues f or 2 minutes,
then the system resets. To reset an
activated system before the 2
minutes have elapsed, unlock the
driver’s door with the key or use the
remote transmitter/keyless access
remote.
You can also turn off an activated
system by grabbing either f ront door
handle while carrying the keyless
access remote to unlock the door.
To enter the clock setting, turn
the selector knob to select ‘‘SET,’’
then press the knob. The display
will return to the menu item
display.
Press either the RETURN or
SETUPbuttontogobacktothe
normal display. The security system automatically
sets 15 seconds after you lock the
doors, hood, and trunk. For the
system to activate, you must lock the
doors f rom the outside with the key,
driver’s lock tab, master door lock
switch, or remote transmitter
(keyless access remote on models
with keyless access system). The
security system indicator on the
instrument panel starts blinking
immediately to show you the system
is setting itself .
11.
10.
On models with keyless access system
Setting the Clock, Security System
Security System
380
SECURITY SYSTEM INDICATOR
\f—
—y
\f
y
) \f\fy\fy
2009 TL
Page 384 of 648

You can also set the security system
by pressing the lock button on either
f ront door handle while carrying the
keyless access remote.Once the security system is set,
opening any door (without using the
key or the remote transmitter/
keyless access remote), the hood, or
the trunk will cause the system to
alarm. It also alarms if the audio unit
is removed f rom the dashboard or
the wiring is cut.
With the system set, you can still
open the trunk with the remote
transmitter/keyless access remote
without triggering the alarm. The
alarm will sound if the trunk is
opened with the trunk release button
on the driver’s door, the trunk
release handle behind the trunk
pass-through cover, or the
emergency trunk opener. Use the remote transmitter/
keyless access remote to quickly
check that the hood, the trunk, and
all doors are closed. Push the lock
button twice within 5 seconds. There
should be an audible conf irmation
beep.
The security system will not set if
the hood, trunk, or any door is not
f ully closed. If the system will not set,
check the door and trunk open
monitor on the multi-inf ormation
display (see page ) to see if the
doors and trunk are f ully closed.
Since it is not part of the monitor
display, manually check the hood.
Do not attempt to alter this system
or add other devices to it. 11
On models with keyless access system
Security System
Features
381
NOTE:
\f—
—y
\f
y
) \f\fy\fy
2009 TL
Page 410 of 648

You can make calls using any phone
number, or by using a name in the
HFL phonebook. You can also redial
the last number called. During a call,
HFLallowsyoutotalkupto30
minutes af ter you remove the key
f rom the ignition switch. Continuing
a call without running the engine
may discharge and weaken the
vehicle’s battery.With your phone on and the
ignition switch in the
ACCESSORY (I) or ON (II)
position, press and release the
Talk button. After the beep, say
‘‘Call’’ or ‘‘Dial.’’
HFL responds ‘‘What name or
number would you like to call/
dial? Press the Talk button and say
a name, a number, or say list to
hear the phonebook entries.’’
Press and release the Talk button.
Af ter the beep, say the number
you want to call. For example, say
‘‘123 456 7891.’’
HFL responds ‘‘123 456 7891.
Press the Talk button and
continue to add numbers, or say
Call or Dial to place a call.’’Press and release the Talk button.
Af ter the beep, say ‘‘Call’’ or ‘‘Dial.’’
HFL responds ‘‘Calling’’ or
‘‘Dialing.’’
Once connected, you will hear the
person you called through the
audio speakers. To change the
volume, use the audio system
volume knob or the steering wheel
volume controls.
To end the call, press the Back
button.
1.
2.
4.
3.
To make a call using a phone number,
do this:
CONT INUED
BluetoothHandsFreeL ink(Models without navigation system)
Making a Call
Features
407
\f—\f—y
y
) \f\fy\f
y
2009 TL
Page 413 of 648

If you receive a call when you are not
on the phone, HFL interrupts the
audio system (if it is on), and plays
the incoming call notif ication, if
activated. To answer the call, press
the Talk button and begin speaking.
If you don’t want to answer the call,
press the Back button.
If your phone has call waiting, and
you receive a call when you are on
the phone, press and release the
Talk button to answer it. When you
do this, the original call is placed on
hold. To return to the original call,
press the Talk button again. If you
don’t want to answer the new call,
disregard it, and continue with your
original call. If you want to hang up
the original call and answer the new
call, press the Back button.You can transfer a call from HFL to
your phone, or f rom your phone to
HFL.
To transfer a call from HFL to your
phone, or f rom your phone to HFL,
do this:
Press and release the Talk button.
Af ter the beep, say ‘‘Transf er.’’ The
audio switches between HFL and the
phone.
This f unction allows you to transf er a
call automatically to the HFL system.
If you get into the vehicle while you
are on the phone, a call will be
transferred automatically to the HFL
system when you turn the ignition
switch to the ACCESSORY (I)
position.
With this function activated, you can
also make a call by dialing with the
number keys on the phone which
has been paired to the HFL system.
The automatic transferring function
can be set to on or of f .
BluetoothHandsFreeL ink(Models without navigation system)
Receiving a Call
Transf erring a CallAutomatic Transf erring
410
\f—\f—y
y
) \f\fy\f
y
2009 TL
Page 430 of 648
CONT INUED
Move the interf ace selector down.
The ‘‘Phone setup’’ screen appears.
Rotate the dial to select ‘‘Setup
Bluetooth Phone,’’ and press
ENTER, or press the Talk button
and say ‘‘Phone setup.’’ HFL
responds ‘‘Please select the phone
setup item.’’ Press the Talk button
and say ‘‘Setup Bluetooth Phone.’’
HFL responds ‘‘Please select a
Bluetooth Phone item to setup.’’When a screen message appears
that provides a pass-key, enter the
pass-key on your cell phone when
prompted in its discovery mode.
Make sure your phone is in
Discovery mode at this point.
Rotate the dial to select ‘‘Pair
phone’’ and press ENTER, or
press the Talk button and say
‘‘Pair phone.’’
To get your phone into its
discovery mode, ref er to the
phone’s operation manual. 4.
3.
2.
BluetoothHandsFreeL ink(Models with navigation system)
Features
427
Example
\f—\f—y
\fy
) \f\fy\fy
2009 TL
Page 431 of 648
µThe navigation system can
manage up to six phones. If you
attempt to pair a seventh phone, a
screen message will appear,
prompting you to delete one of your
existing phones.
The notif ication is displayed. If OK,
press ENTER. Then the message
‘‘Now your phone is ready f or
hands-free calls’’ appears. If you
want to pair two or more phones,
repeat steps 2 4.
If you want to cancel the
pairing process at this point, press
ENTER to select ‘‘Cancel,’’ or press
the Talk button and say ‘‘Cancel.’’
When the pass-key is transf erred
to HFL, it recognizes and pairs
your cell phone. HFL
automatically attempts to connect
to your cell phone that has just
been paired.
5.
6.
BluetoothHandsFreeL ink(Models with navigation system)
428
NOTE:
NOTE:
\f—\f—y
y
) \f\fy\fy
2009 TL
Page 432 of 648

Rotate the dial to select ‘‘Pass-key’’
and press ENTER, or press the
Talk button and say ‘‘Pass-key.’’
HFL responds ‘‘Would you like to
setup a random or f ixed Pass-
key?’’
Select the Cellular Phone screen,
then move the interface selector
down. Rotate the dial to select
‘‘Setup Bluetooth Phone’’ and
press ENTER, or press the Talk
button and say ‘‘Setup Bluetooth
Phone.’’ HFL responds ‘‘Please
select a Bluetooth Phone item to
setup.’’
Rotate the interface dial to select
‘‘Yes’’ and press ENTER, or press
the Talk button and say ‘‘Yes.’’ The
display changes to the deleting
procedure. To delete a phone, see
page . When the phone is
deleted, you can pair the seventh
(now sixth) phone to the system.
HFL uses a Bluetooth pass-key to
pair a cellular phone. By def ault, the
system generates and uses a random
pass-key f or any Bluetooth
connection. You can change this
setting to the fixed pass-key. Do the
f ollowing.
1.
2.
431
CONT INUED
Specif ying t he Bluet oot hPass-key
BluetoothHandsFreeL ink(Models with navigation system)
Features
429
——y
y
) yy
2009 TL
Page 433 of 648
Rotate the dial to select either
‘‘Fixed’’ or ‘‘Random’’ and press
ENTER, or press the Talk button
and say ‘‘Fixed’’ or ‘‘Random.’’
The navigation system generates
and uses a random pass-key f or
subsequent phone pairing.
HFL returns to the Setup Bluetooth
phone screen. Specif y a 4-digit number in the pass-
keyentryscreenandmovethe
interf ace selector down. The
specif ied number will be generated
and used f or subsequent phone
pairing.
HFL responds ‘‘Please say your 4-
digit pass-key.’’Refer to the navigation system
manual f or inf ormation on how to
enter numbers.
3.
When selecting ‘‘Random’’ When selecting ‘‘Fixed’’
BluetoothHandsFreeL ink(Models with navigation system)
430
Example
\f—\f—y
y
) \f\fy\fy
2009 TL