2009.5 Peugeot 308 CC Dag parking brake

[x] Cancel search: parking brake

Page 5 of 256

Peugeot 308 CC Dag 2009.5  Owners Manual 1
!
23
INSTRUMENTS and CONTROLS
 The  warning  lamps  may  come  on  
�c�o�n�t�i�n�u�o�u�s�l�y� �o�r� �fl� �a�s�h�.�  
 Certain  warning  lamps  may  come  
on  in  two  different  modes.  Only  by

Page 8 of 256

Peugeot 308 CC Dag 2009.5  Owners Manual 1
!
26
INSTRUMENTS and CONTROLS
 When the engine is running or the vehi- 
cle  is  moving,  the  lighting  of  one  of  the 
following  warning  lamps  indicates  the 
occurrence of a fault requiring

Page 11 of 256

Peugeot 308 CC Dag 2009.5  Owners Manual 1
!
29
INSTRUMENTS and CONTROLS
  Airbags.  
  If  this  is  displayed,  it  indicates  
the occurrence of a fault in one 
of  the  airbag,  roll-over  hoop 
or  pretensioning  seat  belt  sys-
tems.

Page 115 of 256

Peugeot 308 CC Dag 2009.5  Owners Manual 8
!
i
!
115
DRIVING
 When  parking  on  a  slope,  direct  
your wheels against the pavement, 
pull  the  parking  brake  on  and  en-
gage a gear.   
     PARKING BRAKE 
 Mechanical  brake  to  hold

Page 117 of 256

Peugeot 308 CC Dag 2009.5  Owners Manual 8
117
DRIVING
           "PORSCHE TIPTRONIC SYSTEM" AUTOMATIC GEARBOX 
 Four  or  six  speed  automatic  gearbox  
which offers a choice between the com-
fort  of  fully  automatic  operation,  en-
ha

Page 118 of 256

Peugeot 308 CC Dag 2009.5  Owners Manual 8
!
!
i
118
DRIVING
  Moving off  
   
�    Apply the parking brake. 
  
�    Select position   P  or   N . 
  
�    Start the engine.  
 If this procedure is not followed, an au- 
dible sign

Page 119 of 256

Peugeot 308 CC Dag 2009.5  Owners Manual 8
PRND
!
i
119
DRIVING
  Stopping the vehicle  
 Before  switching  off  the  engine,  you  
can engage position   P  or   N  to place the 
gearbox in neutral.  
 In  both  cases,  apply  the  parking

Page 134 of 256

Peugeot 308 CC Dag 2009.5  Owners Manual 9
!
�1�3�4
CHECKS
 Only  use  products  recommended  
by PEUGEOT or products of equiv-
�a�l�e�n�t� �q�u�a�l�i�t�y� �a�n�d� �s�p�e�c�i�fi� �c�a�t�i�o�n�s�.�  
 In  order  to  optimise  the  operation