PRACTICAL INFORMATION
172
Risk of electrocution
Xenon bulbs (D1S-35W) must
b e r e p l a c e d b y a P E U G E O T
dealer.
CHANGING A BULB
Procedure for replacing a faulty bulb
with a new bulb without the use of
tools.
Model with halogen lights
1. Direction indicators (HP24-24W).
2. Dipped headlamps (H7-55W).
3. Main beam headlamps (H7-55W).
4. Daytime lights (HP24-24W).
5. Fog lamps (PS24-24W).
6. Side lights (W5-5W).
1. Direction indicators (HP24-24W).
2. Dipped/main beam headlamps
(D1S-35W).
3. Daytime/side lights (P21/5W).
4. Fog lamps (PS24-24W).
Model with xenon lights a
nd
directional headlamps I n s o m e c l i m a t i c c o n d i t i o n s
(e.g. low temperature or hu-
m i d i t y ) , t h e p r e s e n c e o f m i s t -
ing on the internal surface of the glass
of the headlamps and rear lamps is
normal; it disappears after the lamps
have been on for a few minutes.
T h e h e a d l a m p s a r e fi t t e d w i t h
polycarbonate glass with a
p r o t e c t i v e c o a t i n g :
do not clean them using a dry
or abrasive cloth, nor with a
detergent or solvent product,
u s e a s p o n g e a n d s o a p y w a t e r ,
when using a high pressure wash-
e r o n p e r s i s t e n t m a r k s , d o n o t d i -
rect at the lamps or their outlines
f o r t o o l o n g , s o a s n o t t o d a m a g e
their coating and their seals.
Front lamps
Do not touch the bulb directly with
y o u r fi n g e r s , u s e l i n t - f r e e c l o t h s .
Changing a halogen bulb should only
be done after the headlamp has been
switched off for a few minutes (risk of
serious burns).
I t i s i m p e r a t i v e t o u s e o n l y a n t i - u l t r a -
violet (UV) type bulbs in order not to
damage the headlamp.
