2009.5 Citroen C5 DAG display
[x] Cancel search: displayPage 233 of 306
229
RADIO
1 1
2
3
0 6
When the current radio station is displayed on the screen, press OK.
The radio source short-cuts menu appears and providesovides access to t h e f o l l o w i n g s h o r t - c u t s :
Select the function required and press O K t o c o n fi r m t o g a i n a c c e s s t o t h e corresponding settings.
TA
The RDS, if displayed, allows you to continue listening to the same station by automatic retuning to alternative freque ncies. However, in certain conditions, coverage of an RDS station may not be assured throughout the country as radio stations do not cover 100 % of the territory. This explains the loss of reception of the station during a journey.
T h e e x t e r n a l e n v i r o n m e n t ( h i l l , b u i l d i n g , t u n n e l , u n d e r g r o u n d c a r p a r k . . . ) m a y i n t e r f e r e w i t h t h e reception, including in RDS following mode. This ph enomenon is a normal result of the way in which radio waves are transmitted and does not in any way indicate a failure of the audio equipment.
R D S - R E G I O N A L M O D E
Press the RADIO button to display the list of stations received locally sorted in alphabetical order. Select the station required by turning t h e r i n g a n d p r e s s t o c o n fi r m .
Press one of the buttons on the numeric keypad fo r more than 2 s e c o n d s t o s t o r e t h e c u r r e n t s t a t i o n . A b l e e p c o n fi r m s t h a t i t h a s been stored. Press the button on the numeric keypad to recall the stored radio station.
RDS
RADIOTEXT
R E G I O N A L P R O G .
AM
RADIO
When the "RADIO" screen is displayed, turn the ring or use the 4-direction navigator to select the previous or next station on the list.
While listening to the radio, press buttons and for the automatic search for a lower or higher frequency.
Page 235 of 306
231
2
ABC 3
DEF
5
JKL
4
GHI 6
MNO
8
TUV
7
PQRS 9
WXYZ
0
* #
1
RADIO MEDIA
NAV ESC TRAFFIC
SETUP
ADDR BOOK
4
5
6
MEDIA
2
7
3
1
MEDIA
0 7
SELECTING/PLAYING
C D , M P 3 / W M A C D , M P 3 / W M A S D C A R D /
USB READER
T h e p l a y i n g a n d d i s p l a y i n g o f a n M P 3 / W M A c o m p i l a t i o n m a y d e p e n d o n t h e r e c o r d i n g p r o g r a m m e a n d / o r t h e p a r a m e t e r s u s e d . We recommend the ISO 9660 recording standard. Press the MEDIA button.
Select the "Select media" function a n d p r e s s O K t o c o n fi r m .
Press this button.
Select the music source required. P r e s s O K t o c o n fi r m . P l a y b e g i n s .
SELECT MEDIA
Press the MEDIA button again or select the "Media" Menu function and p r e s s O K t o c o n fi r m .
When the "MEDIA" screen is displayed, turn the ring up or down to select the previous or next compatible source.
"MEDIA" MENU
T h e l i s t o f t r a c k s o r M P 3 / W M A fi l e s a p p e a r s u n d e r
" M e d i a " M e n u .
Insert the audio or MP3 CD in the player, the SD card in the card reader or the USB peripheral in the USB reader. Play begins automatically.
MP3 CDs, SD cards or USB peripherals are the compatible sources.
MUSIC MEDIA PLAYERS
Page 238 of 306
234
1
3
4
MEDIA
2 2
3
MEDIA
1
MEDIA
MEDIA
0 7
2
ABC 3
DEF
5
JKL
4
GHI 6
MNO
8
TUV
7
PQRS 9
WXYZ
0
* #
1
RADIO MEDIA
NAV ESC TRAFFIC
SETUP
ADDR BOOK C o n n e c t t h e p o r t a b l e e q u i p m e n t ( M P 3 p l a y e r , c a m c o r
d e r , c a m e r a … ) C o n n e c t t h e p o r t a b l e e q u i p m e n t ( M P 3 p l a y e r , c a m c o r d e r , c a m e r a … ) t o t h e R C A s o c k e t ( w h i t e a n d r e d f o r a u d i o ; r e d a n d y e l l o w f o r v i d e o ) t o t h e R C A s o c k e t ( w h i t e a n d r e d f o r a u d i o ; r e d a n d y e l l o w f o r v i d e o ) i n t h e g l o v e b o x u s i n g a J A C K / R C A a u d i o c a b l e .
Press the MEDIA button then press it again or select the "Media" Menu f u n c t i o n a n d p r e s s O K t o c o n fi r m .
Select the AUX music source and p r e s s O K t o c o n fi r m . P l a y b e g i n s automatically.
Select "Select media" then "External d e v i c e ( A V ) " a n d p r e s s O K t o a c t i v a t e i t .
E X T E R N A L D E V I C E
The display and management of the controls is via the portable equipment.
U S I N G A N E X T E R N A L D E V I C E ( A U X )
A U D I O / V I D E O / R C A C A B L E N O T S U P P L I E D
I f t h e e x t e r n a l d e v i c e i s n o t a c t i v a t e d , s e l e c t " E x t . D e v i c e ( A u x ) management" to activate it.
V I E W I N G A V I D E O D V D
Select the video source required ("DVD-Video", "E xternal device ( A V ) " ) . P r e s s O K t o c o n fi r m . P l a y b e g i n s .
Press the MEDIA button to gain access to the DVD menu at any time, or to the functions of the Media Menu w h i c h a d j u s t t h e v i d e o ( b r i g h t n e s s / c o n t r a s t , i m a g e f o r m a t . . . ) .
If the DVD does not appear on the screen, press the MODE button to gain access to the "MEDIA" screen which displays the DVD screen.
Insert the DVD in the player. Play begins automatically.
The 4-direction navigator and the chromed ring allow you to move the DVD selection cursor. Change chapter by pressin g the or button.
MUSIC MEDIA PLAYERS
Page 240 of 306
236
0 8
1
3
5
4
2
1
of the Bluetooth equipment used. Refer to your telephone's manual and your operator to check which services you have access to. A list of mobile telephones which offer the best range of services is available from dealers.
USING THE TELEPHONE
CONNECTING A BLUETOOTH
TELEPHONE
For safety reasons and because they require prolo nged attention on the part of the driver, the operations for pairing the Bluetooth mobile telephone to the hands-free system of the NaviDrive 3D must be carried out with the vehicle stationary and the ignition on.
Activate the telephone's Bluetooth function. The last telephone connected is reconnected automatically.
If no telephone is connected, the system prompts you to "Connect phone". Select "Yes" and press OK to c o n fi r m .
Enter the authentication code on the telephone. The code to be entered is displayed on the screen.
To change the telephone connected, press the TEL button, then select Phone menu, then "Select phone" then "Connect Bluetooth phone" then select the telephone required or "Search phone". P r e s s O K a t e a c h s t e p t o c o n fi r m .
Once the telephone has been connected, the NaviDr ive 3D can synchronise the address book and the call list. This synchronisation may take a few minutes * .
T h e l i s t o f t e l e p h o n e s c o n n e c t e d p r e v i o u s l y ( 4 m a x i m u m ) a p p e a r s o n the multifunction screen. Select the telephone requ ired then select "Connect phone" for a new connection. Select "Delet e pairing" to cancel the connection to the telephone.
Press the TEL button.
F o r a fi r s t c o n n e c t i o n , s e l e c t "Search phone" and press OK to c o n fi r m . T h e n s e l e c t t h e n a m e o f t h e telephone.
SEARCH PHONE
Page 242 of 306
238
3
1 1
2
3
2 0 8
Press the end of the steering mounted control to accept the call or end the call in progress.
Select the "Yes" tab to accept or "No" t o r e f u s e a n d c o n fi r m b y p r e s s i n g O K .
R E C E I V I N G A C A L L MAKING A CALL
An incoming call is announced by a ring and a supe
rimpperimposed display on the screen.
T o h a n g u p , p r e s s t h e H A N G U P T E L button or press OK and select "End c a l l " t h e n c o n fi r m b y p r e s s i n g O K .
END CALL
Press the PICK UP TEL button.
Press the end of the steering mounted control for more than two seconds to open the address book.
It is also possible to select a number from the address book. You can select "Dial from address book". The NaviDrive 3D permits the recording of up to 4 096 entries.
Select "Dial number", then dial the telephone number using the virtual keypad.
Select the "Phone" menu function and p r e s s O K t o c o n fi r m .
DIAL NUMBER
"PHONE" MENU
The list of the last 20 calls made and received in the vehicle appears under "Phone" menu. You can select a number and pre ss OK to make the call. YESNO
T h e P I C K U P T E L b u t t o n a c c e p t s , t h e H A N G U P T E L b u t t o n r e f u s e s T h e P I C K U P T E L b u t t o n a c c e p t s , t h e H A N G U P T E L b u t t o n r e f u s e s the incoming call.
USING THE TELEPHONE
Page 247 of 306
243
SETUP
1
2
3
4
3
4
2
3
3
3
3
2
3
4
4
4
4
2
4
3
2
4
4
3
4
4
3
3
3
4
4
4
4
4
4
4
4
3
4
4
5
5
5
4
5
5
3
"SETUP" MENU
LANGUAGE & SPEECH
M e n u l a n g u a g e
Deutsch
English
Español
Français
Italiano
Nederlands
Polski
Portuguese
V o i c e c o n t r o l
Voice control active
Tutorial
Basics
Examples
Tips
Speaker adaptation
New speaker adaptation
Delete speaker adaptation
V o i c e o u t p u t v o l u m e
DATE & TIME
S e t d a t e & t i m e
D a t e f o r m a t
T i m e f o r m a t
DISPLAY
B r i g h t n e s s
C o l o u r
Steel
b l u e l i g h t ( o n l y i n d a y m o d e )
Orange Ray
Blue Flame
M a p c o l o u r
Day mode for map
Night mode for map
A u t o . D a y / N i g h t f o r m a p
UNITS
T e m p e r a t u r e
Celsius
Fahrenheit
M e t r i c / I m p e r i a l
km
Miles
SYSTEM
F a c t o r y r e s e t
S o f t w a r e v e r s i o n
A u t o m a t i c s c r o l l i n g
Page 250 of 306
246
QUESTION SOLUTION ANSWER
The "TA" box is ticked. H o w e v e r , c e r t a i n t r a f fi c jams along the route are not indicated in real time.
On starting, it is several minutes before the system begins to receive the t r a f fi c i n f o r m a t i o n . W a i t u n t i l t h e t r a f fi c i n f o r m a t i o n i s b e i n g r e c e i v e d c o r r e c t l y ( d i s p l a y i n g o f t h e t r a f fi c i n f o r m a t i o n s y m b o l s o n t h e m a p ) .
I n c e r t a i n c o u n t r i e s , o n l y m a j o r r o u t e s ( m o t o r w a y s . . . ) a r e l i s t e d f o r t h e t r a f fi c i n f o r m a t i o n .
The time taken to calculate a route sometimes seems longer than usual.
This phenomenon is normal. The system is d e p e n d e n t o n t h e t r a f fi c i n f o r m a t i o n a v a i l a b l e .
T h e p e r f o r m a n c e o f t h e s y s t e m m a y s l o w d o w n t e m p o r a r i l y i f a C D / D V D i s b e i n g c o p i e d o n t o t h e J u k e b o x a t t h e s a m e t i m e a s a r o u t e i s b e i n g calculated.
W a i t u n t i l t h e C D / D V D h a s b e e n c o p i e d o r s t o p the copying before starting the guidance function.
Does the emergency call function work without a S I M c a r d ?
No, as certain national regulations impose the pre sence of a SIM card in order to make an emergency call. Insert a valid SIM card in the slot.
The altitude is not displayed. O n s t a r t i n g , t h e i n i t i a l i s a t i o n o f t h e G P S m a y t a k e u p t o 3 m i n u t e s t o receive more than 4 satellites correctly. Wait until the system has started up completely. C h e c k t h a t t h e r e i s a G P S c o v e r a g e o f a t l e a s t 4 satellites (long press on the SETUP button, t h e n s e l e c t " G P S c o v e r a g e " ) .
D e p e n d i n g o n t h e g e o g r a p h i c a l e n v i r o n m e n t ( t u n n e l . . . ) o r t h e w e a t h e r , t h e c o n d i t i o n s o f r e c e p t i o n o f t h e G P S s i g n a l m a y v a r y . This phenomenon is normal. The system is dependent on the conditions of reception of the G P S s i g n a l .
I receive a speed camera alert for a speed camera which is not on my route.
The speed camera audible warning does not work.
The system announces all speed cameras positioned in a cone located in front of the vehicle. It may detect speed cameras located on nearby or parallel roads.
The audible warning is not active.
The alert volume is set to minimum.
Zoom in on the map to view the exact position of the speed camera.
Activate the audible warning on Navigation Menu, Settings, Set parameters for risk areas.
Increase the volume of the alert when passing a speed camera.
Page 252 of 306
248
The system does not receive SMS. The Bluetooth mode does not permit sending of the SMS to the system. Use your SIM card and the internal telephone.
The SIM card used is a twin card. Use the original SIM card to receive the SMS.
I cannot update the h a z a r d o u s l o c a t i o n POIs.
The Navigation Menu - "Update personal POI" is not displayed. Check that the medium used for the update ( S D c a r d o r U S B s t i c k ) i s i n s e r t e d c o r r e c t l y .
An error message is displayed at the end of the procedure. - Start the procedure again in full. - Consult a CITROËN dealer if the problem - Start the procedure again in full. edure
persists. - Check that the data on the MEDIUM is s u p p l i e d b y a n o f fi c i a l p a r t n e r o f C I T R O Ë N .
QUESTION SOLUTION ANSWER
The voice frequencies ( D T M F ) a r e n o t active when I am communicating and I press numbers on the keypad.
The numeric buttons on the keypad are only active for calls if the display is in telephone mode. To activate them, press the MODE button until the telephone is displayed on the screen.
An accident area which does not concern me is displayed on the screen.
T h e a c c i d e n t a r e a s a r e d i s p l a y e d n e a r a p o i n t d e fi n e d o n t h e m a p a n d i n relation to a direction of travel. The alert may be triggered when travelling under a road or near a road which has a speed camera.