2009.5 Citroen C CROSSER DAG light
[x] Cancel search: lightPage 19 of 230
I
I N S T R U M E N T S a n d C O N T R O L S
22
Warning light is on Cause Actions/Observations
Diesel
preheating Fixed This comes on when the
ignition switch is in the
ON position. Wait until this switches off before starting.
The duration for which this is lit is determined
by the exterior climatic conditions.
Handbrake/ B r a k e fl u i d level Fixed This comes on for a few
seconds when the ignition
is turned to "ON" then
switches off.
It is accompanied by a message on the
instrument panel display.
The handbrake is applied
or has not been released
fully. It is accompanied by a message on the
instrument panel display. Release the
handbrake to switch off the warning light.
T h e b r a k e fl u i d l e v e l i s
too low. t is accompanied by a message on the
i n s t r u m e n t p a n e l d i s p l a y . T o p u p w i t h b r a k e fl u i d
and contact a CITROËN dealer.
Emission
control system Fixed or
fl a s h i n g T h i s c o m e s o n o r fl a s h e s
if the system fails. Consult a CITROËN dealer.
It should switch off a few seconds after starting
the engine.
Battery charge Fixed This comes on if a
charging circuit fault
occurs. It should switch off when the engine is started.
It is accompanied by a message on the
instrument panel display. Check the battery
terminals (refer to the "Battery" section).
Page 20 of 230
I
I N S T R U M E N T S a n d C O N T R O L S
23
Warning light is on Cause Actions/Observations
Driver's
seat belt not fastened Fixed The driver has not
fastened or has
unfastened his seat belt. This is accompanied by a message on the
instrument panel display.
Fasten the driver's seat belt.
ABS Fixed This comes on if an
anti-lock braking system
failure occurs. It is accompanied by a message on the
instrument panel display. The vehicle retains
conventional braking without assistance but
you are advised to stop. Have it checked by a
CITROËN dealer.
Air bags and
pretensioners Fixed This comes on for a few
seconds when the ignition
is turned to "ON" then
switches off.
It should switch off when the engine is started.
If it does not switch off, contact a CITROËN
dealer.
This comes on if an air
bag or pretensioner
failure occurs. It is accompanied by a message on the
instrument panel display. Have the system
checked by a CITROËN dealer without delay.
Dynamic
stability control system (ASC) Fixed This comes on if the
dynamic stability control
system fails. It is accompanied by a message on the
instrument panel screen. Have the system
checked by a CITROËN dealer without delay.
Directional lighting off
(AFS OFF) Fixed
This comes on when the
mode is not active. Press the "AFS OFF" button to activate/
deactivate the mode.
Flashing T h i s fl a s h e s i f t h e
systems fails. Consult a CITROËN dealer.
Page 21 of 230
I
I N S T R U M E N T S a n d C O N T R O L S
24
Each time the engine is started: a series of warning lights and/or messages come on applying a checking self test. They
switch off after a few seconds. Engine running: the warning light or the message becomes a warning if it remains on continu -
o u s l y o r fl a s h e s . T h i s i n i t i a l w a r n i n g m a y b e a c c o m p a n i e d b y a n a u d i b l e s i g n a l a n d a m e s s a g e o n t h e d i s p l a y . D o n o t i g n o r e
these warnings.
The messages displayed may vary between the type 1 instrument pan el and the type 2 instrument panel.
W h e n t h e c a u s e o f t h e a p p e a r a n c e o f t h e w a r n i n g l i g h t o r w a r n i n g m e s s a g e h a s b e e n r e c t i fi e d , t h e w a r n i n g d i s a p p e a r s f r o m
t h e d i s p l a y a u t o m a t i c a l l y . I f t h e c a u s e o f t h e w a r n i n g i s n o t r e c t i fi e d , y o u c a n r e t u r n t o t h e p r e v i o u s s c r e e n a t a n y t i m e b y
pressing the INFO button on the fascia.
The symbol "!" is displayed.
To return to the previous screen (with the "!" symbol), you must press the INFO button several times.
Warning messages (ignition at "OFF")
You can shut down the warning messages which show these symbol s in order to move on to the next screen.
To do this, press the INFO button according to the symbol displayed.
Press b r i e fl y . Press and hold .
S y m b o l s w h i c h a p p e a r i n t h e t o p r i g h t c o r n e r o f t h e d i s p l a y .
Message is on Cause Solution - action Observations
K e y i n
ignition Fixed The driver's door is open
and you have forgotten
to remove the key from
the ignition. Turn the ignition switch
to the LOCK position
and remove the key. Only if the engine has
been started.
An intermittent audible
signal is heard.
L i g h t s l e f t
on Fixed You have forgotten to
switch off your lights. Switch off your lights by
placing the stalk at OFF. An intermittent audible
signal is heard.
Page 22 of 230
I
I N S T R U M E N T S a n d C O N T R O L S
25
Warning messages (ignition at "ON")
Message is on Cause Solution - action Observations
ABS Fixed Anti-lock braking system
(ABS) fault. Consult a CITROËN
dealer. The vehicle retains
conventional braking
without assistance
but you are advised
to stop.
Braking system Fixed Associated warning
lamp.
The level of brake
fl u i d i n t h e r e s e r v o i r
is too low.
Stop and top up, otherwise
contact a CITROËN dealer.
If the message
remains on after
topping up, contact
a CITROËN dealer.
Associated warning
lamp.
Braking system fault. Consult a CITROËN
dealer.
It is essential to
s t o p .
Handbrake on Fixed You have moved off with
the handbrake still applied. Release the handbrake.
Coolant
temperature Flashing
High engine temperature. If the message
fl a s h e s ,
wait for the engine to cool
before topping up the level,
if necessary.
It is essential to
s t o p y o u r v e h i c l e
i n a s a f e p l a c e .
Flashing If the message
fl a s h e s and the
s e r v i c e w a r n i n g
light comes on ,
contact a CITROËN
dealer without delay.
Seat belt Fixed The driver has not fastened
or has unfastened his seat
belt. Fasten your seat belt. An intermittent
audible signal is
heard above 5 mph
(8 km/h).
Page 39 of 230
I
I N S T R U M E N T S a n d C O N T R O L S
40
COLOUR DISPLAY
This permits displaying of the following
main menus: On the control panel, press button
B
(SET) to access the "Settings" screen
and select:
- " D i s p l a y D e a c t i v a t e d " to switch off
the display,
- "Sound control" for the sound dis-
tribution or volume, the type of music
a n d t h e s o u n d fi e l d ( s u r r o u n d ) ,
- "Picture control" to set the colour,
the intensity, the brightness, the
contrast and the level of black,
- " S y s t e m " to change the time zone,
the language, the units and other
settings,
- "Wide Screen" to change the size
of the DVD picture to 4/3 format,
wide screen mode, centred wide
screen mode or enlargement,
- " E q u i p m e n t " t o s e t c e r t a i n e q u i p m e n t
offered in the vehicle,
- "Col Contrast" to select the con-
trast of the display in relation to the
exterior light (Day, Night or Auto),
- " T P s t a n d b y " to activate or deacti-
v a t e t h e t r a f fi c i n f o r m a t i o n .
"Audio-video" menu
"Navigation-guidance" menu
On the control panel, press button A
(MODE) to access the "AV mode"
screen and select:
- the radio (FM, MW, LW),
- the CD (audio, MP3 or WMA),
- the Music Server,
- the DVD. "Settings" menu
On the control panel, press button C
(MENU) to access the "Menu" screen
and select:
- "Address/Junction" to search for
a location using the address or the
name of the street,
- "POI name" to search for a location
using the name of a point of interest
(POI),
- "Advanced search" to search for a
location using an advanced search
based on a POI,
- "20 Previous" to search for a loca-
tion using one of the 20 previous
destinations,
- "Address book" to search for a lo-
cation using a stored address,
- "Return to the initial screen" to
enter a return home,
- "Navigation settings" to set func-
tions linked with the navigation,
- "Navigation tools" to access the
basic information or a pre-set demon-
stration.
The "CD" and "DVD" buttons are ac-
tive if you insert a CD or DVD in the
player.
Page 42 of 230
I
I N S T R U M E N T S a n d C O N T R O L S
43
LIGHTING RHEOSTAT
With the lights on or off, press the button
to change the intensity of the lighting of
the instruments and controls in "day" or
"night" mode.
When the lighting reaches the maxi-
mum setting, press again to change to
the minimum setting.
W h e n t h e l i g h t i n g r e a c h e s t h e r e q u i r e d
intensity, release the button.
The setting is saved when the ignition
switch is turned to OFF. An audible signal is heard and the
intensity of the lighting increases
each time the button is pressed.
System for manual adjustment of the
brightness of the instruments and con-
trols in relation to the exterior bright-
ness.
Page 47 of 230
II
C O M F O R T
48
Air conditioning On/Off (5)
Press button 5 to activate the air
c o n d i t i o n i n g .
T h e i n d i c a t o r l i g h t c o m e s o n .
Intake of exterior air/
Recirculation of interior air (4)
T h i s f u n c t i o n i n s u l a t e s t h e p a s s e n g e r
c o m p a r t m e n t f r o m e x t e r i o r o d o u r s a n d
s m o k e .
Press button 4 to select the air intake
m o d e .
When the indicator light on button 4 is off,
t h e e x t e r i o r a i r i n t a k e f u n c t i o n i s a c t i v a t e d .
When the indicator light on button 4 is
on, the intake of exterior air is deactivat-
ed and the system is in air recirculation
m o d e .
D o n o t d r i v e f o r l o n g p e r i o d s i n i n t e -
r i o r a i r r e c i r c u l a t i o n m o d e , e x c e p t i n
t r u l y e x c e p t i o n a l a t m o s p h e r i c c o n d i -
t i o n s . Personalisation of the Exterior
air intake/Interior air recirculation
function
This function is controlled automati-
c a l l y . H o w e v e r , y o u c a n d e a c t i v a t e i t s
automatic control if you wish to change
t h e a i r i n t a k e m o d e a t a n y t i m e .
Personalisation of the Air
Conditioning On/Off function
This function is controlled automati-
c a l l y . H o w e v e r , y o u c a n d e a c t i v a t e i t s
automatic control if you wish to activate
or deactivate the air conditioning at any
t i m e .
The settings are retained, even after
s w i t c h i n g o f f t h e i g n i t i o n .
Changing the status
Press the Air intake/Interior air recircu-
l a t i o n b u t t o n f o r a t l e a s t 1 0 s e c o n d s .
When the status changes from active to
i n a c t i v e , t h r e e b l e e p s a r e h e a r d a n d t h e
i n d i c a t o r l i g h t fl a s h e s t h r e e t i m e s .
When the status changes from inactive
t o a c t i v e , t w o b l e e p s a r e h e a r d a n d t h e
i n d i c a t o r l i g h t fl a s h e s t h r e e t i m e s .
Automatic control active
If the air distribution adjustment dial and
t h e a i r fl o w a d j u s t m e n t d i a l a r e p l a c e d
i n t h e " A U T O " p o s i t i o n , t h e A i r i n t a k e /
Interior air recirculation function is also
c o n t r o l l e d a u t o m a t i c a l l y .
Automatic control inactive
Even if the air distribution adjustment
d i a l a n d t h e a i r fl o w a d j u s t m e n t d i a l a r e
p l a c e d i n t h e " A U T O " p o s i t i o n , t h e A i r
intake/Interior air recirculation function
i s n o l o n g e r c o n t r o l l e d a u t o m a t i c a l l y .
Changing the status
Press the Air Conditioning On/Off button
f o r a t l e a s t 1 0 s e c o n d s .
When the status changes from active to
i n a c t i v e , t h r e e b l e e p s a r e h e a r d a n d t h e
i n d i c a t o r l i g h t fl a s h e s t h r e e t i m e s .
When the status changes from inactive
t o a c t i v e , t w o b l e e p s a r e h e a r d a n d t h e
i n d i c a t o r l i g h t fl a s h e s t h r e e t i m e s .
Automatic control active
If the air distribution adjustment dial and
t h e a i r fl o w a d j u s t m e n t d i a l a r e p l a c e d
i n t h e " A U T O " p o s i t i o n , o r i f t h e t e m p e r -
ature control dial is set to the minimum
t e m p e r a t u r e , t h e a i r c o n d i t i o n i n g s y s -
t e m i s c o n t r o l l e d a u t o m a t i c a l l y .
Automatic control inactive
The air conditioning system is no longer
c o n t r o l l e d a u t o m a t i c a l l y .
Page 48 of 230
II
C O M F O R T
49
W i n d o w s a n d w i n d s c r e e n d e - i c i n g
D e - i c i n g
1. Press button A to select "exterior air
i n t a k e " . T h e i n d i c a t o r l i g h t o n t h i s
b u t t o n i s s w i t c h e d o f f .
2. Place the air distribution dial in the
"windscreen, side windows and
f o o t w e l l s " p o s i t i o n .
3. S e l e c t t h e a i r fl o w r e q u i r e d .
4. S e l e c t t h e t e m p e r a t u r e r e q u i r e d .
5. Press the "air conditioning on/off"
button B to activate the air condition-
i n g . T h e i n d i c a t o r l i g h t o n t h i s b u t t o n
c o m e s o n . R a p i d d e - i c i n g
1. Place the air distribution dial in the
" w i n d s c r e e n a n d s i d e w i n d o w s " p o -
s i t i o n .
2. S e l e c t t h e m a x i m u m a i r fl o w .
3. S e l e c t t h e m a x i m u m t e m p e r a t u r e .
R e a r s c r e e n d e - i c i n g ( 6 )
W i t h t h e e n g i n e r u n n i n g , p r e s s b u t t o n 6
to activate the de-icing of the rear screen
a n d e x t e r i o r m i r r o r s .
The indicator light on the button comes
o n w h i l e t h e d e - i c i n g i s i n o p e r a t i o n .
The de-icing switches off automatically
t o p r e v e n t a n e x c e s s i v e c o n s u m p t i o n o f
c u r r e n t .
T h e o p e r a t i o n o f t h e d e - i c i n g c a n b e
s t o p p e d b e f o r e i t i s s w i t c h e d o f f a u t o -
m a t i c a l l y b y p r e s s i n g t h e b u t t o n a g a i n .
It is advisable to switch off the rear
s c r e e n d e - i c i n g a s s o o n a s p o s s i -
b l e a s l o w e r c u r r e n t c o n s u m p t i o n
r e d u c e s t h e f u e l c o n s u m p t i o n .