TABLE OF CONTENTS
SAFETY INFORMATION.....................1-1
Safe riding .........................................1-1
Protective apparel .............................1-2
Modifications .....................................1-2
Loading and accessories ..................1-2
Gasoline and exhaust gas ................1-4
DESCRIPTION .....................................2-1
Left view ............................................2-1
Right view .........................................2-2
Controls and instruments ..................2-3
INSTRUMENT AND CONTROL
FUNCTIONS ........................................3-1
Immobilizer system ...........................3-1
Main switch/steering lock ..................3-2
Indicator and warning lights ..............3-3
Multi-function display ........................3-5
Tachometer .......................................3-6
Tripmeter and tachometer modes .....3-6
Clock mode .......................................3-7
Fuel meter .........................................3-7
Self-diagnosis devices ......................3-7
Anti-theft alarm (optional) .................3-8
Handlebar switches ...........................3-9
Clutch lever .....................................3-10
Shift pedal .......................................3-10
Brake lever ......................................3-11
Brake pedal .....................................3-11 Fuel tank cap ..................................3-11
Fuel .................................................3-12
Fuel tank breather hose ..................3-13
Catalytic converter ..........................3-13
Seat .................................................3-14
Adjusting the front fork ....................3-15
Adjusting the shock absorber
assembly ..................................3-16
Sidestand ........................................3-17
Ignition circuit cut-off system ..........3-17
PRE-OPERATION CHECKS ...............4-1
Pre-operation check list ....................4-2
OPERATION AND IMPORTANT
RIDING POINTS ..................................5-1
Starting the engine............................5-1
Shifting ..............................................5-2
Tips for reducing fuel consumption ...5-3
Engine break-in .................................5-3
Parking ..............................................5-4
PERIODIC MAINTENANCE
AND MINOR REPAIR .........................6-1
Owner’s tool kit .................................6-1
Periodic maintenance and lubrication chart..........................6-2
Removing and installing the cowling and panels..................................6-8 Checking the spark plug ...................6-8
Engine oil and oil filter element.........6-9
Coolant ............................................6-12
Replacing the air filter element
and cleaning the check hose ..... 6-14
Checking the engine idling speed ...6-15
Checking the throttle cable free play ...................................6-16
Valve clearance ...............................6-16
Tires ................................................6-16
Spoke wheels..................................6-19
Adjusting the clutch lever free play ...................................6-20
Checking the front and rear brake pads ...............................6-21
Checking the brake fluid level .........6-22
Changing the brake fluid .................6-23
Drive chain slack .............................6-23
Cleaning and lubricating the drive chain ................................6-25
Checking and lubricating the cables .......................................6-25
Checking and lubricating the throttle grip and cable ..............6-26
Checking and lubricating the brake and clutch levers ............6-26
Lubricating the brake pedal ............6-27
Checking and lubricating the sidestand ..................................6-27
XT660Z 01-03 ING 10-03-2008 16:11 Pagina 6
DESCRIPTION
EAU10430
Controls and instruments
1. Clutch lever (page 3-10)
2. Left handlebar switches (page 3-9)
3. Multi-function meter unit and warning lights (page 3-3, 3-5)
4. Right handlebar switches (page 3-9)
5. Throttle grip (page 6-16)6. Brake lever (page 3-11)
7. Engine oil filler cap/dipstick (page 6-9)
8. Fuel tank cap (page 3-11)
9. Main switch and steering lock (page 3-2)
2-3
1
2
3
4
5
6
7
8
9
10
XT660Z 01-03 ING 10-03-2008 16:11 Pagina 14
1
2
3
4
5
6
7
8
9
10
INSTRUMENT AND CONTROL FUNCTIONS
3-3
To unlock the steering
1. Push
2. Turn
Push the key in, and then turn it to
“OFF” while still pushing it.
EWA10060
WARNING0
Never turn the key to “OFF” or
“LOCK” while the vehicle is mov-
ing, otherwise the electrical sys-
tems will be switched off, which
may result in loss of control or an
accident. Make sure that the vehi-
cle is stopped before turning the
key to “OFF” or “LOCK”.
EAU10941
F(Parking)
The steering is locked, and the tail-
light, license plate light and auxiliary
lights are on. The hazard lights and
turn signal lights can be turned on, but
all other electrical systems are off. The
key can be removed.
The steering must be locked before
the key can be turned to “ F”.
ECA11020CAUTION:
Do not use the parking position for
an extended length of time, other-
wise the battery may discharge.
EAU11003
Indicator and warning lights
1. Immobilizer system indicator light “ ”
2. Neutral indicator light “ N”
3. Turn signal indicator light “ y”
4. High beam indicator light “ 1”
5. Engine trouble warning light “ U”
6. Coolant temperature warning light “ u”
EAUB1510
Turn signal indicator light “ y”
This indicator light flashes when the
turn signal switch is pushed to the left
or right.
The electrical circuit of the turn signal
indicator light can be checked by turn-
ing the key to "ON".
If the indicator light does not come on
for a few seconds, then go off, have a
Yamaha dealer check the electrical cir-
cuit.
XT660Z 01-03 ING 10-03-2008 16:11 Pagina 3-3
1
2
3
4
5
6
7
8
9
10
OPERATION AND IMPORTANT RIDING POINTS
EAU15950
EWA10270
WARNING0
●Become thoroughly familiar
with all operating controls and
their functions before riding.
Consult a Yamaha dealer re-
garding any control or function
that you do not thoroughly un-
derstand.
●Never start the engine or oper-
ate it in a closed area for any
length of time. Exhaust fumes
are poisonous, and inhaling
them can cause loss of con-
sciousness and death within a
short time. Always make sure
that there is adequate ventila-
tion.
●Before starting out, make sure
that the sidestand is up. If the
sidestand is not raised com-
pletely, it could contact the
ground and distract the opera-
tor, resulting in a possible loss
of control.
EAUB1570
Starting the engine
In order for the ignition circuit cut-off
system to enable starting, one of the
following conditions must be met:
●The transmission is in the neutral
position.
●The transmission is in gear with
the clutch lever pulled and the
sidestand up.
EWA10290
WARNING0
●Before starting the engine,
check the function of the igni-
tion circuit cut-off system ac-
cording to the procedure de-
scribed on page 3-18.
●Never ride with the sidestand
down.
1. Turn the key to “ON” and make sure that the engine stop switch is
set to “
I”.
ECAB0070CAUTION:
The following warning lights and in-
dicator lights should come on for a
few seconds, then go off.
●Neutral indicator light
●Turn signal indicator light
●High beam indicator light
●Engine trouble warning light
●Coolant temperature warning
light
●Immobilizer system indicator
light
If a warning or indicator light does
not go off, see page 3-3 for the cor-
responding warning and indicator
light circuit check.
2. Shift the transmission into the neutral position.
NOTE:
When the transmission is in the neu-
tral position, the neutral indicator light
should be on, otherwise have a Yama-
ha dealer check the electrical circuit.
5-1
XT660Z 04-06 ING 11-03-2008 8:30 Pagina 5-1
1
2
3
4
5
6
7
8
9
10
PERIODIC MAINTENANCE AND MINOR REPAIR
6-33
EAUB1580
Replacing a headlight bulb
1. Headlight bulb cover
1. Headlight coupler
2. Headlight bulb holder
3. Headlight bulb
EWA10790
WARNING0
Headlight bulbs get very hot. There-
fore, keep flammable products
away from a lit headlight bulb, and
do not touch the bulb until it has
cooled down.3. Place a new headlight bulb into position, and then secure it with
the bulb holder.
1. Do not touch this area
1. Headlight bulb holder
2. Headlight bulb
This model is equipped with quartz
bulb headlights. If a headlight bulb
burns out, replace it as follows.1. Remove the headlight bulb cover, and then disconnect the headlight
coupler.
2. Unhook the headlight bulb holder, and then remove the defective
bulb.
XT660Z 04-06 ING 11-03-2008 8:31 Pagina 6-33
INDEX
1
2
3
4
5
6
7
8
9
10
Ignition circuit cut-off system............3-17 Checking operation procedure......3-18
Immobilizer system ............................3-1
Immobilizer system indicator light ......3-4
Indicator and warning lights ...............3-3 Coolant temperature warning
light .................................................3-4
Engine trouble warning light ...........3-4
High beam indicator light ................3-4
Immobilizer system indicator light...3-4
Neutral indicator light ......................3-4
Turn signal indicator light ................3-3
Instruments ........................................2-3
Instrument and control functions........3-1
K Key identification number ...................9-1
Keys ...................................................3-1
L License plate light bulb, replacing ....6-35
Lubricating the brake and clutch levers ..................................6-26
Lubricating the brake pedal..............6-27
Lubricating the cables ......................6-25
Lubricating the drive chain ...............6-25
Lubricating the sidestand .................6-27
Lubricating the throttle grip and cable .............................................6-26
Lubricating the swingarm pivots.......6-28
M Main switch/steering lock ...................3-2 Model label .........................................9-2
Multi-function display..........................3-5
Clock mode .....................................3-7
Self-diagnosis devices ....................3-7
Tachometer .....................................3-6
Tripmeter and tachometer modes ...3-6
N Neutral indicator light .........................3-4
O Oil filter element ...............................6-10
Operation and important riding points ..............................................5-1
Owner’s tool kit...................................6-1
P Panels, removing and installing .........6-6
Parking ...............................................5-4
Pass switch ........................................3-9
Periodic maintenance and lubrication chart ..............................6-2
Periodic maintenance and minor repair...............................................6-1
Pre-operation check list......................4-2
Pre-operation checks .........................4-1
R Rear suspension, lubricating............6-27
Rear wheel .......................................6-38 Installing........................................6-39
Removing......................................6-38
Record the identification numbers .....9-1 S
Safety information ..............................1-1
Seat ..................................................3-14
Self-diagnosis devices .......................3-7
Shift pedal ........................................3-10
Shifting ...............................................5-2
Shock absorber assembly (adjusting) .....................................3-16
Sidestand .........................................3-17
Sidestand, checking and lubricating .....................................6-27
Sidestand switch, checking ..............3-18
Spark plug, checking..........................6-8
Specifications .....................................8-1
Spoke wheels ...................................6-19
Start switch ........................................3-9
Starting the engine.............................5-1
Steering, checking............................6-29
Steering lock ......................................3-2
Storage...............................................7-3
Supporting the motorcycle ...............6-36
Swingarm, lubricating the pivots ......6-28
T Tachometer ........................................3-6
Tail/brake light ..................................6-34
Throttle cable free play, checking.....6-16
Throttle grip and cable, checking and lubricating ..............................6-26
Tips for reducing fuel consumption ....5-3
Tires .................................................6-16 Air pressure ..................................6-16
XT660Z 07-10 ING 11-03-2008 8:33 Pagina 2
1
2
3
4
5
6
7
8
9
10
INDEX
Tire information .............................6-18
Tire inspection ..............................6-18
Tool kit ................................................6-1
Tripmeter and tachometer modes ......3-6
Troubleshooting ................................6-39 Troubleshooting charts .................6-40
Engine overheating .......................6-41
Turn signal indicator light ...................3-3
Turn signal light bulb, replacing........6-34
Turn signal switch...............................3-9
V Valve clearance ................................6-16
Vehicle identification number .............9-1
W Warning lights ....................................3-3
Wheel bearings, checking ................6-29
Wheels, spoke..................................6-19
XT660Z 07-10 ING 11-03-2008 8:33 Pagina 3