Page 16 of 490

EVU00050
1 -CONTENTS
LOCATION OF THE WARNING AND
SPECIFICATION LABELS ....................... 1-1
SAFETY INFORMATION ......................... 2-1
DESCRIPTION ........................................ 3-1
INSTRUMENT AND CONTROL
FUNCTIONS ............................................ 4-1
Main switch........................................... 4-1
Indicator and warning lights.................. 4-3
Multi-function meter unit ..................... 4-13
Switches ............................................. 4-25
Accelerator pedal ............................... 4-29
Brake pedal ........................................ 4-31
Parking brake lever ............................ 4-31
Drive select lever ................................ 4-33
Fuel tank cap ...................................... 4-33
Doors .................................................. 4-35
Seats .................................................. 4-37
Seat belts ........................................... 4-39
Glove compartment ............................ 4-39
Cup holders ........................................ 4-41
Cargo bed........................................... 4-43
1234
Adjusting the front shock absorber
assemblies ....................................... 4-47
Adjusting the rear shock absorber
assemblies ....................................... 4-61
Trailer hitch bracket and receiver....... 4-73
Auxiliary DC jack ................................ 4-73
FOR YOUR SAFETY –
PRE-OPERATION CHECKS ................... 5-1
Front and rear brakes .......................... 5-7
Fuel .................................................... 5-11
Engine oil ........................................... 5-19
Coolant............................................... 5-21
Final gear oil ...................................... 5-23
Differential gear oil ............................. 5-23
Accelerator pedal ............................... 5-25
Seat belts ........................................... 5-25
Steering.............................................. 5-27
Fittings and fasteners......................... 5-27
Lights ................................................. 5-27
Switches............................................. 5-29
Control cables .................................... 5-29
Tires ................................................... 5-29
5
EE.book Page 1 Wednesday, November 7, 2007 2:40 PM
Page 32 of 490
1-5
78Improper tire pressure or overloading the Rhino may
cause severe injury or death from loss of control or
rollover.
OPERATING TIRE PRESSURE: Set with tires cold.
RECOMMENDED:
FRONT: 70kPa, (.70kgf/cm
2), 10psi
REAR: 98kPa, (.98kgf/cm2), 14psi
MINIMUM: FRONT: 63kPa, (.63kgf/cm2), 9psi
REAR: 91kPa, (.91kgf/cm2), 13psi
Never set or allow tire pressure to be below the
minimum. Tire may dislodge from rim.
Gross Vehicle Weight Rating: 907 kg (2000 lb)
maximum including vehicle, weight of operator,
passenger, accessories, cargo, and (if applicable)
trailer tongue weight.
YAMAHA 5B4-F1696-00
WARNING
!
EE.book Page 5 Wednesday, November 7, 2007 2:40 PM
Page 46 of 490
2-7
Prepare your load or trailer
Carrying loads, towing a trailer, or pulling objects
can affect handling, stability, and risk of overturn or
other accidents.
Read Chapter 6 before loading, towing, or
pulling objects.
Do not overload the vehicle or trailer. Refer
to label in cargo bed for cargo bed load limit.
Refer to label next to hitch for tongue weight
and trailer load limits.
Keep weight in the cargo bed centered side
to side, and as low and as far forward as
possible.
Secure cargo so that it will not shift – a loose
load could change handling unexpectedly or
be thrown forward and strike occupants.
EE.book Page 7 Wednesday, November 7, 2007 2:40 PM
Page 54 of 490
2-15
When loaded with cargo or towing a trailer:
Reduce speed, operate in low gear only,
and allow more room to stop.
Avoid hills and rough terrain. Use extreme
caution when towing or carrying a load on in-
clines.
Load trailer properly and use extra care
when towing or pulling.
Do not tow or pull objects from any part of the
vehicle other than the trailer hitch bracket or
winch (if installed).
EE.book Page 15 Wednesday, November 7, 2007 2:40 PM
Page 142 of 490
4-73 1. Trailer hitch bracket 2. Receiver
1. Fixation de l’attelage de remorque
2. Support de fixation d’attelage
1. Soporte para gancho de remolque 2. Receptor
2 1
1. Auxiliary DC jack cap
1. Capuchon de la prise pour accessoire
1. Tapa de la toma auxiliar de corriente continua
EVU00370
Trailer hitch bracket and receiver
This vehicle is equipped with a trailer hitch bracket
and a 5 cm (2 in) receiver for a standard trailer
hitch. Trailer towing equipment can be obtained at
a Yamaha dealer. (See pages 6-25–6-33 for pre-
caution information.)
EVU00380
Auxiliary DC jack
The auxiliary DC jack is located at the right side of
the front panel. The auxiliary DC jack can be used
for suitable work lights, radios, etc. The auxiliary
DC jack should only be used when the engine is
running.
1. Set the light switch to “OFF”.
2. Start the engine. (See pages 6-7–6-9.)
EE.book Page 73 Wednesday, November 7, 2007 2:40 PM
Page 204 of 490
6-25
EVU00630
Loading
Take extra precautions when driving with a load or
trailer. Follow these instructions and always use
common sense and good judgment when carrying
cargo or towing a trailer.
Prepare your load or trailer
WARNING
Improper loading or towing can increase the
risk of loss of control, an overturn, or other ac-
cident:
Do not exceed the Maximum Loading Lim-
its for the vehicle (see box or vehicle label-
ing).
Keep weight in the cargo bed centered
side to side, and as low and as far forward
as possible. Top-heavy loads increase the
risk of overturn. Be sure cargo is secured –
a loose load could change handling unex-
pectedly or strike occupants.
EE.book Page 25 Wednesday, November 7, 2007 2:40 PM
Page 206 of 490
6-27
Do not exceed the maximum tongue
weight.
Make sure the load does not interfere with
your control or ability to see where you are
going.
Tie down cargo in the trailer securely.
Make sure cargo in the trailer cannot move
around. A shifting load can cause an acci-
dent.
Use the hooks equipped on the cargo bed to tie
down loads.
Choose a trailer hitch drawbar designed for use
with a 5 cm (2 in) receiver. (See page 4-73 for
more information.)
EE.book Page 27 Wednesday, November 7, 2007 2:40 PM
Page 208 of 490
6-29
You can measure tongue weight with a bathroom
scale. Put the tongue of the loaded trailer on the
scale with the tongue at hitch height. Adjust the
load in the trailer, if necessary, to reduce the
weight on hitch. If you are carrying cargo and tow-
ing a trailer, include the tongue weight in the max-
imum vehicle load limit.
MAXIMUM LOADING LIMIT
Vehicle loading limit (total weight of
cargo, operator, passenger and
accessories and tongue weight):
359 kg (791 lb)
Cargo bed: 181 kg (400 lb)
Trailer hitch:
Pulling load (total weight of trailer and
cargo): 550 kg (1,212 lb)
Tongue weight (vertical weight on trailer
hitch point): 50 kg (110 lb)
EE.book Page 29 Wednesday, November 7, 2007 2:40 PM