2008 TOYOTA YARIS HATCHBACK Owners Manual

179
3-2. Using the audio system
3
Interior features
Using the radio
\
Ty p e A
Ty p e B
Vol um e
Seeking the frequency AM/FM mode buttons
Scanning for receivable
stations Power
Adjusting the frequency
Station selector
Vo lu m e
Scanning for receivable stations Station selector
Seeking the frequency Adjusting the
frequency
AM/FM mode buttonsPower

180 3-2. Using the audio system
Setting station presetsSearch for desired stations by turning or or
pressing “
∧” or “∨” on or .
Press and hold the button (from or
to or
) that the station is to be set to until you hear a beep.
Scanning radio stations n Scanning the preset radio stations
Press and hold or until you hear a beep.
Preset stations will be played for 5 seconds each.
When the desired station is reached, press the button once
again.
n Scanning all radio stations within range
Press or .
All stations with reception will be played for 5 seconds each.
When the desired station is reached, press the button once
again.

181
3-2. Using the audio system
3
Interior features
n
When the battery is disconnected
Stations presets are erased.
n Reception sensitivity
lMaintaining perfect radio reception at all times is difficult due to the con-
tinually changing position of the antenna, differences in signal strength
and surrounding objects, such as trains, transmitters, etc.
l The radio antenna is mounted on the rear roof. The antenna can be
removed from the base by turning it.
NOTICE
nTo prevent damage, remove the antenna in the following cases.
lThe antenna will touch the ceiling of a garage.
l A cover will be put on the vehicle.

182
3-2. Using the audio system
Using the cassette player
Selecting a trackn Skip a number of tracks at a time.
Press “ ∧” on .
Press “ ∧” until the number you want to skip appears.
9 tracks can be skipped at a time.
n Rewind a number of tracks at a time.
Press “ ∨” on .
Press “ ∨” until the number you want to rewind appears.
9 tracks can be rewound at a time.
Note that the number includes the current track.
Type A (with external ca ssette tape player only)
Power Volume
Repeat play Playback
Noise reduction
Change playback direction
Fast-forward
Reverse
Track selection

183
3-2. Using the audio system
3
Interior features
Using Dolby® B Noise Reduction
Press .
Reduces the level of noise for tapes recorded with Dolby
® B NR only.
Dolby noise reduction is manufactured under license from Dolby Labora-
tories Licensing Corporation. DOLBY and the double-D symbol are
registered trademarks of Dolby Laboratories.
n Canceling noise reduction
Press ( ) again.
n Canceling repeat playback
Press
(RPT) again.
n Canceling reverse and fast-forward
Press ( ) or ( ) again.
n Auto-reverse feature
After the cassette player reaches the end of a tape, it automatically reverses
and begins to play the other side, regardless of whether the cassette was
playing or fast forwarding.
n When the cassette player does not operate correctly due to the cas-
sette recording conditions
Forwarding to the beginning of a track and repeat play may not be possib\
le
in the following situations:
lThe interval between tracks is less than 3 seconds.
l When there is noise between 2 tracks.
l The beginning and end of subsequent tracks are not clearly defined.

184 3-2. Using the audio system
nCleaning the cassette player
Cassette player components (heads, capstan, pinch rollers) should be
cleaned at least once a month using a cleaning tape to remove dirt and dust
that can easily build up.
n Using long playing cassette tapes
Avoid using tapes with a length of more than 90 minutes, as the tape used is
very thin and may become tangled in the cassette player.
NOTICE
nCassette tapes that cannot be used
Do not use a cassette tape if it has been damaged or tangled or if its label is
peeling off. Such tapes may affect playing speed and may also get stuck in
the player.
n Cassette player precautions
lStore cassette tapes away from direct sunlight.
l Do not insert anything other than cassette tapes into the cassette player.
l Do not apply oil to the cassette player.

185
3-2. Using the audio system
3
Interior features
Using the CD player
Type A (with external CD player or external CD changer only)
Ty p e B
Vo l u m e
Power
CD selection
(with external CD changer only)
Reverse
Repeat play Playback
Fast-forward
Track selectionRandom playback
Search playback
Vol u m e
Random playback
Track selection Repeat play
Playback
Power
CD eject
Display text message
CD selection
(with external CD changer only)
Search playback
Reverse
Fast-forward

186 3-2. Using the audio system
Loading a CD (Type B only)Insert a CD.
Ejecting a CD (Type B only)Press and remove the CD.
Selecting and scanning a trackn Selecting a track
Press “
∧” to move up or “ ∨” to move down using or
until the desired track number is displayed.
n Scanning tracks
Press or .
The first 10 seconds of each track will be played.
Press the switch again when the desired track is reached.
Fast-forwarding and reversing tracks
To fast-forward or reverse.
Type A: Press and hold ( ) or ( ).
Type B: Press and hold ( ) or ( ).
Selecting a CD (with exte rnal CD changer only)
n Selecting the desired CD
Type A: Press ( ∨) or (
∧).
Type B: Press ( ∨) or (
∧).