2008 TOYOTA SIENNA audio

08 SIENNA_U (L/O 0801)
339
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
INFORMATION
A shortcut to each of the following
functions is available. Push the off
hook switch and talk switch, and say
one of the following:
Phone book add entry
Phone book change name
Phone book delete entry
Phone book delete speed dial
Phone book list names
Phone book set speed dial
The following can be performed:
Dial
Delete
Store
To enter the redial 1. Push the off −hook switch to turn the
hands −free system on.
2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Redial” is displayed and push the
knob.
“Redial. Most recent outgoing call was
XXXX” is heard and outgoing history is
displayed.
“Please push the off −hook switch to dial.
Otherwise, push the talk switch and say
dial, previous, go back, store, or delete.”
is heard. Dial
Turn the “AUDIO CONTROL” knob until
the number that you want to dial is dis-
played and push the knob. After that, do
the one of the following:
Push the off
−hook switch.
Push the talk switch and say “dial”.
Turn the “AUDIO CONTROL” knob until
“Dial” is displayed and push the knob.
Delete
1. Turn the “AUDIO CONTROL” knob until the dial number that you want to delete
is displayed and push the knob.
2. Push the talk switch and say “Delete”, or turn the “AUDIO CONTROL” knob
until “Delete” is displayed and push the
knob.
“Delete. Push the talk switch and say con-
firm. Otherwise, say go back” is heard. 3. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Confirm” is displayed and push the
knob.
“Deleted.” is heard.
—Redial

08 SIENNA_U (L/O 0801)
340
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
Store1. Turn the “AUDIO CONTROL” knob until the dial number that you want to regis-
ter is displayed and push the knob.
2. Push the talk switch and say “Store”, or turn the “AUDIO CONTROL” knob
until “Store” is displayed and push the
knob.
“Store. Push the talk switch and say con-
firm. Otherwise, say go back.” is heard. 3. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Confirm” is displayed and push the
knob.
Next, input a voice tag.
For further details, see page 332.
The system may not function in the follow-
ing cases:
If there is no outgoing history.
If the phone book is locked.
INFORMATION
Up to five outgoing calls can be
stored in the system.
When five outgoing calls are stored
in memory, the oldest outgoing call
is deleted to make room in memory
for new calls.
Only the latest outgoing call is
stored when the same telephone
number is dialed.
A shortcut to “Redial” is available.
Push the offhook switch and then
push the offhook switch.
The following can be performed:
Dial
Delete
Store
To enter the callback 1. Push the off −hook switch to turn the
hands −free system on.
2. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Callback” is displayed and push the
knob.
“Callback. Most recent incoming call was
XXXX” is heard and incoming history is
displayed.
“Please push the off −hook switch to dial.
Otherwise, push the talk switch and say
dial, previous, go back, store, or delete.”
is heard.
—Callback

08 SIENNA_U (L/O 0801)
341
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
Dial
Turn the “AUDIO CONTROL” knob until
the number that you want to dial is dis-
played and push the knob. After that, do
the one of the following:
Push the off−hook switch.
Push the talk switch and say “Dial”.
Turn the “AUDIO CONTROL” knob until
“Dial” is displayed and push the knob.
Delete
1. Turn the “AUDIO CONTROL” knob until the dial number that you want to delete
is displayed and push the knob.
2. Push the talk switch and say “Delete”, or turn the “AUDIO CONTROL” knob
until “Delete” is displayed and push the
knob.
“Delete. Push the talk switch and say con-
firm. Otherwise, say go back” is heard. 3. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Confirm” is displayed and push the
knob.
“Deleted.” is heard. Store
1. Turn the “AUDIO CONTROL” knob until the dial number that you want to regis-
ter is displayed and push the knob.
2. Push the talk switch and say “Store”, or turn the “AUDIO CONTROL” knob
until “Store” is displayed and push the
knob.
“Store. Push the talk switch and say con-
firm. Otherwise, say go back.” is heard. 3. Follow voice guidance instructions, or turn the “AUDIO CONTROL” knob until
“Confirm” is displayed and push the
knob.
Next, input a voice tag.
For further details, see page 332.
The system may not function in the follow-
ing cases:
If there is no incoming history.
If the phone book is locked.
INFORMATION
Up to five incoming calls can be
stored in the system.
When five incoming calls are stored
in memory, the oldest incoming call
is deleted to make room in memory
for new calls.

08 SIENNA_U (L/O 0801)
342
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
If the cellular phone is not registered, this
system cannot be used. See page 322 for
registering a cellular phone. Make sure
that “BT” is displayed and get the cellular
phone ready to use.
There are 3 ways to make a phone call
with this system.
Speed dial
A phone call can be made with a preset
button in which a phone number is regis-
tered. See page 338 for setting the preset
buttons.
Dial by Name
The system dials the numbers correspond-
ing to the spoken names registered in the
system.
Dial by Number
The system dials to the spoken numbers.
To make a phone call
Push the off −hook switch to turn the
hands −free system on. To speed dial
1. Push the preset button where the de- sired number is set. The name or tele-
phone number is displayed.
2. Push the off −hook switch to dial.
To dial by Name 1. Push the talk switch and say “Dial by name”.
“Dial by name. Please push the talk
switch and say the stored name, or say
list names.” is heard and “Dial by Name”
is displayed.
2. Push the talk switch and say “XXXX”, or turn the “AUDIO CONTROL” knob
until the phone name that you want to
dial is displayed and push the knob. When using a voice command:
“XXXX Push the off
−hook switch to dial.
Otherwise, push the talk switch and say
dial, or go back.” is heard. After that, do
the one of the following:
Push the off −hook switch.
Push the talk switch and say “Dial”.
Turn the “AUDIO CONTROL” knob until
“Dial” is displayed and push the knob.
When using the knob:
It calls the number.
The system may not function in the follow-
ing cases:
If there is no number registered in the
preset button.
If the system does not recognize the
voice command.
—Making a phone call

08 SIENNA_U (L/O 0801)
343
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
INFORMATION
The phone numbers registered in
the phone book can be retrieved.
The system does not recognize that
the voice tag is not registered in
the registered cellular phone. For
details about voice tags, see “To
add entry” on page 332.
A shortcut to “Dial by name” is
available. Push the talk switch and
say “Dial XXX (name you want to
dial)”.
To dial by Number1. Push the talk switch and say “Dial by Number”.
“Dial by number. Please push the talk
switch and say the number.” is heard and
“Dial by Num” is displayed. 2. Push talk switch and say “XXXX”.
“Push the off −hook switch to dial. Other-
wise, push the talk switch and say dial,
go back, or delete.” is heard.
To dial the number, do the one of the
following:
Push the off −hook switch.
Push the talk switch and say “Dial”.
Turn the “AUDIO CONTROL” knob until
“Dial” is displayed and push the knob.
If the number exceeds 24 digits, the sys-
tem may not function properly.
INFORMATION
The system can recognize single
digits from zero to nine, #(pound),
∗ (star), and +(plus). Numbers that
are ten or greater are not recog-
nized.
To speed up input, it is a good idea
to group all digits into a continuous
string. However, you can enter each
digit individually or group digits to-
gether in preferred string lengths.
The display corresponding to each op-
eration appears on the screen as fol-
lows:
Input operation—
You say: “Nine, nine, five”
Voice output: “995 push the offhook
switch to dial. Otherwise, push the
talk switch and say dial, go back, or
delete.”
Display: “995”
You say: “Seven, three, four”
Voice output: “734 push the offhook
switch to dial. Otherwise, push the
talk switch and say dial, go back, or
delete.”

08 SIENNA_U (L/O 0801)
499
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
Waxing your Toyota
Polishing and waxing is recommended
to maintain the original beauty of your
Toyota’s finish.
Apply wax once a month or if the vehicle
surface does not repel water well.1. Always wash and dry the vehicle be- fore you begin waxing, even if you are
using a combined cleaner and wax.
2. Use a good quality polish and wax. If the finish has become extremely weath-
ered, use a car −cleaning polish, fol-
lowed by a separate wax. Carefully fol-
low the manufacturer ’s instructions and
precautions. Be sure to polish and wax
the chrome trim as well as the paint.
Windshield washer nozzles: Make sure
that the nozzles do not become blocked
when waxing. If a nozzle becomes
blocked, contact your Toyota dealer to
have the vehicle serviced.NOTICE
If a nozzle becomes blocked, do not
try to clear it with a pin or other
object. The nozzle will be damaged.
Exterior lights: Do not apply wax on the
surfaces of the lights. Wax may cause
damage to the lenses. If you accidentally
put wax on the light surfaces, wipe or
wash it off. 3. Wax the vehicle again when water does not bead but remains on the sur-
face in large patches.
CAUTION
Vehicles with side airbags and cur-
tain shield airbags:
Be careful not to splash water or
spill liquid on the floor. This may
prevent the side airbag and curtain
shield airbag from activating cor-
rectly, resulting in serious injury.
Do not wash the vehicle floor with
water, or allow water to get onto
the floor when cleaning the vehicle
interior or exterior. Water may get
into audio components or other
electrical components above or un-
der the floor carpet (or mat) and
cause a malfunction; and it may
cause body corrosion.
Cleaning the interior

08 SIENNA_U (L/O 0801)
500
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
Vinyl interior
The vinyl upholstery may be easily
cleaned with a mild soap or detergent
and water.
First vacuum over the upholstery to re-
move loose dirt. Then, using a sponge or
soft cloth, apply the soap solution to the
vinyl. After allowing it to soak in for a few
minutes to loosen the dirt, remove the dirt
and wipe off the soap with a clean damp
cloth. If all the dirt do not come off, re-
peat the procedure. Commercial foaming−
type vinyl cleaners are also available
which work well. Follow the manufacturer ’s
instructions.
NOTICE
Do not use solvent, thinner, gasoline
or window cleaner on the interior.
Carpets
Use a good foamtype shampoo to
clean the carpets.
Begin by vacuuming thoroughly to remove
as much dirt as possible. Several types of
foam cleaners are available; some are in
aerosol can sand others are powders or
liquids which you mix with water to pro-
duce a foam. To shampoo the carpets,
use a sponge or brush to apply the foam.
Rub in overlapping circles.
Do not apply water—the best results are
obtained by keeping the carpet as dry as
possible. Read the shampoo instructions
and follow them closely.
Seat belts
The seat belts may be cleaned with
mild soap and water or with lukewarm
water.
Use a cloth or sponge. As you are clean-
ing, check the belts for excessive wear,
fraying, or cuts.
NOTICE
 Do not use dye or bleach on the
belts—it may weaken them.
 Do not use the belts until they be-
come dry.
Windows
The windows may be cleaned with any
household window cleaner.
NOTICE
When cleaning the inside of the
rear window, be careful not to
scratch or damage the heater wires
or connectors.
 With onglass antenna: When clean-
ing the inside of the rear window,
be careful not to scratch or damage
the printed antenna.
Air conditioning control panel, audio
panel, instrument panel, console panel,
and switches
Use a soft damp cloth for cleaning.
Soak a clean soft cloth in water or luke-
warm water then lightly wipe off dirt.

08 SIENNA_U (L/O 0801)
554
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
Engine compartment
Instrument panel (driver’s side)
Fuses (type A)1. ETCS 10 A: Multiport fuel injection
system/se quential multiport fuel injec-
tion system
2. EFI NO. 1 20 A: Multiport fuel injection
system/se quential multiport fuel injec-
tion system, “EFI NO. 2” fuse
3. HLP RL 15 A: Right−hand headlight
(low beam)
4. DRL 20 A: Daytime running light sys-
tem, “H −LP RH” and “H −LP LH” fuses
5. ALTS 7.5 A: Charging system
6. HLP LL 15 A: Left−hand headlight
(low beam), front fog lights
Instrument panel (passenger’s side)
7. DOOR NO. 2 25 A: Power door lock
system
8. HAZ 15 A: Turn signal lights, emergen-
cy flashers
9. RAD NO. 3 30 A: Audio system
10. A/F 25 A: Multiport fuel injection sys-
tem/sequential multiport fuel injection
system
11. HORN 10 A: Horns
12. EFI NO. 2 10 A: Multiport fuel injection
system/s equential multiport fuel injec-
tion system
Fuses