2008 TOYOTA LAND CRUISER oil level

1
2
3
4
5
6
7
5
52. Steps to take in an
emergency ....................... 449
If a warning light turns on
or a warning sounds... ...... 449
If a warning message is
displayed........................... 460
If you have a flat tire............ 463
If the engine will not start .... 476
If the shift lever cannot be
shifted from P.................... 478
If you lose your keys ........... 479
If you cannot operate
back door opener .............. 480
If the electronic key does
not operate properly.......... 481
If the battery is
discharged ........................ 484
If your vehicle overheats ..... 488
If the vehicle becomes
stuck ................................. 491
61. Specifications.................... 494
Maintenance data (fuel,
oil level, etc.) ..................... 494
Fuel information .................. 504
Tire information ................... 507
62. Customization ................... 519
Customizable features ........ 519
63. Initialization ....................... 523
Items to initialize ................. 523Reporting safety defects for
U.S. owners...................... 526
Abbreviation list ............... 528
Alphabetical index............ 530
What to do if...................... 538
6Vehicle specifications
7For U.S. owners
Index

222
2−5. Driving information
Winter driving tips
Carry out the necessary preparations and inspections before driving
the vehicle in winter. Always drive the vehicle in a manner appropri
ate to the prevailing weather conditions.
nPrewinter preparations
lUse fluids that are appropriate to the prevailing outside tem−
peratures.
Engine oil
Engine coolant
Washer fluid
l
Have a service technician inspect the level and specific grav−
ity of battery electrolyte.
lHave the vehicle fitted with four snow tires or purchase a set
of tire chains for the rear tires.
Ensure that all tires are the same size and brand, and that chains
match the size of the tires.

367
4−2. Maintenance
4
Maintenance and care
General maintenance
Engine compartment
Items Check points
BatteryMaintenance−free (
P. 387)
Brake fluidAt the correct level? (
P. 384)
Engine coolantAt the correct level? (
P. 382)
Engine oilAt the correct level? (
P. 377)
Exhaust systemNo fumes or strange sounds?
Power steering fluidAt the correct level? (
P. 386)
Radiator/condenser/hosesNot blocked with foreign matter?
( P. 383)
Washer fluidAt the correct level? (
P. 338)
Listed below are the general maintenance items that should be per
formed at the intervals specified
in the “Owner ’s Warranty Informa
tion Booklet”, “Owner ’s Manual Supplement”. It is recommended
that any problem you notice should be brought to the attention of
your Toyota dealer or qualified service shop for advice.

371
4
Maintenance and care
4−3. Do−it−yourself maintenance
Do−it−yourself ser vice precautions
If you perform maintenance yourself, be sure to follow the correct
procedure given in these sections.
ItemsParts and tools
Battery condition (
P. 3 8 7)Warm water
Baking soda
Grease
Conventional wrench
(for terminal clamp bolts)
Brake fluid level (
P. 384)FMVSS No.116 DOT 3 or SAE
J1703 brake fluid
Rag or paper towel
Funnel (used only for adding
brake fluid)
Engine coolant level (
P. 382)“Toyota Super Long Life Coolant”
or similar high quality ethylene
glycol based non−silicate, non−
amine, non−nitrite and non−borate
coolant with long−life hybrid
organic acid technology.
“Toyota Super Long Life Cool−
ant” is pre−mixed with 50% cool−
ant and 50% deionized water.
Funnel (used only for adding cool−
ant)
Engine oil level (
P. 377)“Toyota Genuine Motor Oil” or
equivalent
Rag or paper towel
Funnel (used only for adding
engine oil)
Fuses (
P. 413)Fuse with same amperage ratingas original

375
4−3. Do−it−yourself maintenance
4
Maintenance and care
Engine compar tment
Power steering fluid reser−
voir ( P. 386)
Engine oil level dipstick
(P. 377)
Engine coolant reservoir
(P. 382)
Cooling fan
Engine oil filler cap
(
P. 378)Brake fluid reservoir
(P. 384)
Fuse box ( P. 413)
Washer fluid tank
(P. 390)
Battery (
P. 387)
Condenser ( P. 383)
Radiator (
P. 383)
51234678
911 1 0ITY43C004

377
4−3. Do−it−yourself maintenance
4
Maintenance and care
Engine oil
With the engine at operating temperature and turned off, check the oil
level on the dipstick.
nChecking the engine oil
Park the vehicle on level gro und. After turning off the engine,
wait a few minutes for the oil
to drain back into the bottom of
the engine.
Hold a rag under the end and
pull the dipstick out.
Wipe the dipstick clean.
Reinsert the dipstick fully.
Holding a rag under the end, pull the dipstick out and check
the oil level.
Wipe the dipstick and reinsert it fully.
Low
Full
STEP1
ITY43C006
STEP2
STEP 3
STEP 4
STEP 5
STEP6

378 4−3. Do−it−yourself maintenance
nAdding engine oil
If the oil level is below or near
the low level mark, add engine
oil of the same type as already in
the engine.
Make sure to check the oil type and prepare the items needed before
adding oil.
Remove the oil filler cap.
Add engine oil slowly,
checking the dipstick.
Install the filler cap, turning it clockwise.
ITY43C011
Oil gradeILSAC multigrade engine oil
Oil quantity
(Low
Full)
1.2 qt. (1.1 L, 1.0 Imp. qt.)
Items
Clean funnel
STEP1
STEP 2
STEP 3

380 4−3. Do−it−yourself maintenance
nEngine oil consumption
lThe amount of engine oil consumed depends on the oil viscosity, the
quality of the oil and the way the vehicle is driven.
lMore oil is consumed under driving conditions such as high speeds and
frequent acceleration and deceleration.
lA new engine consumes more oil.
lWhen judging the amount of oil consumption, keep in mind that the oil
may have become diluted, making it difficult to judge the true level accu−
rately.
nResetting the engine oil maintenance data
The oil change system should be reset. Perform the following procedures:
Switch the display to the trip meter A when the engine is running.
( P. 161)
Turn the “ENGINE START STOP” switch OFF.
While pressing the trip meter reset button, set the “ENGINE START
STOP” switch to IGNITION ON mode (but do not start the engine
because otherwise the reset mode will be cancelled). Continue to
press and hold the button until the multi−information display indi−
cates that the reset is complete.
STEP1
STEP 2
STEP 3