2008 TOYOTA LAND CRUISER Light

425
4−3. Do−it−yourself maintenance
4
Maintenance and care
nAfter a fuse is replaced
lIf the lights do not turn on even after the fuse has been replaced, a bulb
may need replacement. (
P. 426)
lIf the replaced fuse blows again, have the vehicle inspected by your Toy−
ota dealer.
nIf there is an overload in the circuits
l
The fuses are designed to blow the entire wiring harness is damaged.
CAUTION
nTo prevent system breakdowns and vehicle fire
Observe the following precautions.
Failing to do so may cause damage, and possibly a fire or injury.
lNever use a fuse of a higher amperage rating than indicated, or use any
other object in place of a fuse.
lAlways use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
This can cause extensive damage or even fire.
lDo not modify fuses or the fuse box.
NOTICE
nBefore replacing fuses
Have the cause of electrical overload determined and repaired by your Toy−
ota dealer.

426
4−3. Do−it−yourself maintenance
Light bulbs
You may replace the following bulb s yourself. For more information
about replacing other light bulbs,
contact your Toyota dealer.
nPrepare a replacement light bulb.
Check the wattage of the light bulb being replaced. (
P. 503)
n
P. 376
n
Front bulb locations
n
Rear bulb locations
ITY43C074
Front side marker light
Parking light
Front fog light Headlight
high beam Headlight low beamFront turn signal light
ITY43C075
License plate lights
Rear turn signal
lightBack−up light

427
4−3. Do−it−yourself maintenance
4
Maintenance and care
Replacing light bulbs
nHeadlight low beam
Turn the bulb base counterclock−
wise.
Unplug the connector while
depressing the lock release.
ITY43C038
STEP1
ITY43C039
STEP2

428 4−3. Do−it−yourself maintenance
nHeadlight high beam
Turn the bulb base counterclock−
wise.
Unplug the connector while
depressing the lock release.
ITY43C040
STEP1
ITY43C041
STEP2

429
4−3. Do−it−yourself maintenance
4
Maintenance and care
nFront fog light
Remove the fender liner bolts
and clip and remove the fender
liner.
Turn the bulb base counterclock−
wise.
Unplug the connector while pull−
ing the lock release.
STEP1
ITY43C042
STEP2
ITY43C043
STEP3

430 4−3. Do−it−yourself maintenance
nParking light
Turn the bulb base counterclock−
wise.
Remove the light bulb.
ITY43C048
STEP1
ITY43C049
STEP2

431
4−3. Do−it−yourself maintenance
4
Maintenance and care
nFront turn signal light
For the left side only: Remove
the securing bolt and move the
washer fluid filler opening.
Turn the bulb base counterclock−
wise.
Remove the light bulb.
ITY43C012
STEP1
ITY43C044
STEP2
ITY43C045
STEP3

432 4−3. Do−it−yourself maintenance
nFront side marker light
For the left side only: Remove
the securing bolt and move the
washer fluid filler opening.
Turn the bulb base counterclock−
wise.
Remove the light bulb.
ITY43C012
STEP1
ITY43C050
STEP2
ITY43C051
STEP3