2008 TOYOTA LAND CRUISER air filter

OTHER FUNCTIONS
11 5
INFORMATION ITEMS
“ENGINE OIL”: Replace engine oil
“OIL FILTER”: Replace engine oil filter
“ROTATION”: Rotate tires
“TIRES”: Replace tires
“BATTERY”: Replace battery
“BRAKE PAD”: Replace brake linings
“WIPERS”: Replace wiper blades
“LLC”: Replace engine coolant
“BRAKE OIL”: Replace brake fluid
“ATF”: Replace ATF (Automatic Trans-
mission Fluid)
“SERVICE”: Scheduled maintenance
“AIR FILTER”: Replace air filter
“PERSONAL”: New information items
can be created separately from provided
ones.
4. Input the conditions.
Notice of “Date”: The next maintenance
date can be input.
Notice of “Distance”: The driving dis-
tance until the next maintenance check
can be input.
“Delete”: To cancel the date and distance
conditions.
“Reset”: To reset the date and distance
conditions.
5. Touch “OK”.
The screen then returns to the “Mainte-
nance” screen.
INFORMATION
For scheduled maintenance infor-
mation, please refer to the “Own-
er’s Manual Supplement/Sched-
uled Maintenance”.
Depending on driving or road con-
ditions, the actual date and dis-
tance may differ from the stored
date and distance in the system.

AIR CONDITIONING
244
1Air flow control touchscreen but-
tons248 . . . . . . . . . . . . . . . . . . . . . .
2Rear air conditioning control
touchscreen button 250 . . . . . .
3“4ZONE”
(Temperature setting mode change
touch−screen button) 247. . . . . . . .
4Fan speed control touchscreen
buttons249 . . . . . . . . . . . . . . . . . . .
5“A/C”250 . . . . . . . . . . . . . . . . . . . . .
6Air intake control button249 . . . .
7“REAR” button 250 . . . . . . . . . . . .
8Micro dust pollen filter button
252 . . . . . . . . . . . . . . . . . . . . . . . . . . .
9Windshield air flow button
251 . . . . . . . . . . . . . . . . . . . . . . . . . . .
10“OFF” button246 . . . . . . . . . . . . . .
11“AUTO” button246 . . . . . . . . . . . .
12“CLIMATE” button
(Air conditioning operation screen
display button) 246. . . . . . . . . . . . . .
Automatic air conditioning controls

AIR CONDITIONING
252
(d) Micro dust and pollen filter
Outside air mode switches to recirculated
air mode. Pollen is removed from air and
the air flows to the upper part of the body.
Usually the system will turn off automati-
cally approximately 3 minutes later.
To stop the operation, press the button
again.(e) Center vents and side vents
Side vents
Rear vents

AIR CONDITIONING
253
If air flow control is not satisfactory,
check the center vents and side vents.
The center vents and side vents may be
opened or closed as shown.(f) Checking and replacing the air
conditioning filter
The air conditioning filter information
label is placed in the glove box as
shown and indicates that a filter has
been installed.
The air conditioning filter prevents dust
from entering the vehicle through the air
conditioning vent.

AIR CONDITIONING
254
The air conditioning filter is behind the
glove box.
The air conditioning filter may clog after
long use. The filter may need to be re-
placed if the air flow of the air conditioner
and heater experiences extreme reduc-
tions in operating efficiency, or if the win-
dows become to fog up easily.
To maintain the air conditioning efficiency,
inspect and replace the air conditioning fil-
ter according to the maintenance sched-
ule. In dusty areas or areas with heavy
traffic flow, such as inner city or desert
areas, early replacement may be required.
(For scheduled maintenance information,
please refer to the “Warranty and Services
Guide/Owner’s Manual Supplement/
Scheduled Maintenance”.)
Before replacing the air conditioning filter,
turn the “ENGINE START STOP” switch
IGNITION ON mode and switch to recircu-
lated air mode, then turn the “ENGINE
START STOP” switch off.1. Open the glove box and remove the
partition.
2. Remove the filter cover.

AIR CONDITIONING
255
3. Take out the filter case.
4. Remove the filter from the filter
case.
5. Inspect the filter on the surface.
If it is dirty, it should be replaced.
When installing the filter in the filter
case, keep the arrow pointing up.
INFORMATION
The air conditioning filter should be
installed properly in position. The
use of air conditioning with the filter
removed may cause deteriorated
dustproof performance and then af-
fect air conditioning performance.