2008 TOYOTA HIGHLANDER Owners Manual

368 3-6. Using the storage features
Type DLift the lid.
■Auxiliary box (type D)
Install the side table. ( P. 369)
CAUTION
■Caution while driving
Keep the auxiliary boxes closed.
Injuries may result in the event of an accident or sudden braking.
Auxiliary boxes

369
3-6. Using the
storage features
3
Interior features
Side table
■ Installing the side table
Take out the side table from the
console box.
Remove the second center seat. ( P. 83)
Engage the front pins of the
side table with the hooks.
Push down on the side table to
engage the rear pin locks.
■ Removing the side table
Take out the second center seat
from the console box.
STEP1
STEP2
STEP3
STEP1
Side table

370 3-6. Using the storage features
Pull the lock release lever to
remove the side table.
Stow the side table in the con-
sole box.
Push down on the end to engage
the pins in the holes and close
the console box door.
Make sure that the side table is
securely locked in position.
STEP2
STEP3
STEP4
CAUTION
■Caution while driving
Keep the console box closed.
Injuries may result in the event of an accident or sudden braking.
Side table

371
3
Interior features
3-7. Other interior features
Sun visors
Forward position:
Flip down.
Side position:
Flip down, unhook, and
swing to the side.
Side extender:
Place in side position then
slide backwards.

372
3-7. Other interior features
Vanity mirror
Slide the cover.
The light turns on when the
cover is opened. (vehicles with
vanity mirror light)

373
3-7. Other interior features
3
Interior features
Clock (vehicles without multi-infor mation display)
■The clock is displayed when
The “ENGINE START STOP” switch or the engine switch is in ACC or ON.
Adjusts the hours.
Adjusts the minutes.

374
3-7. Other interior features
Conversation mirror
Press in the lid.
Lower the overhead con-
sole.
Push the lid back up half
way.
The top of the mirror catch
in position.

375
3-7. Other interior features
3
Interior features
Power outlet
The power outlet can be used for a following component.
12 V: Accessories that run on less than 10 A.
115 VAC: Audio device that use less than 100 W.
Type A (12 V)*
1
Type B (12 V)*2