428 4-3. Do-it-yourself maintenance
■Adding engine oil
If the oil level is below or near
the low level mark, add engine
oil of the same type as already in
the engine.
Make sure to check the oil type and prepare the items needed before
adding oil. Remove the oil filler cap.
Add engine oil slowly, checking the dipstick.
Install the filler cap, turning it clockwise.
The approximate quantity of oil needed to raise the level from low to full on
the dipstick is indicated as follows:
1.6 qt. (1.5 L, 1.3 lmp. qt.)
■ Recommended viscosity
SAE 5W-20 or 0W-20
SAE 5W-20 or 0W-20 engine oil
may be used. However, SAE 0W-
20 is the best choice for good fuel
economy, and good starting in
cold weather.
Oil grade ILSAC multi-grade engine oil
Items Clean funnel
STEP1
STEP2
STEP3
Outside temperature
580
GAS STATION INFORMATION
Auxiliary catch leverP. 420Fuel filler doorP. 1 1 5
Hood lock release lever
P. 4 2 0
Fuel filler door opener P. 1 1 5Tire inflation pressure
P. 539
Back door openerP. 7 7
Fuel tank capacity (Reference) 1 7.2 gal. (65.0 L, 14.3 lmp.gal.)
Fuel typeUnleaded gasoline with an Octane Rating
of 87 (Research Octane Number 91)
Cold tire inflation
pressure
P. 5 3 9
Engine oil capacity
Drain and refill
(Reference)qt. (L, Imp.qt.)
Without filter 4.8 (4.5, 4.0)
With filter 5.0 (4.7, 4.1)
Engine oil type Toyota Genuine Motor Oil or equivalent
Oil grade: P. 534
ILSAC multigrade engine oil
Recommended oil viscosity: SAE-5W-20 or SAE-0W-20
