2008 TOYOTA AVALON engine

BASIC FUNCTIONS
16
Your navigation system can be oper-
ated by the navigation controller when
the engine switch is set at ACC or ON.
To access the navigation controller—
Push the lid to open.
To turn on the navigation display—
Push the
“MAP/VOICE”, “MENU”,
“DEST” or “INFO” button.
To turn off the navigation display—
Push the
“DISP” button and select the“SCREEN OFF”.
For details, see “Controller and buttons” on
page 12.
NOTICE
To prevent the battery from being
discharged, do not leave the navi-
gation system on longer than nec-
essary when the engine is not run-
ning.
Do not place heavy objects on the
controller.
Your navigation system

BASIC FUNCTIONS
62
ENDUSER TERMS
The data (“Data”) is provided for
your personal, internal use only
and not for resale. It is
protected by copyright, and is
subject to the following terms
and conditions which are agreed
to by you, on the one hand, and
DENSO CORPORATION
(“[CLIENT]”) and its licensors
(including their licensors and
suppliers) on the other hand.
©2005 NAVTEQ. All rights re-
served.
The Data for areas of Canada
includes information taken with
permission from Canadian author-
ities, including: ©Her Majesty the
Queen in Right of Canada,
©Queen’s Printer for Ontario,
©Canada Post Corporation, Geo-
Base.
TERMS AND CONDITIONS
Personal Use Only. You agree
to use this Data together with the
navigation system for the solely
personal, non−commercial pur-
poses for which you were li-
censed, and not for service bu-
reau, time−sharing or other simi-
lar purposes. Accordingly, but
subject to the restrictions set
forth in the following paragraphs,
you may copy this Data only as
necessary for your personal use
to (i) view it, and (ii) save it,
provided that you do not remove
any copyright notices that appear
and do not modify the Data in
any way. You agree not to
otherwise reproduce, copy,
modify, decompile, disassemble
or reverse engineer any portion
of this Data, and may not trans-
fer or distribute it in any form, for
any purpose, except to the extent
permitted by mandatory laws.
Data provided in multi−disc sets
may not be transferred or sold
on a divided or single disc basis.

BASIC FUNCTIONS
67
OWNERSHIP
The DATABASE and the copy-
rights and intellectual property
and neighboring rights therein
are owned by Tele Atlas North
America, Inc. (“TANA”) and its li-
censors. This Agreement does
not transfer any title or interest
in the DATABASE, except for the
license to use the DATABASE ac-
cording and subject to the terms
and conditions of this Agreement.
You shall not alter, obscure or
remove any copyright notices,
trademark notices or other re-
strictive legends relating to the
DATABASE.
The DATABASE comprises confi-
dential and proprietary informa-
tion and materials of TANA. Ac-
cordingly, you shall hold the DA-
TABASE in confidence and trust.
You shall take reasonable steps
to protect the DATABASE from
misappropriation or misuse. You
shall not extract stand−alone
data from or publish any part of
the DATABASE without the prior
written consent of TANA and its
licensors.
LIMITATIONS ON USE
The DATABASE is restricted for
use in the specific system for
which it was created. Except to
the extent explicitly permitted by
mandatory laws, you may not ex-
tract or reutilize any portion of
the contents of the DATABASE,
nor reproduce, copy, duplicate,
modify, adapt, translate, disas-
semble, decompile, or reverse
engineer any portion of the DA-
TABASE.TRANSFER
You may not transfer the DATA-
BASE to third parties, except to-
gether with the system for which
it was created, provided that you
do not retain any copy of the
DATABASE, and provided that
the transferee agrees to all terms
and conditions of this AGREE-
MENT.
DISCLAIMER OF WARRANTY
THE DATABASE IS PROVIDED
ON AN “AS IS” AND “WITH ALL
FAULTS BASIS” AND DENSO
AND TANA (AND THEIR LICEN-
SORS AND SUPPLIERS) EX-
PRESSLY DISCLAIM ALL OTH-
ER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT
LIMITED TO, THE IMPLIED
WARRANTIES OF NON−IN-
FRINGEMENT, MERCHANTABIL-
ITY, SATISFACTORY QUALITY,
ACCURACY, TITLE AND FIT-
NESS FOR A PARTICULAR
PURPOSE. NO ORAL OR
WRITTEN ADVICE OR IN-
FORMATION PROVIDED BY
DENSO OR TANA (OR ANY OF
THEIR LICENSORS, AGENTS,
EMPLOYEES OR THIRD PARTY
PROVIDERS) SHALL CREATE A
WARRANTY, AND YOU ARE
NOT ENTITLED TO RELY ON
ANY SUCH ADVICE OR IN-
FORMATION. THIS DISCLAIM-
ER OF WARRANTIES IS AN ES-
SENTIAL CONDITION OF THIS
AGREEMENT.

BASIC FUNCTIONS
70
END USER NOTICE
PLEASE READ THIS NOTICE
CAREFULLY BEFORE USING
THIS NAVIGATION SYSTEM
The Point Of Interest Data
(“POI” Data) in the navigation
system is in part provided by
infoUSA Inc. (“infoUSA”). By
using the POI Data, you accept
and agree to all terms and con-
ditions set forth below.
1. OWNERSHIP
All rights, title and interest to the
infoUSA POI Data shall be re-
tained by infoUSA.
2. LIMITATIONS ON USE
Except to the extent explicitly
permitted by mandatory laws, you
may not extract or reutilize any
portion of the contents of the
POI Data, nor reproduce, copy,
modify, adapt, translate, disas-
semble, decompile, or reverse
engineer any portion of the POI
Data.3. TRANSFER
You may not transfer the POI
Data to third parties, except to-
gether with the system for which
it was created, provided that you
do not retain any copy of the
POI Data.
4. DISCLAIMER OF WARRANTY
EXCEPT AS STATED HEREIN,
INFOUSA MAKES NO EXPRESS
OR IMPLIED WARRANTIES, IN-
CLUDING, WITHOUT LIMITA-
TION, ANY EXPRESS OR IM-
PLIED WARRANTY OF FITNESS
FOR A PARTICULAR PURPOSE
OR WARRANTY OF MERCHANT-
ABILITY.
5. LIMITATION OF LIABILITY
EITHER INFOUSA OR SUPPLI-
ER OF POI DATA SHALL NOT
BE LIABLE FOR ANY INDIRECT,
CONSEQUENTIAL OR INCIDEN-
TAL DAMAGES MADE OR AL-
LEGED IN CONNECTION WITH
YOUR USE OF THE POI DATA.

MORE ADVANCED FUNCTIONS
11 6
Information items
Scheduled maintenance
Replace engine oil
Replace engine oil filter
Rotate tires
Replace tires
Replace battery
Replace brake lining
Replace wiper blades
Replace engine coolant
Replace brake fluid
Replace ATF
Replace air filter
Personal

OTHER FUNCTIONS
130
“Consumption”
The instantaneous fuel consumption is
calculated and displayed based on dis-
tance and fuel consumption for 1 second
with the engine running.
The displayed value is updated every 1
second.
Note that an accurate figure may not be
shown in the following cases.
When the vehicle is stopped with the en-
gine running, the display will indicate
the extremely high fuel consumption.
When the vehicle is driving down a long
slope, applying the engine brake, the
display will indicate the extremely
low fuel consumption.
The calculation is reset when the engine
switch is turned off.
“After Refueling”
The average fuel consumption is calcu-
lated and displayed based on total driving
distance and total fuel consumption with
the engine running.
The displayed value is updated every 10
seconds.
Every time you refuel the vehicle, the cal-
culation is reset. When refueling, be sure
to stop your vehicle and turn the engine
switch off.“Cruising Range”
The distance the vehicle can travel with the
remaining fuel is calculated and displayed
based on the quantity of remaining fuel
and past fuel consumption.
The driving range display indicates the
approximate distance that you can drive
until the fuel gauge reaches “E”. It is differ-
ent from the actual distance traveled.
The displayed value is updated every time
the fuel equivalent for 1 mile or 1 km is con-
sumed.
Every time you refuel the vehicle, the cal-
culation is reset. When refueling, be sure
to stop your vehicle and turn the engine
switch off.
The actual driving range varies with driving
habits and road conditions. If fuel con-
sumption is good, the driving range will be
longer. If fuel consumption is poor, the driv-
ing range will be shorter.
If the low fuel level warning light comes on,
refuel even if the display indicates that the
vehicle can be driven further.
“Average Speed”
The average speed is calculated and dis-
played based on the total driving distance
and the total driving time with the engine
running.
The displayed value is updated every 10
seconds.
To reset the calculation, push the
“EN-
TER”
button.
“Distance”
The trip distance is displayed.
To reset the calculation, push the
“EN-
TER” button. The average speed is also
reset.

OTHER FUNCTIONS
132
When the headlight switch is at “ON”
position, the screen changes to the day
mode or night mode.
To display the screen in the day mode even
with the head light switch on, select
“DAY
MODE” switch on the adjustment screen
for brightness and contrast control.
If the screen is set in the day mode with the
headlight switch turned to on, this condi-
tion is memorized in the system even with
the engine turned off.The speech command system allows
you to operate the navigation system
with your voice.1. Push the talk switch.
A beep sounds and an indicator is shown
on the screen.
Speech command system

3
For safety reasons, this manual indicates
items requiring particular attention with the
following marks.
CAUTION
This is a warning against anything
which may cause injury to people if
the warning is ignored. You are in-
formed about what you must or must
not do in order to reduce the risk of
injury to yourself and others.
NOTICE
This is a warning against anything
which may cause damage to the ve-
hicle or its equipment if the warning
is ignored. You are informed about
what you must or must not do in or-
der to avoid or reduce the risk of dam-
age to your vehicle and its equip-
ment.
INFORMATION
This provides additional information.
Initial screen
When you start the engine or when
the engine switch is set to the ACC,
the initial “TOYOTA” screen appears
and the system begins operating.
CAUTION
When the vehicle is stopped with the
engine running, always apply the
parking brake for safety.
After a few seconds, the “CAUTION”
screen appears.
Important information about
this manual