2008 SUZUKI GRAND VITARA oil filter

[x] Cancel search: oil filter

Page 1 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual Part No. 99011-66J22-03E
July, 2007
OWNER’S MANUAL
99011-66J22-03E GRAND VITARA
Printed in Japan
See page 1-1
12.5 mm
Keep With Vehicle At All Times.
Contains Important Information
On Safety, Operat

Page 207 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual INSPECTION AND MAINTENANCE
9
66J22-03E
60G410
INSPECTION AND MAINTENANCEMaintenance Schedule  ....................................................... 9-2
Periodic Maintenance Schedule  ...............

Page 210 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-3INSPECTION AND MAINTENANCE
66J22-03E
Periodic Maintenance ScheduleR: Replace or change
I : Inspect, clean, adjust, lubricate or replace as necessaryInterval: This interval should be judged by odome

Page 211 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-4
INSPECTION AND MAINTENANCE
66J22-03E
R: Replace or change
I : Inspect, clean, adjust, lubricate or replace as necessary
#1: Inspect at 250000 km (150000 miles) or 180 months.
NOTE:
The maintenance

Page 212 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-5INSPECTION AND MAINTENANCE
66J22-03E
R: Replace or change
I : Inspect, clean, adjust, lubricate or replace as necessaryInterval: This interval should be judged by odometer
reading or months, whiche

Page 213 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-6
INSPECTION AND MAINTENANCE
66J22-03E
R: Replace or change
I : Inspect, clean, adjust, lubricate or replace as necessary
NOTE:
This table shows the service schedule up to 250000 km (150000 miles).

Page 214 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-7INSPECTION AND MAINTENANCE
66J22-03E
Maintenance Recommended under Severe Driving ConditionsIf the vehicle is usually used under the conditions corresponding to any severe condition code given belo

Page 215 of 290

SUZUKI GRAND VITARA 2008 3.G Owners Manual 9-8
INSPECTION AND MAINTENANCE
66J22-03E
NOTE:
I – Inspect, clean, adjust, lubricate or replace as necessary
T – Tighten to the specified torque
R – Replace or change
L – Lubricate
*1 Inspect
Page:   1-8 9-16 17-24 next >