2008 SUZUKI GRAND VITARA warning light

Downloaded from www.Manualslib.com manuals search engine OPERATING YOUR VEHICLE
A WARNING
If
water gets into the brake drums,
brake performance may become poor
and unpredictable.
After driving through water or wash­
ing the underside of the vehicle, test
the brakes while driving at a slow speed to see if they have maintained
their normal effectiveness. If the
brakes are less effective than normal, dry them by repeatedly applying the
brakes while driving slowly until the
brakes have regained their normal effectiveness.
Power Assisted Brakes Your vehicle has power assisted brakes. If power assistance is lost due to a stalled engine or other failures, the system is still
fully operational on reserve power and you can bring the vehicle to a complete stop by pressing the brake pedal once and holding it down. The reserve power is partly used
up when you depress the brake pedal and reduces each time the pedal is pressed. Apply smooth and even pressure to the pedal. Do not pump the pedal.
3-31
A WARNING
Even without reserve power in the
brake system, you can still stop the vehicle by pressing the brake pedal harder than normally required. How­ever, the stopping distance may be longer.
Brake Assist System When you slam the brakes on, the brake
assist system judges as an emergency
stop and provides more powerful braking
for a driver who cannot hold down the
brake pedal firmly.
NOTE: If you quickly and forcefully depress the
brakes, you may hear a clicking sound in
the brake pedal. This is normal and indi­
cates that the brake assist system is acti­
vated properly.
Anti-Lock Brake System (ABS) ASS will help you avoid skidding by elec­
tronically controlling braking pressure. It
will also help you maintain steering control when braking on slippery surfaces or when
braking hard.
The
ASS works automatically, so you do
not need any special braking technique.
Just push the brake pedal down without
pumping. The ASS will operate whenever it
senses that the wheels are locking up. You may feel the brake pedal pulsate while the ASS is operating.
NOTE: The ABS will not work if vehicle speed is under about 5 - 6 kmlh (3 - 4 mph).
A WARNING
•
On some types of loose surfaces
(such as gravel, snow-covered
roads, etc.) the stopping distance
required for
an ABS-equipped vehi­cle may be slightly greater than for
a comparable vehicle with a con­ventional brake system. With a conventional brake system, skid­
ding tires are able to "plow" the gravel or snow layer, shortening
the stopping distance, ABS mini­
mizes this resistance effect. Allow for extra stopping distance when driving on loose surfaces. • On regular paved roads, some driv­
ers may be able to obtain slightly shorter stopping distances with
conventional brake systems than
with
ABS. • In both of the above conditions, ABS wi II still offer the advantage of helping you maintain directional control. However, remember that ABS will not compensate for bad road or weather conditions or poor
driver judgment. Use good judg­
ment and do not drive faster than
conditions will
safely allow.

Downloaded from www.Manualslib.com manuals search engine (8) or ABS
(1) (2)
(CD)
BRAKE (3)
(1) ABS warning light Type 1 (2) ABS warning light Type 2 (3) Brake system warning light
A WARNING
65D451
If the ABS warning light «1) or (2» on
the instrument panel comes on and
stays on while driving, there may be a
problem with the ABS system. If this happens:
1) Pull off the road and stop care­
fully.
2) Turn the ignition switch to "LOCK" and then start the engine again.
(Continued)
A WARNING
(Continued) If the warning light comes on briefly then turns off, the system is normal.
If the. warning light still stays on,
have the system inspected by your
SUZUKI dealer immediately.
If the ABS system becomes inopera­tive, the brake system will function as
an ordinary brake system that has no
ABS.
A WARNING
If the ABS warning light «1) or (2» and the Brake system warning light (3) on the instrument panel simulta­
neously stays on or comes on when
driving, both anti-lock function and
rear brake force control function (pro­portioning valve function) of the ABS system may have failed. If so, the rear wheels may easily skid or the vehicle can even spin in the worst case when
braking on a slippery road or when
hard braking even on a dry paved
road. Ask your SUZUKI dealer to inspect the ABS system immediately. Drive carefully, avoiding hard braking
as much as possible.
OPERATING YOUR VEHICLE
How the ABS Works A computer continuously monitors wheel speed. The' computer compares the
changes in wheel speed when braking. If the wheels slow suddenly, indicating a
skidding Situation, the computer will change braking pressure several times
each second to prevent the wheels from locking. When you start your vehicle or when you accelerate after a hard stop, you may hear a momentary motor or clicking sound as the system resets or checks itself.
A WARNING
The ABS may not work properly if
tires or wheels other than those
specified in the owner's manual are
used. This is because the ABS works
by comparing changes in wheel speed. When replacing tires or wheels, use only the size and type
specified in this owner's manual.
3-32

Downloaded from www.Manualslib.com manuals search engine A WARNING
• The ESP® may not work properly if tires or wheels other than those specified in the Owner's Manual are
used. When replacing tires or wheels, use only the size and type
specified in this Owner's Manual. • The ESP® may not work properly if
tires are not inflated to the recom­mended tire inflation pressure. • The ESP® may not work properly if tires are fitted with tire chains. • The ESP® may not work properly if the tires are excessively worn. Be sure to replace tires when the tread
wear indicators in the grooves
appear
on the tread surface. • The ESP® is not a substitute for winter tires or tire chains on a snow covered road.
A WARNING
• The ESP® may not work properly if engine related parts such as 'the
muffler are not equivalent to stan­dard equipment or are extremely
deteriorated.
• Do not modify the vehicle's sus­pension since the ESP® may not
operate correctly.
The ESP® indicator lights are described below:
SLIP Indicator Light
79K019
The SLIP indicator light in the instrument cluster blinks 5 times per second when one
of the following systems is activated. • Stability control system ' • Traction control system • Hill descent control system (if equipped)
CAUTION
If the SLIP indicator light comes on and stays on while driving, there may
be a malfunction of the ESP® sys­tems (other than ABS). You should
have the systems inspected by an
authorized
SUZUKI dealer.
NOTE: When the SLIP indicator light comes on and stays on while driving, indicating a malfunction of the ES~ systems (other
than ABS), the brake system will function
as an ordinary ABS with no additional ES~ functions.
OPERATING YOUR VEHICLE
NOTE: When you disconnect and re-connect the
battery, ES~ system functions other than ABS will be deactivated and the slip indica­tor light will blink 1 time per second. In this
case, use the following procedure to re­activate the ES~ systems: 1) Drive your vehicle straight ahead with­out tire slippage at a speed greater than
approximately 15 kmlh (9 mph) for a few seconds
2) The slip indicator light will go out and
the ESf/8J systems (other than ABS) will
be re-activated
It may take more than few seconds before
the slip indicator light goes out depending
on the road. surface condition.
3-34

Downloaded from www.Manualslib.com manuals search engine OPERATING YOUR VEHICLE
"ESP" Warning Light
ESP
66J031
When the ESP® systems (other than ABS) have a system malfunction, the "ESP" warning light in the instrument cluster comes on.
CAUTION
If the "ESP" warning light comes on,
or stays on while driving, there may
be a malfunction of the ESP® sys­tems (other than ABS). You should
have the systems inspected by an authorized SUZUKI dealer.
NOTE: When the "ESP" warning light comes on, or stays on while driving, indicating a mal­function of the ESp!Y systems (other than ABS), the brake system will function as an
ordinary ABS that has no additional ESp!Y functions.
NOTE: The information display shows the warning and indicator message when this light
comes on.
3-35
"ESP OFF" Indicator Light
ESP
OFF
66J032
You should turn the ESP® on during your
ordinary driving, so that you have the ben­efits of all of the ESP® systems.
It may be required to turn the ESP® sys­tems (other than ABS) off if your vehicle is stuck in sand, mud, or snow, or when driv­ing in extreme off-road conditions where wheel spin is necessary.
"ESP OFF" switch
(without hill descent control)
(1)
78K045
(with hill descent control)
'"'---+-( 1 )
78K046
(1) "ESP OFF" switch
When the
"ESP OFF" switch located at the
center of the instrument panel is pushed
and held
to turn off the ESP® systems
(other than ABS), the "ESP OFF" indicator
light in the instrument cluster comes on. When you push and hold the "ESP OFF" switch again, the "ESP OFF" indicator light will go out and all of the ESP® systems will be activated.
NOTE: • When the vehicle speed is greater than
approximately 30 kmlh (19 mph), the ESp!Y systems (other than ABS) will turn on automatically and the "ESP OFP' indicator light will go out. • When the transfer switch (if equipped) is turned to the "4L LOCK" position, the

Downloaded from www.Manualslib.com manuals search engine ES~ systems (other than ABS) will be
canceled to provide improved vehicle
traction, and the
~'ESP OFF" indicator
light will come on. When the transfer switch (if equipped) is
turned to the "4L LOCK" position, brake­
traction control can be activated. Brake­
traction control brakes the spinning
wheel to distribute drive power to the other wheels for increased climbing abil­
ity or for better performance on a rolling
hill or a slipe,ery surface .. • If the ESpE> systems operate continu­ously, such as when driving on slippery roads, the traction control functions of the ES~ systems may be canceled
temporarily to avoid overheating the brake pads, and the "ESP OFF" indicator
light will come on. After a short period of time, the ES~ systems (other than ABS) will turn on automatically and the "ESP OFF" indicator light will go out. • If your vehicle is equipped with a hill
descent control system and a hill hold
control system, these systems will not be
turned off
when the "ESP OFF" switch is pushed to turn off the ES~ systems.
E'::.F' OFF I-Qf - -a.'ND S\l',/IT'_ H V"/I)R~;',. I-6-t ONL ',' IN 4HL
79K084
NOTE: If, you push the "ESP OFF" switch when the transfer switch is in the "4H" position, the ES~ systems will not be turned off, and the message shown in the above illus­
tration will appear on the information dis­play. You should turn the transfer switch to the "4H LOCK" position to turn off the ES~ systems. Refer to "Using the Transfer Switch" in this section.
ABS Warning Light I Brake System
Warning Light
See 'Braking" in the "OPERATING YOUR VEHICLE" section.
OPERATING YOUR VEHICLE
Hill descent control System
(if equipped)
The hill descent control system is designed
to reduce the driver's workload when going
down steep, rough and/or slippery hills where the vehicle cannot decelerate enough by engine braking alone. The hill descent control system helps to control
vehicle speed by automatically engaging
the vehicle's brakes, as needed, so you can concentrate on steering the vehicle.
A WARNING
Do not rely excessively on the hill
descent control system. The hill
descent control system may not con­trol vehicle speed on a hill under all load or road conditions. Always be prepared to control vehicle speed by applying the brakes. Failure to pay
attention and control vehicle speed
using the brakes when necessary
may
result in loss' of control or an accident.
3-36