Downloaded from www.Manualslib.com manuals search engine INSPECTION AND MAINTENANCE
Door illumination light (for 5 door model)
Luggage compartment light
7-41
64J166
High-mount stop light (if equipped) The followings are the general procedure
for replace the bulbs of high-mount stop
light.
Since special procedures are required, we recommend you take your vehicle to your SUZUKI dealer for the bulbs of high-mount
stop light replacement.
To remove a high-mounted stop light hous
ing the following procedure:
1) Open the tailgate, and remove the trim
(1) as shown in the illustration.
64J182
2) Release the claws of the light housing
by the flat head etc. through the service
holes as shown
in the illustration.
Downloaded from www.Manualslib.com manuals search engine (2)
64J183
3) Close the tailgate. Remove a high
mounted stop light housing (2) from the tailgate.
64J184
4) Remove the each bulb. 5) Replace the bulbs. To install a high-mounted stop light housing in the reverse order of removal.
INSPECTION AND MAINTENANCE
Wiper Blades
54G129
If the wiper blades become brittle or dam
aged, or make streaks when wiping,
replace the wiper blades.
To install new wiper blades, follow the pro
cedures below.
CAUTION
To avoid scratching or breaking the
window, do not let the wiper arm
strike the window while replacing the
wiper blade.
NOTE: Some wiper blades may be different from
the ones described here depending on
vehicle specifications.
If so, consult your SUZUKI dealer for proper replacement
method.
7-42
