Downloaded from www.Manualslib.com manuals search engine INSPECTION AND MAINTENANCE
Spark Plugs
78K056
NOTE: For 3.2 L engine, to approach the spark
plugs, you need to remove the bolts shown in the illustration.
7-17
Type A
(1 )
65D434
For Type A, to access the spark plugs: 1) Remove the ignition coil cover. 2) Disconnect the coupler (1) while push
ing the release lever. 3) Remove the bolt. 4) Pull the ignition coil out.
Type B
(2)
65D435
For Type B, to access the spark plugs: 1) Disconnect the coupler (2) while push-
ing the release lever. 2) Remove the bolts. 3) Pull the spark plug boots out.
NOTE: When installation, make sure the wires, couplers, sealing rubber of top cover and
washers, are correctly returned in place.
Downloaded from www.Manualslib.com manuals search engine CAUTION
• (For Type B) Whim disconnecting the spark plug cables, pull on the
boot, not on the cable itself. Pulling on the cable can damage it. • When servicing the iridium/platinum spark plugs (slender center electrode type plugs), do not touch
the center electrode, as it is easy to damage.
EXAMPLE
Correct
60G102
CAUTION
• When disconnecting the spark plug cables, pull on the boot, not on the cable itself. Pulling on the cable can damage it. • When servicing the iridium/platinum spark plugs (slender center electrode type plugs), do not touch the center electrode, as it is easy to damage.
INSPECTION AND MAINTENANCE
~Loosen
~g~"'"
ifrl
~
CAUTION
60G160S
• When installing the spark plugs, screw them in with your fingers to avoid stripping the threads. Tighten
with a torque wrench to 25 Nm (2.5
kg-m, 18.1 Ib-ft). Do not allow contaminants. to enter the engine
through the spark plug holes when
the plugs are removed. . • Never use spark plugs with the
wrong thread size.
7-18
