2008 SMART FORTWO COUPE run flat

4>> Keywords Battery (key)
Replacing the transmitter battery . . . . 252
Bead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
Belt guide . . . . . . . . . . . . . . . . . . . . . . . . . 94
Brake Assistant see Hydraulic brake assistant
Brake fluid . . . . . . . . . . . . . . . . . . . . . . . . 180
Brake lamp . . . . . . . . . . . . . . . . . . . . . . . . 255
Brake system
Brake pedal . . . . . . . . . . . . . . . . . . . . . . 126
Brake warning lamp . . . . . . . . . . . . . . . . . 238
Bulbs
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . 255
Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . 258
Replacing . . . . . . . . . . . . . . . . . . . . . . . 254>> CCalifornian retail buyers and lessees,
Important notice for . . . . . . . . . . . . . . . . . 18
Care
Automatic car wash . . . . . . . . . . . . . . . . 228
Soft top system . . . . . . . . . . . . . . . . . . . 230
Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . 224
Cargo compartment parcel net bag . . . . 156
Catalytic converter . . . . . . . . . . . . . . . . . 215CD*
Changer . . . . . . . . . . . . . . . . . . . . . . . . . 144
Player . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Center console,
lower . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
upper . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Central locking . . . . . . . . . . . . . . . . . . . . . 84
Automatic . . . . . . . . . . . . . . . . . . . . . . . . 84
Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Certification label . . . . . . . . . . . . . . . . . . 293
Change of address or ownership . . . . . . . . 20
Changing a wheel, see Flat tire
Checking tire pressure electronically . . 192
Children in the vehicle
Front air bags . . . . . . . . . . . . . . . . . . . . . 59
Occupant Classification System (OCS) . . 60
Passenger front air bag off indicator
lamp . . . . . . . . . . . . . . . . . . . . . . . . . 64, 245
Restraint systems* . . . . . . . . . . . . . . . . . 66
Top tether* . . . . . . . . . . . . . . . . . . . . . . . 69
Cleaning, see Care
Climate control see Air conditioning*
Clock
Adjusting . . . . . . . . . . . . . . . . . . . . . . . . 138
See also Cockpit clock*
Coat hooks . . . . . . . . . . . . . . . . . . . . . . . . 159
Cockpit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Cockpit clock* . . . . . . . . . . . . . . . . . . . . . 140
Cold tire inflation pressure . . . . . . . . . . . 204
Coming home function* . . . . . . . . . . . . . . 105
Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . 241
Anticorrosion/antifreeze . . . . . . . . . . . 310
Checking the level . . . . . . . . . . . . . . . . . 178
Composition . . . . . . . . . . . . . . . . . . . . . . 309
Cup holder . . . . . . . . . . . . . . . . . . . . . . . . 155
Curb weight . . . . . . . . . . . . . . . . . . . . . . . . 204
>> DDaily trip, see Trip odometer
Data bus
Display message . . . . . . . . . . . . . . . . . . 236
Daytime running lamp mode . . . . . . . . . . . 103
Deep water see Standing water
Defroster
Rear window . . . . . . . . . . . . . . . . . . . . . . 154
Defrosting . . . . . . . . . . . . . . . . . . . . . . . . . 149
Air conditioning with automatic
climate control* . . . . . . . . . . . . . . . . . . . 153
Rear window . . . . . . . . . . . . . . . . . . . . . . 154
Dimensions, main . . . . . . . . . . . . . . . . . . . 302

Driving instructions
216
>> Operation
!
To prevent damage to the catalytic
converter, only use premium unleaded gaso

line in this vehicle.
Any noticeable irregularities in engine oper

ation should be repaired promptly. Otherwise,
excessive unburned fuel may reach the cata

lytic converter, causing it to overheat and
potentially start a fire.
It is essential to observe the following points,
as there is otherwise a danger of overheating
and the catalytic converter may be damaged.
• Fill up only with premium unleaded gasoline.
Even small quantities of leaded gasoline can
damage the catalytic converter.
• Make sure you adhere to the prescribed
service intervals.
• Never run the fuel tank empty.
• If the engine starts to misfire, bring the ve

hicle to an immediate standstill without en

dangering traffic.
• If the engine fails to start the first time, you
should not try to start it any more than
three times in succession.
• Do not try to start for more than four sec

onds at a time.
TiresTreadwear indicators (TWI) are required by
law. These indicators are located in six places
on the tread circumference and become visi

ble at a tread depth of approximately
1/16in
(1.6 mm), at which point the tire is considered
worn and should be replaced. The treadwear indicator appears as a solid
band across the tread.
Specified tire inflation pressures must be
maintained. This applies particularly if the
tires are subject to high loads (e.g. high
speeds, heavy loads, high ambient tempera

tures).
G
Warning!
If you feel a sudden significant vibration
or ride disturbance, or you suspect that
possible damage to your vehicle has
occurred, you should turn on the hazard
warning flashers, carefully slow down,
and drive with caution to an area which is
a safe distance from the road.
Inspect the tires and the vehicle under

body for possible damage. If the vehicle
or tires appear unsafe, have the vehicle
towed to the nearest smart center or tire
dealer for repairs.
G
Warning!
Although the applicable federal motor
vehicle safety laws consider a tire to be
worn when the treadwear indicators (TWI)
become visible at approximately
1/16in
(1.6 mm), we recommend that you do not
allow your tires to wear down to that
level. As tread depth approaches
1/8in
(3 mm), the adhesion properties on a wet
road are sharply reduced.
Depending upon the weather and/or road
surface (conditions), the tire traction
varies widely.

Flat tire
268
>> Practical hints. >Unscrew the valve cap from the tire valve of
the damaged tire.
>Pull off the stopper of filler hose
4.
>Screw the end of filler hose
4
onto the tire
valve.
>Insert electrical plug
6
into the auxiliary
power outlet (

page 164).
>Insert the key in the starter switch and turn
it to position1.
i
The vehicle's battery is drained by use of
the electric air pump. You should therefore
keep the engine running
in the open air

while inflating the tire.
>PressI on electric air pump switch
7.
The electric air pump is switched on and
inflates the tire.
i
First, the sealant is pumped into the tire.
The pressure may briefly increase to a high
value. This is normal and not an indication of a
malfunction. Do not switch off the electric air
pump.>Let the electric air pump inflate the tire for
a maximum of ten minutes.
Pressure gauge
2 must display at least
26 psi (1.8 bar) is reached. The filler hose
can become hot during inflation.
Please exercise appropriate caution.
!
Do not operate the electric air pump
longer than ten minutes without interruption.
Otherwise it may overheat.
You may operate the electrical air pump again
after it has cooled off.
>If the tire inflation pressure of at least
26 psi (1.8 bar) is not attained, turn off the
electric air pump by pressing0 on electric
air pump switch
7.
>Unscrew the end of filler hose
4
from the
tire valve.
>After clearing the area around the vehicle
of people and obstacles, drive vehicle back
or forth very slowly approximately 30 ft
(10 m).
This serves to better distribute the tire
sealant material inside the tire.>Screw the end of filler hose
4 onto the tire
valve.
>Inflate the tire again.
>After attaining a tire inflation pressure of
26 psi (1.8 bar), press0 on electric air
pump switch
7.
The electric air pump is switched off.
>Turn the key in the starter switch to
position0.
G
Warning!
If a tire inflation pressure of 26 psi
(1.8 bar) is not attained, the tire is too
severely damaged for the tire sealant to
provide a reliable tire repair.
In this case, the tire sealant cannot
properly seal the tire.
Do not drive the vehicle.
Contact the nearest smart center for as

sistance or call Roadside Assistance.

Towing
278
>> Practical hints.
About towingsmart recommends that the vehicle be trans

ported with all wheels off the ground using
flatbed or appropriate wheel lift/dolly equip

ment.!
Use flatbed or wheel lift/dolly equipment
with the key in the starter switch in position0.
Do not tow with sling
type equipment. Towing
with sling
type equipment over bumpy roads
will damage radiator and supports.
To prevent damage during transport, do not
tie down the vehicle by its chassis or suspen

sion parts. Use the towing eye.
Switch off the tow
away protection*
(
page 78).
When circumstances do not permit the
recommended towing methods, the vehicle
may be towed with all wheels on the ground or
front wheels raised only so far as necessary
to have the vehicle moved to a safe location
where the recommended towing methods can
be employed.
!
If the vehicle is towed with the front axle
raised, the gear selector lever must be in
neutral positionN and the engine must be shut
off (key in starter switch position0). Active
braking action through the ESP
® may other

wise seriously damage the brake system.
When towing the vehicle with all wheels on the
ground, the gear selector lever must be in
neutral positionN and the key must be in
starter switch position0.
When towing the vehicle with all wheels on the
ground or the front axle raised, the vehicle
may be towed only for distances up to 30 miles
(50 km) and at a speed not to exceed 30 mph
(50 km/h).
i
If the the battery is disconnected or dis

charged the gear selector lever will remain
locked in park position P. Contact an autho

rized smart center for assistance or call
Roadside Assistance.G
Warning!
smart does not recommend towing a vehi

cle when all wheels are on the ground.
However, in an emergency a tow bar can
be utilized if:
• the engine will not run
• there is a malfunction in the brake
system
• there is a malfunction in the power
supply or in the vehicle’s electrical
system
A tow bar is necessary to adequately con

trol the towed vehicle.
Prior to towing the vehicle with all wheels
on the ground, make sure that the key is
in starter switch position0.