2008 SMART FORTWO COUPE fuel

Tires and wheels
>> Operation
205
DOT (D
epartment o
f T
ransportation)
A tire branding symbol which denotes the tire
meets requirements of the U.S. Department of
Transportation
GAWR (G
ross A
xle W
eight R
ating)
The GAWR is the maximum permissible axle
weight. The gross vehicle weight on each axle
must never exceed the GAWR for the front and
rear axle indicated on the certification label
located on the driver’s door B
pillar.
GVW (G
ross V
ehicle W
eight)
The GVW comprises the weight of the vehicle
including fuel, tools, installed accessories,
passengers and cargo. The GVW must never
exceed the GVWR indicated on the certifi

cation label located on the driver’s door
B
pillar.GVWR (G
ross V
ehicle W
eight R
ating)
This is the maximum permissible vehicle
weight of the fully loaded vehicle (weight of
the vehicle including all options, passengers,
fuel, and cargo. It is indicated on certification
label located on the driver’s door B
pillar.
Kilopascal (kPa)
The metric unit for air pressure. There are
6.9 kPa to 1 psi; another metric unit for air
pressure is bars. There are 100 kilopascals
(kPa) to 1 bar.
Maximum load rating
The maximum load in kilograms and pounds
that can be carried by the tire.
Maximum loaded vehicle weight
The sum of curb weight, accessory weight,
total load limit and production options weight.Maximum permissible tire inflation pressure
This number is the greatest amount of air
pressure that should ever be put in the tire.
Normal occupant weight
The number of occupants the vehicle is
designed to seat, multiplied by 68 kilograms
(150 lbs).
Occupant distribution
The distribution of occupants in a vehicle at
their designated seating positions.
Production options weight
The combined weight of those installed regu

lar production options weighing over 5 lbs
(2.3 kilograms) in excess of those standard
items which they replace, not previously con

sidered in curb weight or accessory weight,
including heavy duty brakes, ride levelers,
roof rack, heavy duty battery, and special
trim.

Driving instructions
>> Operation
215 Drive sensibly
save fuel
Fuel consumption, to a great extent, depends
on driving habits and operating conditions.
To save fuel you should:
• Shift gears in a timely manner.
• Avoid frequent acceleration and decelera

tion.
• Keep tires at the recommended inflation
pressures.
• Remove carriers* when not in use.
• Remove unnecessary loads.
• Allow engine to warm up under low load use.
• Have all maintenance work performed at the
intervals specified in the Maintenance
Booklet and as required by the Maintenance
System. Contact an authorized smart cen

ter.
Fuel consumption is also increased by driving
in cold weather, in stop
and
go traffic, on
short trips, and in hilly areas.
Catalytic converterYour smart is equipped with monolithic
type
catalytic converter, an important element in
conjunction with the oxygen sensors to
achieve substantial control of the pollutants
in the exhaust emissions. Keep your vehicle in
proper operating condition by following our
recommended maintenance instructions as
outlined in your Maintenance Booklet.
G
Warning
The catalytic converter can become very
hot. Coming into contact with the catalytic
converter could result in burns.
Note the following:
• Do not remove the protective heat
guards.
• Do not apply any underseal.
• As with any vehicle, do not idle, park, or
operate this vehicle in areas where
combustible materials such as grass,
hay, or leaves can come into contact
with the hot exhaust system, as these
materials could be ignited and cause a
vehicle fire.

Driving instructions
216
>> Operation
!
To prevent damage to the catalytic
converter, only use premium unleaded gaso

line in this vehicle.
Any noticeable irregularities in engine oper

ation should be repaired promptly. Otherwise,
excessive unburned fuel may reach the cata

lytic converter, causing it to overheat and
potentially start a fire.
It is essential to observe the following points,
as there is otherwise a danger of overheating
and the catalytic converter may be damaged.
• Fill up only with premium unleaded gasoline.
Even small quantities of leaded gasoline can
damage the catalytic converter.
• Make sure you adhere to the prescribed
service intervals.
• Never run the fuel tank empty.
• If the engine starts to misfire, bring the ve

hicle to an immediate standstill without en

dangering traffic.
• If the engine fails to start the first time, you
should not try to start it any more than
three times in succession.
• Do not try to start for more than four sec

onds at a time.
TiresTreadwear indicators (TWI) are required by
law. These indicators are located in six places
on the tread circumference and become visi

ble at a tread depth of approximately
1/16in
(1.6 mm), at which point the tire is considered
worn and should be replaced. The treadwear indicator appears as a solid
band across the tread.
Specified tire inflation pressures must be
maintained. This applies particularly if the
tires are subject to high loads (e.g. high
speeds, heavy loads, high ambient tempera

tures).
G
Warning!
If you feel a sudden significant vibration
or ride disturbance, or you suspect that
possible damage to your vehicle has
occurred, you should turn on the hazard
warning flashers, carefully slow down,
and drive with caution to an area which is
a safe distance from the road.
Inspect the tires and the vehicle under

body for possible damage. If the vehicle
or tires appear unsafe, have the vehicle
towed to the nearest smart center or tire
dealer for repairs.
G
Warning!
Although the applicable federal motor
vehicle safety laws consider a tire to be
worn when the treadwear indicators (TWI)
become visible at approximately
1/16in
(1.6 mm), we recommend that you do not
allow your tires to wear down to that
level. As tread depth approaches
1/8in
(3 mm), the adhesion properties on a wet
road are sharply reduced.
Depending upon the weather and/or road
surface (conditions), the tire traction
varies widely.

Vehicle care
224
>> Operation
Care tipsRegular and proper care will help to maintain
the value of your vehicle. The best way to pro

tect your vehicle from harmful environmental
influences is to wash it and use protective
treatments regularly.
smart recommends that you care for the
paintwork at least twice a year (e.g. in the
spring and autumn).
!
Follow the care tips. Wash your vehicle
preferably by hand.
While in operation, even while parked, your
vehicle is subjected to varying external influ

ences which, if gone unchecked, can attack
the paintwork as well as the vehicle underbody
and cause lasting damage.Such damage is caused not only by extreme
and varying climatic conditions, but also by:
•Air pollution
• Road salt
•Tar
• Gravel and stone chipping
To avoid paint damage, you should
immediately remove:
•Insects
• Bird droppings
• Tree sap, etc.
• Grease and oil
•Break fluid
•Coolant
•Fuel
•Tar spots
!
Failure to remove such dirt immediately
can cause damage to the paint or the soft top
fabric*. Environmental influences are not
covered by the smart Limited Warranty.
G
Warning!
Many cleaning products can be hazard

ous. Some are poisonous, others are
flammable. Always follow the instructions
on the particular container. Always open
your vehicle’s doors or windows when
cleaning the inside.
Never use fluids or solvents that are not
designed for cleaning your vehicle.
Always lock away cleaning products and
keep them out of reach of children.

What to do if ...
240
>> Practical hints. If the tire inflation pressure in the respective
tire(s) has (have) been corrected, the combi

nation low tire pressure/TPMS malfunction
telltale goes out after a few minutes of driv

ing. See also "Restarting the TPMS"
(

page 194).
Flashes 60 seconds and then stays
illuminated:
• when there is a malfunction in the TPMS.
>Have the TPMS checked at an authorized
smart center.
After the malfunction has been remedied the
combination low tire pressure/TPMS mal

function telltale goes out after a few minutes
of driving.
G
Warning!
Each tire should be checked monthly
when cold and inflated to the inflation
pressure recommended by the vehicle
manufacturer on the Tire and Loading
Information placard on the driver’s door
B
Pillar (

page 185) . If your vehicle has
tires of a different size than the size in

dicated on the Tire and Loading Informa

tion placard you should determine the
proper tire inflation pressure for those
tires.
As an added safety feature, your vehicle
has been equipped with a tire pressure
monitoring system (TPMS) that illumi

nates a low tire pressure telltale when
one or more of your tires is significantly
underinflated.
Accordingly, when the low tire pressure
telltale illuminates, you should stop and
check your tires as soon as possible, and
inflate them to the proper pressure.
Driving on a significantly underinflated
tire causes the tire to overheat and can
lead to tire failure.
Underinflation also reduces fuel effi

ciency and tire tread life, and may affect
the vehicle’s handling and stopping
ability. Please note that the TPMS is not a
substitute for proper tire maintenance,
and it is the driver’s responsibility to
maintain correct tire pressure, even if
underinflation has not reached the level
to trigger illumination of the TPMS low
tire pressure telltale.
Your vehicle has also been equipped with
a TPMS malfunction indicator to indicate
when the system is not operating
properly. The TPMS malfunction indicator
is combined with the low tire pressure
telltale.

Unlocking/locking manually
250
>> Practical hints.
Unlocking the vehicleYou can unlock the driver’s door and the fuel
filler flap by unlocking the driver’s door using
the key. The lock cylinder is fitted with a cap.
>Press button
©
on the key.
The anti
theft warning system* is disarmed.
i
If the transmitter battery in the key is
discharged, the anti
theft warning system*
can no longer be disarmed with button
©
on
the key. For replacing the transmitter battery
(

page 253).
Unlocking the vehicle with the key and opening
a door or the tailgate will trigger the anti

theft warning system* (

page 77).
To cancel the alarm:
>Insert the key in the starter switch.
>Turn starter switch in Position 1
(

page 91).
1
Cap
2
Lock cylinder
>Remove cap
1 from lock cylinder
2.
>Unlock the driver’s door.
The driver’s door and the fuel filler flap are
unlocked.
i
To unlock the vehicle centrally press the
central unlocking switch in the upper center
console (

page 38).
Locking the vehicleIf you can no longer lock the vehicle using the
remote control and you do not have a spare
transmitter battery at hand, please proceed
as follows:
>Open the driver's door.
>Press the central locking switch
(

page 84).
The indicator lamp on central locking
switch
1 comes on, when the starter switch
is in position 1.
The indicator lamp on central locking
switch1 flashes, when the starter switch is
in Position 0.
>Remove the key from the starter switch,
take it with you, and close all doors.
The vehicle is now locked and the anti
theft
warning system* is armed. P72.10
3348
31

Flat tire
270
>> Practical hints.
!
The manufacturer is unable to guarantee
that all tire punctures can be repaired with
the tire repair kit, in particular cuts or
perforations larger than approximately
0.16 in (4 mm) or away from the tire's tread.
The manufacturer is not liable for damage
sustained through improper use of the tire
repair kit.>Drive to the nearest authorized smart cen

ter, to have the damaged tire replaced.
>Contact an authorized smart center as soon
as possible to obtain a new filler hose
4 and
a new tire sealant container
9.
>Bring used tire sealant materials to an
authorized smart center for proper dispos

al.
>Replace your tire sealant container every
4 years. Replacement containers are avail

able at any authorized smart center.
G
Warning!
Follow recommended tire inflation
pressures.
Do not overinflate tires. Overinflated
tires can adversely affect handling and
ride comfort, wear unevenly, increase
stopping distance, and result in sudden
deflation (blowout) because they are
more likely to become punctured or
damaged by road debris, potholes etc.
Do not underinflate tires. Underinflated
tires wear excessively and/or unevenly,
adversely affect handling and fuel econ

omy, and are more likely to fail from being
overheated.
Do not overload the tires by exceeding
the specified load limit as indicated on
the Tire and Loading Information placard
on the driver’s door B
pillar. Overload

ing the tires can overheat them, possibly
causing a blowout. Overloading the tires
can also result in handling or steering
problems, or brake failure.
G
Warning!
After changing a tire, contact a smart
center to make sure that the bolts holding
the wheel to the car are tight enough.
Otherwise, the wheels could come off.
Each bolt should be tightened to a torque
of 81 lb
ft (110 Nm).

Jump starting
276
>> Practical hints.
!
Do not tow start vehicle.
!
Avoid repeated and lengthy starting
attempts.
Do not attempt to start the engine using a
battery quick charge unit.
If the engine does not run after several
unsuccessful starting attempts, have it
checked at the nearest authorized smart cen

ter.
Excessive unburned fuel generated by
repeated failed starting attempts may damage
the catalytic converter and may present a fire
risk.
Make sure the jumper cables do not have loose
or missing insulation.
Make sure the cable clamps do not touch any
other metal part while the other end is still
attached to a battery.If the battery is discharged, the engine can be
started with jumper cables and the battery of
another vehicle. Observe the following:
• Jump starting should only be performed
when the engine and catalytic converter are
cold.
• Do not start the engine if the battery is
frozen. Let the battery thaw out first.
• Only jump start from batteries with the
same voltage rating (12 V). Jump starting
with a higher voltage battery could damage
the vehicle’s electrical system, which will
not be covered by the smart Limited
Warranty.
• Only use jumper cables with sufficient
cross
section and insulated terminal
clamps.
• Always make sure the jumper cables are not
on or near pulleys, fans or other parts that
move when an engine is started or running.
G
Warning!
Failure to follow these directions will
cause damage to the electronic compo

nents, and can lead to a battery explosion
and severe injury or death.
Never lean over batteries while connect

ing or jump starting, you might get in

jured.
Battery fluid contains sulfuric acid. Do
not allow this fluid to come in contact with
eyes, skin or clothing. In case it does, im

mediately flush affected area with water,
and seek medical help if necessary.
A battery will also produce hydrogen gas,
which is flammable and very explosive.
K e e p f l a m e s o r s p a r k s a w a y f r o m b a t t e r y ,
avoid improper connection of jumper
cables, smoking, etc.
Attempting to jump start a frozen battery
can result in it exploding, causing per

sonal injury.
Read all instructions before proceeding.