Replacing wiper blades
>> Practical hints.
263
>Removing: Press on retaining springs
1 on
both sides of the wiper blade.
>Fold the wiper blade away from the wiper
arm in the direction of arrow
2 and detach
it.
>Installing: Attach the new wiper blade and
fold it into a position parallel to the wiper
arm.
Retaining springs
1 must audibly engage
in the wiper arm.
>Fold the wiper arm backward to rest on the
windshield.
Make sure to hold on to the wiper when
folding the wiper arm back.
!
Make sure the wiper blades are properly
installed. Improperly installed wiper blades
may cause windshield damage.
Rear window wiper blade1
Wiper blade
2
Detaching wiper blade
>Removing: Fold the wiper arm away from the
rear window until you feel it engage.
>Fold wiper blade
1 away from the wiper
arm in the direction of arrow
2 until it
disengages from its mounting.
>Detach wiper blade
1.>Installing: Push the new wiper blade onto
the wiper arm until you feel it engage.
>Fold the wiper blade into a position parallel
to the wiper arm.
>Fold the wiper arm backward to rest on the
rear window.
Make sure to hold on to the wiper when
folding the wiper arm back.
!
Make sure the wiper blade is properly
installed. An improperly installed wiper blade
may cause rear window damage. P82.30260731
Replacing wiper blades
264
>> Practical hints.
Adjusting the washer jet nozzles1
Front washer jet nozzles
2
Rear washer jet nozzles
> Adjusting: Use a needle to move washer jet
nozzles
1 or
2 left, right, up, or down.
i
Check the setting of the washer jet nozzles
at regular intervals. The washer jet nozzles
are correctly set when the water jet hits the
windshield or the rear window approximately
in the center.P82.30260831
