2008 SMART FORTWO COUPE change wheel

4>> Keywords Battery (key)
Replacing the transmitter battery . . . . 252
Bead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
Belt guide . . . . . . . . . . . . . . . . . . . . . . . . . 94
Brake Assistant see Hydraulic brake assistant
Brake fluid . . . . . . . . . . . . . . . . . . . . . . . . 180
Brake lamp . . . . . . . . . . . . . . . . . . . . . . . . 255
Brake system
Brake pedal . . . . . . . . . . . . . . . . . . . . . . 126
Brake warning lamp . . . . . . . . . . . . . . . . . 238
Bulbs
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . 255
Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . 258
Replacing . . . . . . . . . . . . . . . . . . . . . . . 254>> CCalifornian retail buyers and lessees,
Important notice for . . . . . . . . . . . . . . . . . 18
Care
Automatic car wash . . . . . . . . . . . . . . . . 228
Soft top system . . . . . . . . . . . . . . . . . . . 230
Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . 224
Cargo compartment parcel net bag . . . . 156
Catalytic converter . . . . . . . . . . . . . . . . . 215CD*
Changer . . . . . . . . . . . . . . . . . . . . . . . . . 144
Player . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Center console,
lower . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
upper . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Central locking . . . . . . . . . . . . . . . . . . . . . 84
Automatic . . . . . . . . . . . . . . . . . . . . . . . . 84
Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Certification label . . . . . . . . . . . . . . . . . . 293
Change of address or ownership . . . . . . . . 20
Changing a wheel, see Flat tire
Checking tire pressure electronically . . 192
Children in the vehicle
Front air bags . . . . . . . . . . . . . . . . . . . . . 59
Occupant Classification System (OCS) . . 60
Passenger front air bag off indicator
lamp . . . . . . . . . . . . . . . . . . . . . . . . . 64, 245
Restraint systems* . . . . . . . . . . . . . . . . . 66
Top tether* . . . . . . . . . . . . . . . . . . . . . . . 69
Cleaning, see Care
Climate control see Air conditioning*
Clock
Adjusting . . . . . . . . . . . . . . . . . . . . . . . . 138
See also Cockpit clock*
Coat hooks . . . . . . . . . . . . . . . . . . . . . . . . 159
Cockpit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Cockpit clock* . . . . . . . . . . . . . . . . . . . . . 140
Cold tire inflation pressure . . . . . . . . . . . 204
Coming home function* . . . . . . . . . . . . . . 105
Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . 241
Anticorrosion/antifreeze . . . . . . . . . . . 310
Checking the level . . . . . . . . . . . . . . . . . 178
Composition . . . . . . . . . . . . . . . . . . . . . . 309
Cup holder . . . . . . . . . . . . . . . . . . . . . . . . 155
Curb weight . . . . . . . . . . . . . . . . . . . . . . . . 204
>> DDaily trip, see Trip odometer
Data bus
Display message . . . . . . . . . . . . . . . . . . 236
Daytime running lamp mode . . . . . . . . . . . 103
Deep water see Standing water
Defroster
Rear window . . . . . . . . . . . . . . . . . . . . . . 154
Defrosting . . . . . . . . . . . . . . . . . . . . . . . . . 149
Air conditioning with automatic
climate control* . . . . . . . . . . . . . . . . . . . 153
Rear window . . . . . . . . . . . . . . . . . . . . . . 154
Dimensions, main . . . . . . . . . . . . . . . . . . . 302

Occupant safety
>> Safety.
57
• Given the considerable deployment
speed, required inflation volume, and
the textile structure of the air bags,
there is the possibility of abrasions or
other, potentially more serious inju

ries resulting from air bag deployment.
• Air bags and Emergency Tensioning
Devices (ETDs) are designed to func

tion on a one
time
only basis. An air
bag or ETD that has deployed must be
replaced.
• Do not pass seat belts over sharp
edges. They could tear.
• Do not make any modification that could
change the effectiveness of the seat
belts.
• No modifications of any kind may be
made to any components or wiring of
the SRS. This includes changing or
removing any component or part of the
SRS, the installation of additional trim
material, badges, etc. over the steer

ing wheel hub, passenger front air bag
cover, outboard sides of the seat back

rests,
and installation of additional
electrical/electronic equipment on or
near SRS components and wiring. Keep
area between air bags and occupants
free from objects (e.g. packages,
purses, umbrellas, etc.).
• Do not bleach or dye seat belts as this
may severely weaken them. In a crash
they may not be able to provide ade

quate protection.
• Do not hang hangers on the coat hooks
or handles over the door. These items
may turn into projectiles and cause
head and other injuries when the head

thorax air bag is deployed.
• Air bag system components will be hot
after an air bag has inflated. Do not
touch.
• Never place your feet on the instru

ment panel, dashboard, or on the seat.
Always keep both feet on the floor in
front of the seat.
• In addition, improper repair work on
the SRS creates a risk of rendering the
SRS inoperative or causing unintended
air bag deployment. Work on the SRS
must therefore only be performed by
qualified technicians. Contact an
authorized smart center.
• For your protection and the protection
of others, when scrapping the air bag
unit or Emergency Tensioning Devices
(ETDs), our safety instructions must be
followed. These instructions are avail

able from any authorized smart center.

Lighting>> Controls.
105
>Switching on: Push the combination switch
in the direction of arrow
1 or
2.
The corresponding turn signals flash.
The corresponding turn signal indicator
lampL orK in the instrument
cluster flashes.
The combination switch resets automati

cally after major steering wheel movement.
i
To signal minor directional changes such
as changing lanes, push the combination
switch only to the point of resistance and
release. The corresponding turn signals will
flash three times.
Coming home functionVehicles without rain
light sensor:
The interior lamps come on and then go out
again after 12 seconds every time when you
lock or unlock the vehicle.
Vehicles with rain
light sensor*:
In addition to the interior lamps, the exterior
lamps come on and then go out again after
12 seconds depending on the brightness of
the ambient light when you lock or unlock the
vehicle.
When leaving the vehicle
>Remove the key from the starter switch.
>Exit the vehicle.
>Press button
ª
on the key.
The vehicle is locked.
The interior and exterior
1 lamps come on
and then go out again after 12 seconds.
When returning to the vehicle
>Press button
©
on the key either once or
twice.The vehicle is either selectively or globally
unlocked.
The interior and exterior
1 lamps come on
and then go out again after 12 seconds.
Front fog lamps
1 Vehicles with rain
light sensor
G
Warning!
Vehicles with rain
light sensor*:
In low ambient lighting or foggy condi

tions, only switch from positionU
toB with the vehicle at a standstill in
a safe location. Switching fromU
toB will briefly switch off the head

lamps. Doing so while driving in low ambi

ent lighting conditions may result in an
accident.

Transmission
>> Controls.
129 Shifting procedure
The transmission selects individual gears
automatically, depending on:
• the gear selector lever
positionD(

page 129)
• the position of the accelerator
(

page 131)
• the vehicle speed
• uphill or downhill grades
Press release button
1 (
page 128) to
disengage the gear selector lever lock when
moving the gear selector lever from
•P toR,N, orD
•R toP
•N toR orP
!
Allow engine to warm up under low load
use. Do not place full load on the engine until
the operating temperature has been reached.
Shift into reverse gearR or parking
positionP only when the vehicle is stopped.
Avoid spinning of a drive wheel for an extend

ed period when driving off on slippery road
surfaces. Otherwise, the the drivetrain could
be damaged, which is not covered by the smart
Limited Warranty.
With manual gearshiftingM selected
(

page 132), you can use the gear selector
lever or steering wheel gearshift control
1
to change the gears manually.
Gear selector lever positions
1 Model passion only.
Effect
ì
Park position
Gear selector lever position when
the vehicle is parked. Place the
gear selector lever in park
positionP only when the vehicle is
stopped. The park position is not
intended to serve as a brake when
the vehicle is parked.
Rather, the driver should always
set the parking brake in addition to
placing the gear selector lever in
park positionP to secure the
vehicle.
The key can only be removed from
the starter switch with the gear
selector lever in park positionP.
With the key removed, the gear
selector lever is locked in park
positionP.

Transmission
130
>> Controls.The current gear selector lever position
appears in the transmission position indicator
(

page 137).
Effect
í
Reverse gear
Shift into reverse gearR only when
vehicle is stopped.
ë
Neutral position
No power is transmitted from the
engine to the drive axle. When the
brakes are released, the vehicle
can be moved freely (pushed or
towed).
Effect
ê
Drive position
The transmission shifts auto

matically.
M
Manual gearshifting
System
controlled automatic gear

shifting is switched off. The driver
has to change the gears manually.
G
Warning!
Getting out of your vehicle with the gear
selector lever not fully engaged in park
positionP is dangerous. When the engine
is shut off and the brakes are released,
the vehicle can be moved freely with the
gear selector lever in all positions ex

cept park position P. Also, park
positionP alone is not intended to or
capable of preventing your vehicle from
moving, possibly hitting people or
objects.
Always set the parking brake in addition
to shifting to park positionP
(
page 125).
When parked on an incline, turn the front
wheels towards the road curb.
Do not park this vehicle in areas where
combustible materials such as grass, hay
or leaves can come into contact with the
hot exhaust system, as these materials
could be ignited and cause a vehicle fire.

Transmission
132
>> Controls. Driving off uphill
Your vehicle has a hill start assist system.
On uphill grades the hill start assist system
maintains the pressure in the brake system
for approximately one second after you have
released the brake pedal. Therefore, you can
start off smoothly without the vehicle moving
immediately after releasing the brake pedal.>Release the brake pedal.
>Apply sufficient pressure to the accelera

tor.
!
After approximately one second, the hill
start assist system stops braking the vehicle,
which then can roll backwards. If you open the
driver’s door within this time, the hill start as

sistance is deactivated and a warning signal
sounds.
i
The hill start assist system is inactive if
you start off with the parking brake set.
Manual gearshiftingWith manual gearshiftingM selected, system

controlled automatic gearshifting is switched
off and you need to change the gears by up

shifting or downshifting manually using the
gear selector lever or the steering wheel
gearshift control
1.
!
Allow engine to warm up under low load
use. Do not place full load on the engine until
the operating temperature has been reached.
Shift into reverse gearR or parking
positionP only when the vehicle is stopped.
Avoid spinning of a drive wheel for an extend

ed period when driving off on slippery road
surfaces. Otherwise, the the drivetrain could
be damaged, which is not covered by the smart
Limited Warranty.
G
Warning!
The hill start assist system is not
designed to function as a parking brake
and does not prevent the vehicle from
moving when parked on an incline.
Always set the parking brake in addition
to shifting to park positionP.1 Model passion only.

Tires and wheels
190
>> Operation Follow recommended cold tire inflation pres

sures listed on Tire and Loading Information
placard on the driver’s door B
pillar.
Keeping the tires properly inflated provides
the best handling, tread life and riding com

fort.
For more information, see "Important notes on
tire inflation pressure" (

page 190).
i
Data shown on Tire and Loading Informa

tion placard example are for illustration pur

poses only. Tire data are specific to each
vehicle and may vary from data shown in the
following illustration. Refer to Tire and Load

ing Information placard on vehicle for actual
data specific to your vehicle.
1
Tire and Loading Information placard
with recommended cold tire inflation
pressures
The Tire and Loading Information placard
lists the recommended cold tire inflation
pressures for maximum loaded vehicle weight.
The tire inflation pressures listed apply to the
tires installed as original equipment.Important notes on tire inflation pressure
Tire temperature and tire inflation pressure
are also increased while driving, depending
on the driving speed and the tire load.
Tire inflation pressure changes by approxi

mately 1.5 psi (0.1 bar) per 18°F (10°C) of air
temperature change. Keep this in mind when
checking tire inflation pressure where the
temperature is different from the outside
temperature.
G
Warning!
If the tire inflation pressure drops
repeatedly:
• Check the tires for punctures from
foreign objects.
• Check to see whether air is leaking
from the valves or from around the rim.

Tires and wheels
>> Operation
207
Uniform Tire Quality Grading Standards
A tire information system that provides
consumers with ratings for a tire’s traction,
temperature and treadwear. Ratings are
determined by tire manufacturers using
government testing procedures. The ratings
are molded into the sidewall of the tire.
Vehicle maximum load on the tire
Load on an individual tire that is determined
by distributing to each axle its share of the
maximum loaded vehicle weight and dividing it
by two.
Rotating tiresThoroughly clean the mounting face of the
wheels and brake disks, i.e. the inner side of
the wheels/tires each time the wheels/tires
are changed. Check for and ensure proper
tire inflation pressure.For information on wheel change, see "Flat
tire" (

page 265).
G
Warning!
Do not rotate front and rear wheels as
they have different dimensions, e.g. rim
size, wheel offset etc. Otherwise, the
handling can be affected and you could
endanger yourself and others.
G
Warning!
Have the tightening torque checked after
changing a wheel. Wheels could become
loose if not tightened with a torque of
81 lb
ft (110 Nm).
Only use genuine smart wheel bolts
specified for your vehicle’s rims.