PARKING DISTANCE CONTROL
Fault finding - Fault Finding Chart
87F
87F - 43V4 MR-372-J84-87F000$924_eng.mif
Vdiag No: 04-08PARKING DISTANCE CONTROL
Fault finding - Fault Finding Chart
ALP1 No dialogue with the computer
NOTESNone
Try the diagnostic tool on another vehicle.
Check:
–The connection between the diagnostic tool and the diagnostic socket (lead in good condition).
–The injection, engine and passenger compartment fuses.
Check for the + 12 V battery feed on track 16, for a + 12 V after ignition feed on track 1 and for earth on track 5
and on track 4 of the diagnostic socket.
Repair if necessary.
1 connector:
Switch off the ignition, and disconnect the parking distance control computer connector to check the insulation,
continuity and absence of interference resistance on the following connections:
Parking distance control computer connector
Track 1 + Before ignition (see vehicle diagram)
Track 3 Earth
Track 8 track 7 of the diagnostic socket (K line)
Repair if necessary (refer to vehicle wiring diagrams).
2 connectors:
Switch off the ignition, and disconnect the parking distance control computer 16-track connector to check the
insulation and continuity and ensure the absence of interference resistance on the following connections:
Parking distance control computer connector
Track 1 + Before ignition (see vehicle diagram)
Track 8 Earth
Track 12 track 7 of the diagnostic socket (K line)
Repair if necessary (refer to vehicle wiring diagrams).
AFTER REPAIRCarry out a complete check using the diagnostic tool.
AAP_V04_ALP1/AAP_V08_ALP1
MR-372-J84-87F000$924_eng.mif
