86A-76
MR-372-J84-86A050$944.mif
V3
LPN RADIO
Vdiag No.: C4RADIO
Fault finding - Fault Finding Chart86A
ALP 9 The 6 CD changer does not work
NOTESOnly check the customer complaint after performing a full check with the diagnostic
tool.
Ensure there are no present or stored faults.
Use the wiring diagrams Technical Note for Scénic II ph2.
Check the condition and connection of the connector for components 261 and 1272.
If the connector is faulty and if there is a repair method (see Technical Note 6015A, Repairing electrical wiring,
Wiring: Precautions for repair), repair the connector; otherwise, replace the wiring.
Has the fault disappeared?
NO
With the radio switched on, check for + battery feed on
connection 34BC and + accessories feed on
connection 34BD of the connector of component 1272.
Are the + battery and + accessories feeds present?
YES
Contact the Techline.NOCheck the continuity, insulation and the
absence of interference resistance on
connections 34BC, 34BL and 34BD between
components 261 and 1272.
YESAre the connections correct?
NO
If the connection or connections are faulty and if there is a repair procedure (see Technical Note 6015A, Electrical
wiring repair, Wiring: Precautions for repair), repair the wiring, otherwise replace the wiring.
AFTER REPAIRCarry out a complete check with the diagnostic tool.
LPN_VC4_ALP9
