ENGINE COMPARTMENT CONNECTION UNIT
Fault finding - Conformity check87G
87G-56V7 MR-372-J84-87G050$440.mif
UPC
Vdiag No.: 48, 4CENGINE COMPARTMENT CONNECTION UNIT
Fault finding - Conformity check
MAIN SCREEN
NOTESOnly carry out this conformity check after a complete check with the diagnostic tool
(fault reading and configuration checks).
Application conditions: engine stopped, + after ignition feed on.
FunctionParameter or Status
Check or ActionDisplay and Notes Fault finding
Battery voltagePR004:Battery voltage11 V < X < 13.5 V
(engine running:
X < 15.8 V)If there is a fault, refer to the
interpretation of parameter PR004.
Reverse gearET004:Reverse gear
engagedYES
NOIn the event of a fault, refer to the
interpretation of status ET004.
Oil pressureET027:Oil pressure
contactOPEN
CLOSEDNone.
+ 12 V after
ignition feedET003:+ 12 V after
ignition feed relay
controlINACTIVE
ACTIVENone.
StartingET062:UCH request to
injection or
Protection and
Switching UnitENGINE OFF
INACTIVE
+ APC
STARTINGIn the event of a fault, consult the
interpretation of status ET062.
USM_V48_CCONF/ USM_V4C_CCONF
MR-372-J84-87G050$440.mif
