2008 RENAULT SCENIC display

86D-27V1 MR-372-J84-86D050$100.mif
MULTIMEDIA NETWORK INTERFACE UNIT
Fault finding – Conformity check86D
BIC
Vdiag No.: 14
FUNCTION: MULTIMEDIA
SUB-FUNCTION: USER SELECTION (continued)
*LPN: Low Price Navigation
NOTESOnly carry out a conformity check after a complete check with the diagnostic tool. The
values shown in this conformity check are given as a guide.
Application conditions: Engine stopped, ignition on, and the radio switched on.
FunctionParameter or status
Checked or actionDisplay and notes Fault finding
ButtonET009:Repeat button (only
on Scénic II Phase 2)
PRESSED
RELEASEDIn the event of an inconsistency,
consult the interpretation of
status ET009.
ET020:"Mute" buttonIn the event of an inconsistency,
consult the interpretation of
status ET020.
ET011:+ buttonIn the event of an inconsistency,
consult the interpretation of
status ET011.
ET012:- buttonIn the event of an inconsistency,
consult the interpretation of
status ET012.
ET023:Source buttonIn the event of an inconsistency,
consult the interpretation of
status ET023.
ET025:Telephone buttonIn the event of an inconsistency,
consult the interpretation of
status ET025.
ET024:Mode button In the event of an inconsistency,
consult the interpretation of
status ET024.
Wheel actionET017:Wheel actionUPWARDS
DOWNWARDS
INACTIVEIn the event of an inconsistency,
consult the interpretation of
status ET017.

86D-28V1 MR-372-J84-86D050$100.mif
MULTIMEDIA NETWORK INTERFACE UNIT
Fault finding – Conformity check86D
BIC
Vdiag No.: 14
FUNCTION: MULTIMEDIA
SUB-FUNCTION: DISPLAY
NOTESOnly carry out a conformity check after a complete check with the diagnostic tool. The
values shown in this conformity check are given as a guide.
Application conditions: Engine stopped, ignition on, and the radio switched on.
FunctionParameter or status
Checked or actionDisplay and notes Fault finding
Side lightsET004:+12 V Side lightsOFF
ONIn the event of an
inconsistency, run fault
finding on the UCH (see 87B,
Passenger compartment
connection unit).
LightingET007:BrightnessDAY
NIGHTIn the event of an
inconsistency, consult the
interpretation of ALP 3
Steering column switch
fault.

86D-36V1 MR-372-J84-86D050$150.mif
86D
BIC
Vdiag No.: 14
NOTESOnly refer to the customer complaints after performing a complete check using
the diagnostic tool.
NO DIALOGUE WITH THE COMPUTER ALP 1
THE MULTIMEDIA SYSTEM DOES NOT SWITCH ON ALP 2
STEERING COLUMN SWITCH FAULT ALP 3
EXTERNAL TEMPERATURE DISPLAY FAULT ALP 4
BACKLIGHTING DOES NOT CHANGE WHEN THE VEHICLE LIGHTS ARE
SWITCHED ONALP 5
MULTIMEDIA NETWORK INTERFACE UNIT
Fault finding – Customer complaints

86D-43
AFTER REPAIRCarry out a complete check with the diagnostic tool.
V1 MR-372-J84-86D050$160.mif
MULTIMEDIA NETWORK INTERFACE UNIT
Fault finding – Fault Finding Chart86D
BIC
Vdiag No.: 14
ALP 4 Exterior temperature display fault
NOTESSwitch on the + after ignition feed to enter fault finding mode with the computer.
Carry out a fault finding procedure on the computer sending the exterior temperature signal:
–Scénic II Phase 2, see 87B, Passenger compartment connection unit.
–Espace IV Phase 2, see 83A, Instrument panel.
If the fault is still present, contact the Techline.
BIC_V14_ALP4