88B - 13
MULTIPLEXING
Fault finding - Configuration
88B
V4 MR-372-J84-88B050$600_eng.mif
Option: depending on equipment level
If during the multiplex network test the following message appears: No dialogue established with some computers:
check power supply and diagnostic lines before starting the test again.
–This does not prevent the multiplex network from being viewed.
–Check if too many computers have not been listed in the configuration: update the multiplex network according to
the table above. **Note:
The parking distance control is present on the multiplex network when it is fitted to the front and rear of the vehicle
(Vdiag OC only).
It is not present on the multiplex network if it is only fitted to the rear of the vehicle.
***Note:
The radio computers (which correspond to the LPN navigation) and the Multimedia Interface listed above must only
be configured with the LPN navigation (diagram version number = 04)
