2008 Peugeot 407 C ignition
[x] Cancel search: ignitionPage 26 of 211
1
28
SERVICE INDICATOR
This is a visual reminder of when the
next service is due. This service is to
be carried out according to the manu-
facturer’s servicing schedule.
Once an engine oil level indication has
been displayed, the display indicates
the total and trip distances.
If the service is overdue , each time
the ignition is switched on and for
5 seconds, the distance and the span-
n e r fl a s h .
Example: when the ignition is switched
on and for 5 seconds, the display in-
dicates that the service is overdue by
300 miles/km. The service should be
carried out very shortly.
Once the servicing and oil level infor-
mation has been displayed, the total
distance recorder resumes normal op-
eration and the spanner remains lit.
The point at which a service is due is
calculated using two parameters:
- the total distance travelled,
- the time elapsed since the last service.
The distance remaining may be
weighted by the time factor, depend-
ing on the user’s driving habits.
Engine oil temperature indicator
When the ignition is switched on or
while the vehicle is moving, this indi-
cates the engine oil temperature.
When the needle is in zone C , the
temperature is correct.
When the needle is in zone D , the
temperature is too high.
Reduce your speed to lower the tem-
perature. Operation
As soon as the ignition is switched on
and for 5 seconds, the spanner sym-
bolising the service operations is lit.
The trip recorder display shows the
d i s t a n c e r e m a i n i n g ( i n r o u n d fi g u r e s )
before the next service.
Example: when switching on the ig-
nition and for 5 seconds, the display
shows that 900 miles/km remain be-
fore the next service is due.
Page 27 of 211
1
Service indicator zero re-set
Your PEUGEOT dealer carries out this
operation after each service.
However, if you carry out the service your-
self, the re-set procedure is as follows:
Switch off the ignition,
Press and hold the trip recorder
re-set button,
Switch on the ignition.
The display begins a countdown.
When the display shows "=0" , release
the button; the spanner disappears.
Engine oil level indicator
When the ignition is switched on, the
engine oil level is indicated for approx-
imately 5 seconds, after the service
information.
Dipstick
There are 2 level marks on
the dipstick: never exceed
level A .
In position B , top up the
level via the oil reservoir
cap, using the type of oil
suited to your engine.
A = max.
B = min.
Oil level correct
Lack of oil
Flashing indicates a lack of oil which
may damage the engine.
I f t h e l a c k o f o i l i s c o n fi r m e d b y c h e c k -
ing using the dipstick, it is imperative
that the level is topped up. Oil level gauge fault
( fl a s h i n g s e g m e n t s )
Check the oil level using the dipstick.
I f t h e l e v e l i s c o r r e c t , t h e fl a s h i n g i n d i -
cates an engine oil level gauge mal-
function.
Consult a PEUGEOT dealer.
The level observed on the dipstick is
only valid if the vehicle is parked on
level ground and the engine has been
off for more than 15 minutes.
After this operation, if you wish
to disconnect the battery, lock
the vehicle and wait for at least
fi v e m i n u t e s , o t h e r w i s e t h e
zero re-set will not be registered.
Page 28 of 211
1
Service indicator zero re-set
Your PEUGEOT dealer carries out this
operation after each service.
However, if you carry out the service your-
self, the re-set procedure is as follows:
Switch off the ignition,
Press and hold the trip recorder
re-set button,
Switch on the ignition.
The display begins a countdown.
When the display shows "=0" , release
the button; the spanner disappears.
Engine oil level indicator
When the ignition is switched on, the
engine oil level is indicated for approx-
imately 5 seconds, after the service
information.
Dipstick
There are 2 level marks on
the dipstick: never exceed
level A .
In position B , top up the
level via the oil reservoir
cap, using the type of oil
suited to your engine.
A = max.
B = min.
Oil level correct
Lack of oil
Flashing indicates a lack of oil which
may damage the engine.
I f t h e l a c k o f o i l i s c o n fi r m e d b y c h e c k -
ing using the dipstick, it is imperative
that the level is topped up. Oil level gauge fault
( fl a s h i n g s e g m e n t s )
Check the oil level using the dipstick.
I f t h e l e v e l i s c o r r e c t , t h e fl a s h i n g i n d i -
cates an engine oil level gauge mal-
function.
Consult a PEUGEOT dealer.
The level observed on the dipstick is
only valid if the vehicle is parked on
level ground and the engine has been
off for more than 15 minutes.
After this operation, if you wish
to disconnect the battery, lock
the vehicle and wait for at least
fi v e m i n u t e s , o t h e r w i s e t h e
zero re-set will not be registered.
Page 31 of 211
1
32
Press the "MENU" button to gain ac-
cess to the general menu.
Select the "Trip computer" or
"Vehicle diagnostics" application us-
i n g t h e n a v i g a t o r , t h e n c o n fi r m o r p r e s s
the "MODE" button until you reach the
t r i p c o m p u t e r s c r e e n , t h e n c o n fi r m u s -
ing "OK" .
The "Trip computer" or "Vehicle diag-
nostics" menu offers various options:
- Warnings log,
- Status of the functions,
- Inputting of the distance to be trav- elled.
Warnings log
This summarises the active warning
messages, displaying them on the
multifunction display in succession.
Status of the functions
This summarises the active or inactive
status of the functions present on the
vehicle.
Distance remaining
When guidance is not activated, this
enables you to enter an approximate
distance to be travelled value.
Display on the instrument panel screen
All of the various items of trip computer
information also appear on the instru-
ment panel screen at the same time.
Distance remaining to be travelled (km or miles)
Average speed (km/h or mph)
Average consumption (l/100 or km/l or mpg)
Distance travelled (km or miles)
This is the average speed calculated
since the computer was last set to
zero (with the ignition on).
This is the distance remaining to the
destination, either calculated at any
time by the navigation if guidance is
activated or entered by the user, mi-
nus the distance covered since the
distance was entered.
If digits are missing, dashes are dis-
played in their place.
This is the average fuel consumption
since the computer was last set to zero.
This indicates the distance travelled
since the computer was last set to zero.
Access via the general menu
"TRIP" (Route) menu
Page 47 of 211
3
48
EXTERIOR MIRRORS
Automatic tilting of the mirrors in reverse gear *
T h i s f u n c t i o n a l l o w s y o u t o s e e t h e
g r o u n d ( k e r b , w a l l . . . ) w h e n c a r r y i n g
o u t p a r k i n g m a n o e u v r e s i n r e v e r s e
gear. Objects observed in the driver
a n d p a s s e n g e r m i r r o r s a r e , i n
r e a l i t y , c l o s e r t h a n t h e y a p p e a r .
T h i s m u s t b e t a k e n i n t o a c -
count in order to judge the distance of
v e h i c l e s a p p r o a c h i n g f r o m b e h i n d c o r -
r e c t l y .
Adjustment
M o v e c o n t r o l A to the right or to
t h e l e f t t o s e l e c t t h e c o r r e s p o n d i n g
mirror.
Direct control B i n a l l f o u r d i r e c -
tions to adjust.
Folding back the mirrors
electrically
- f r o m i n s i d e :
With the ignition on, move the
control A t o t h e c e n t r a l p o s i t i o n
t h e n p u l l i t r e a r w a r d s .
- f r o m o u t s i d e :
L o c k t h e v e h i c l e u s i n g t h e r e -
mote control.
This function can be deactivated.
Consult a PEUGEOT dealer.
W h e n t h e v e h i c l e i s p a r k e d , t h e e x t e r i o r
m i r r o r s c a n b e f o l d e d b a c k m a n u a l l y . Initial setting of the function
E n g a g e r e v e r s e g e a r t h e n s e l e c t a n d a d -
just the left mirror then the right mirror.
These settings will be stored.
Tilting the mirror to the parking
position
engage reverse gear,
move control A to the right or the
l e f t t o s e l e c t t h e c o r r e s p o n d i n g m i r r o r . T h e e x t e r i o r m i r r o r c o r r e s p o n d i n g t o
t h e s i d e o n w h i c h y o u a r e p a r k i n g t i l t s
downwards.
Intentional returning of the mirror to
t h e d r i v i n g p o s i t i o n :
deselect the mirror.
change out of reverse gear. After a
f e w s e c o n d s , t h e g l a s s o f t h e c o r -
r e s p o n d i n g m i r r o r r e s u m e s i t s n o r -
m a l p o s i t i o n .
T h e m i r r o r r e t u r n s t o t h e d r i v i n g p o s i -
t i o n a u t o m a t i c a l l y i f t h e v e h i c l e s p e e d
e x c e e d s 6 m p h ( 1 0 k m / h ) o r i f t h e e n -
gine is switched off.
* According to version.
Page 49 of 211
3
50
ELECTRIC ADJUSTMENT OF THE HEIGHT AND DEPTH OF THE STEERING WHEEL
W h e n s t a t i o n a r y , a d j u s t t h e h e i g h t o r
d e p t h o f t h e s t e e r i n g w h e e l b y m o v i n g
the control:
forwards or backwards to adjust
t h e d e p t h .
u p o r d o w n t o a d j u s t t h e h e i g h t .
You can activate or
deactivate this function
v i a t h e " p e r s o n a l i s a t i o n -
c o n fi g u r a t i o n " m e n u o n
t h e m u l t i f u n c t i o n d i s p l a y .
WELCOME FUNCTION
W h e n t h e d r i v e r ’ s d o o r i s o p e n e d w i t h
the ignition off, the steering wheel rises to
make access to or exit from the vehicle
easier. MANUAL STEERING WHEEL HEIGHT AND DEPTH ADJUSTMENT
W h e n t h e v e h i c l e i s s t a t i o n a r y , u n l o c k
t h e s t e e r i n g w h e e l b y p u s h i n g t h e c o n -
trol forwards.
A d j u s t t h e h e i g h t a n d d e p t h o f t h e
s t e e r i n g w h e e l t h e n l o c k b y p u l l i n g t h e
c o n t r o l f u l l y .
Reinitialisation
F o l l o w i n g r e c o n n e c t i o n o f t h e b a t t e r y ,
t h e w e l c o m e f u n c t i o n m u s t b e r e i n i t i a l -
ised:
- m o v e t h e c o n t r o l i n t h e d i r e c t i o n o f the required adjustment,
- r e l e a s e t h e c o n t r o l ,
- m o v e t h e c o n t r o l a g a i n u n t i l i t r e a c h e s i t s s t o p .
T h i s p r o c e d u r e m u s t b e c a r r i e d o u t f o r
all four directions.
Page 53 of 211
3
52
ELECTRIC FRONT SEATS
Longitudinal adjustment
Push the control forwards or backwards
to slide the seat. Driver and passenger seat cushion
height and angle adjustment
Height: t i l t t h e r e a r o f t h e c o n t r o l u p
or down.
Angle: t i l t t h e f r o n t o f t h e c o n t r o l u p
or down. Seat back angle adjustment
Tilt the control forwards or backwards
to adjust the angle of the seat back.
The electrical functions of the
d r i v e r ’ s s e a t ( w i t h t h e e x c e p -
tion of the access to the rear
s e a t s ) a r e d e a c t i v a t e d a p -
p r o x i m a t e l y o n e m i n u t e a f t e r t h e i g n i -
tion is switched off.
T o r e a c t i v a t e t h e m , o p e n t h e d o o r o r
switch on the ignition.
Page 56 of 211
3
Memorising driving positions
T h e e l e c t r i c a l a d j u s t m e n t s o f t h e d r i v -
er’s seat, steering wheel and exterior
mirrors are memorised.
T w o d r i v i n g p o s i t i o n s c a n b e m e m o -
rised using buttons M/1and M/2 . A n a u d i b l e s i g n a l c o n fi r m s t h a t a p o s i -
tion has been memorised.
M e m o r i s i n g a n e w p o s i t i o n c a n c e l s
t h e p r e v i o u s o n e .
Recalling a memorised driving
position
During access to the rear
s e a t s , t h e m e m o r i s i n g a n d r e -
c a l l i n g o f t h e d r i v i n g p o s i t i o n s
are deactivated.
Vehicle moving
K e e p b u t t o n 1 or 2 p r e s s e d d o w n
u n t i l t h e b l e e p i n d i c a t e s t h a t s e t -
t i n g o f t h e c o r r e s p o n d i n g m e m o -
r i s e d p o s i t i o n i s c o m p l e t e .
REAR HEAD RESTRAINTS
T h e r e a r h e a d r e s t r a i n t s h a v e a h i g h p o s i -
t i o n f o r u s e a n d a l o w p o s i t i o n f o r s t o r i n g .
T h e y c a n a l s o b e r e m o v e d .
T o r e m o v e t h e m , p u l l u p w a r d s f u l l y
a n d p r e s s t h e l u g .
N e v e r d r i v e w i t h t h e h e a d r e -
s t r a i n t s r e m o v e d ; t h e y m u s t
b e i n p l a c e a n d a d j u s t e d c o r -
r e c t l y .
Memorising using the controls on
the driver’s door
To memorise:
P l a c e t h e k e y i n t h e i g n i t i o n o n p o -
sition,
A d j u s t y o u r s e a t , s t e e r i n g w h e e l
and mirrors,
Press button M , then button 1 " fi r s t
d r i v i n g p o s i t i o n " o r b u t t o n 2 " s e c -
o n d d r i v i n g p o s i t i o n " w i t h i n f o u r
seconds. Ignition on, vehicle stationary
B r i e fl y p r e s s b u t t o n 1 or 2 to recall
t h e c o r r e s p o n d i n g m e m o r i s e d p o -
s i t i o n . T h e e n d o f t h e s e t t i n g i s i n -
d i c a t e d b y a b l e e p .
A f t e r r e c a l l i n g a m e m o r i s e d p o s i t i o n
a f e w t i m e s i n s u c c e s s i o n , t h e f u n c -
tion will be cancelled until the engine
is started.